Butler railway station

Butler
Butler station viewed from a drone in February 2023
General information
LocationButler Boulevard, Exmouth Drive
Butler, Western Australia
Australia
Coordinates31°38′08″S 115°42′01″E / 31.635547°S 115.700269°E / -31.635547; 115.700269 (Butler Station) Edit this at Wikidata
Owned byPublic Transport Authority
Operated byPublic Transport Authority
Line(s)     Yanchep line
Distance40.7 km (25.3 mi) from Perth Underground
Platforms2 side platforms
Tracks2
Bus routes6
Bus stands6
Bus operatorsSwan Transit
Construction
Parking891 spaces
AccessibleYes
Other information
Fare zone5
History
Opened21 September 2014
Passengers
March 20182,750 per weekday
Services
Preceding station Transperth Transperth Following station
Clarkson Yanchep line Alkimos
towards Yanchep
Location
Map
Location of Butler station

Butler railway station is a suburban railway station in Butler, a suburb of Perth, Western Australia. It is on Yanchep line, which is part of the Transperth rail network. Originally known as the Joondalup line, planning for an extension to Butler began in the late 1990s. The station was built as part of a A$240 million extension of the Joondalup line from Clarkson to Butler. Construction began on the station on 16 July 2012, and was completed on 16 May 2014, opening on 21 September 2014. On 14 July 2024, an extension north to Yanchep station opened, coinciding with the line's renaming to the Yanchep line.

Butler station has two side platforms situated in a cutting below the surrounding ground level. It is accessed from a ground-level concourse. Services run every 10 minutes during peak and every 15 minutes between peak. The journey to Perth Underground station is 40.7 kilometres (25.3 mi) and takes 38 minutes. The station is served by six regular bus routes, operated by Swan Transit under contract. To the south, these bus routes link to Clarkson station, and to the north, these bus routes link to Alkimos station.