Buffalo Lake | |
---|---|
Location | Central Alberta |
Coordinates | 52°29′33″N 112°54′56″W / 52.49250°N 112.91556°W |
Type | Mesotrophic |
Primary inflows | Parlby Creek |
Primary outflows | Tail Creek |
Catchment area | 1,440 km2 (560 sq mi) |
Basin countries | Canada |
Max. length | 17 km (11 mi) |
Max. width | 7.5 km (4.7 mi) |
Surface area | 93.5 km2 (36.1 sq mi) |
Average depth | 2.8 m (9.2 ft) |
Max. depth | 6.5 m (21 ft) |
Surface elevation | 785 m (2,575 ft) |
Islands | Tony's Island |
Settlements | Bashaw, Rochon Sands, Mirror, White Sands, Alberta |
Buffalo Lake is a large lake in central Alberta. It is located in at the limit between Camrose County, the County of Stettler No. 6 and Lacombe County, approximately 40 km (25 mi) east of Red Deer.
The lake lies in the Red Deer River basin, and has a water surface of 93.5 km2 and a drainage area of 1,440 km2.[1]
The recreational areas of Boss Hill, Rochon Sands, White Sands, Scenic Sands, Buffalo Sands. Pelican Point, Pelican View Estates (PVE), and The Narrows are established on the shores of the lake, as is the Rochon Sands Provincial Park.
Buffalo Lake is unique in Alberta in that it is actively "managed" via actively controlled inflow pumped in from the Red Deer River via Parlby Creek and outflow back into the Red Deer River via Tail Creek. Due to the lake's shallow-ness and lack of natural outflows, its water level used to fluctuate more than other lakes so projects to manage the lake's water level were built and began operation in 1996.[2]
The lake has three main bays: First is the larger Main Bay which is 6.5 meters at its deepest point and has two islands. Second is Secondary Bay which is smaller than main bay and has one large island which is privately owned. Last is Parlby Bay (also known as mirror bay) which Is a lot smaller than the other bays and has Parlby Creek flowing through it. The lake supports a decent amount of Northern Pike and Burbot. There is also another shallow bay at the most northern part of the lake called Jarvis Bay.