ClubSwan 80

ClubSwan 80
Development
DesignerJuan Kouyoumdjian
LocationFinland/Italy
Year2022
No. built1 (2022)
Builder(s)Persico Marine
RoleRacer
NameClubSwan 80
Boat
Displacement42,351 lb (19,210 kg)
Draft20 ft 8 in (6.30 m) keel down
Hull
Typemonohull
Constructioncarbon fibre
LOA81.30 ft (24.78 m)
LWL78.38 ft (23.89 m)
Beam19.68 ft (6.00 m)
Engine typediesel engine
Hull appendages
Keel/board typeCanting fin keel, with weighted bulb
Ballast14,330 lb (6,500 kg)
Rudder(s)Twin spade-type rudders
Rig
Rig typeBermuda rig
Sails
SailplanFractional rigged sloop
Upwind sail area4,736 sq ft (440.0 m2)
[edit on Wikidata]

The ClubSwan 80 is a Finnish maxi yacht that was designed by Juan Kouyoumdjian as a one design racer and first built in 2022.[1][2]

The project leader is Enrico Chieffi, vice president of Nautor, with Vittorio Volontè as project manager. Giovanni Belgrano did the engineering, Scott Ferguson designed the rig and Mario Pedol of Nauta Design created the interiors.[1][2][3][4][5]

  1. ^ a b Nautor. "ClubSwan 80". nautorswan.com. Archived from the original on 12 June 2023. Retrieved 12 June 2023.
  2. ^ a b Persico Marine. "ClubSwan 80". persicomarine.com. Archived from the original on 12 June 2023. Retrieved 12 June 2023.
  3. ^ Nautor Swan (3 September 2020). "ClubSwan 80 – Born to change the Maxi Yachts World". nautorswan.com. Archived from the original on 12 June 2023. Retrieved 12 June 2023.
  4. ^ "ClubSwan 80: One-Design Racing at the Highest Level". Yachts Croatia. 5 September 2022. Archived from the original on 12 June 2023. Retrieved 12 June 2023.
  5. ^ Nautor's Swan (4 September 2022). "The ClubSwan 80 - Born to thrill". Sail-World. Archived from the original on 12 June 2023. Retrieved 12 June 2023.