Acoustic suspension

An acoustic suspension loudspeaker is a type of speaker enclosure in which a loudspeaker driver is mounted in a cabinet with a closed back and no ports or vents.

Acoustic suspension is a loudspeaker cabinet design that uses one or more loudspeaker drivers mounted in a sealed box. Acoustic suspension systems reduce bass distortion which can be caused by stiff suspensions required on drivers used for open cabinet designs.

A compact acoustic suspension loudspeaker was described in 1954 by Edgar Villchur,[1] and it was brought to commercial production by Villchur and Henry Kloss with the founding of Acoustic Research in Cambridge, Massachusetts.[2] In 1960, Villchur[3] reiterated that: The first aim of the acoustic suspension design, over and above uniformity of frequency response, compactness, and extension of response into the low-bass range, is to reduce significantly the level of bass distortion that had previously been tolerated in loudspeakers. This is accomplished by substituting an air-spring for a mechanical one. Subsequently, the theory of closed-box loudspeakers was extensively described by Richard H. Small.[4][5]

Speaker cabinets with acoustic suspension can provide well-controlled bass response, especially in comparison with an equivalently-sized speaker enclosure that has a bass reflex port or vent. The bass vent boosts low-frequency output, but with the tradeoff of introducing phase delay and accuracy problems in reproducing transient signals. Sealed boxes are generally less efficient than a bass-reflex cabinet for the same low-frequency cut-off and cabinet volume,[6] so a sealed-box speaker cabinet will need more electrical power to deliver the same amount of acoustic low-frequency bass output.

  1. ^ Cite error: The named reference Villchur1954 was invoked but never defined (see the help page).
  2. ^ Cite error: The named reference Schoenherr2008 was invoked but never defined (see the help page).
  3. ^ Cite error: The named reference Villchur1960 was invoked but never defined (see the help page).
  4. ^ Cite error: The named reference Small_CBPt1 was invoked but never defined (see the help page).
  5. ^ Cite error: The named reference Small_CBPt2 was invoked but never defined (see the help page).
  6. ^ Cite error: The named reference Small_VBPt2 was invoked but never defined (see the help page).