Antimony telluride

Antimony telluride

Electron micrograph of a seamless Bi2Te3/Sb2Te3 heterojunction and its atomic model (blue: Bi, green: Sb, red: Te)[1]
Names
Other names
antimony telluride, antimony(III) telluride, antimony telluride, diantimony tritelluride
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.014.074 Edit this at Wikidata
  • InChI=1S/2Sb.3Te/q2*+3;3*-2 checkY
    Key: RSPNQEPAQCYWKS-UHFFFAOYSA-N checkY
  • InChI=1/2Sb.3Te/q2*+3;3*-2
    Key: RSPNQEPAQCYWKS-UHFFFAOYAT
  • [Te]=[Sb][Te][Sb]=[Te]
  • [Sb+3].[Sb+3].[Te-2].[Te-2].[Te-2]
Properties
Sb2Te3
Molar mass 626.32 g·mol−1
Appearance grey solid
Density 6.50 g cm−3[2][3]
Melting point 620 °C (1,148 °F; 893 K)[2]
Band gap 0.21 eV[4]
Thermal conductivity 1.65 W/(m·K) (308 K)[5]
Structure
Rhombohedral, hR15
R3m, No. 166[6]
a = 0.4262 nm, c = 3.0435 nm
3
Hazards
NIOSH (US health exposure limits):
PEL (Permissible)
TWA 0.5 mg/m3 (as Sb)[7]
REL (Recommended)
TWA 0.5 mg/m3 (as Sb)[7]
Related compounds
Other anions
Sb2O3
Sb2S3
Sb2Se3
Other cations
As2Te3
Bi2Te3
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)

Antimony telluride is an inorganic compound with the chemical formula Sb2Te3. As is true of other pnictogen chalcogenide layered materials, it is a grey crystalline solid with layered structure. Layers consist of two atomic sheets of antimony and three atomic sheets of tellurium and are held together by weak van der Waals forces. Sb2Te3 is a narrow-gap semiconductor with a band gap 0.21 eV; it is also a topological insulator, and thus exhibits thickness-dependent physical properties.[1]

  1. ^ a b Eschbach, Markus; Młyńczak, Ewa; Kellner, Jens; Kampmeier, Jörn; Lanius, Martin; Neumann, Elmar; Weyrich, Christian; Gehlmann, Mathias; Gospodarič, Pika; Döring, Sven; Mussler, Gregor; Demarina, Nataliya; Luysberg, Martina; Bihlmayer, Gustav; Schäpers, Thomas; Plucinski, Lukasz; Blügel, Stefan; Morgenstern, Markus; Schneider, Claus M.; Grützmacher, Detlev (2015). "Realization of a vertical topological p–n junction in epitaxial Sb2Te3/Bi2Te3 heterostructures". Nature Communications. 6: 8816. arXiv:1510.02713. Bibcode:2015NatCo...6.8816E. doi:10.1038/ncomms9816. PMC 4660041. PMID 26572278.
  2. ^ a b Haynes, William M., ed. (2011). CRC Handbook of Chemistry and Physics (92nd ed.). Boca Raton, FL: CRC Press. p. 4.48. ISBN 1-4398-5511-0.
  3. ^ Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. pp. 581–582. ISBN 978-0-08-037941-8.
  4. ^ Lefebvre, I.; Lannoo, M.; Allan, G.; Ibanez, A.; Fourcade, J.; Jumas, J. C.; Beaurepaire, E. (1987). "Electronic Properties of Antimony Chalcogenides". Physical Review Letters. 59 (21): 2471–2474. Bibcode:1987PhRvL..59.2471L. doi:10.1103/PhysRevLett.59.2471. PMID 10035559.
  5. ^ Yáñez-Limón, J. M.; González-Hernández, J.; Alvarado-Gil, J. J.; Delgadillo, I.; Vargas, H. (1995). "Thermal and electrical properties of the Ge:Sb:Te system by photoacoustic and Hall measurements". Physical Review B. 52 (23): 16321–16324. Bibcode:1995PhRvB..5216321Y. doi:10.1103/PhysRevB.52.16321. PMID 9981020.
  6. ^ Kim, Won-Sa (1997). "Solid state phase equilibria in the Pt–Sb–Te system". Journal of Alloys and Compounds. 252 (1–2): 166–171. doi:10.1016/S0925-8388(96)02709-0.
  7. ^ a b NIOSH Pocket Guide to Chemical Hazards. "#0036". National Institute for Occupational Safety and Health (NIOSH).