Diablo Dam | |
---|---|
Location | Washington, United States |
Opening date | 1930 |
Dam and spillways | |
Type of dam | Concrete arch-gravity[1] |
Impounds | Skagit River |
Height | 389 ft (119 m)[1] |
Length | 1,180 ft (360 m)[1] |
Reservoir | |
Total capacity | 88,500 acre⋅ft (109,200,000 m3)[1] |
Catchment area | 1,103 sq mi (2,860 km2)[1] |
Surface area | 990 acres (400 ha)[1] |
Commission date | 1936 |
Turbines | 2x 64.5 MW[2] |
Installed capacity | 129 MW[2] |
Capacity factor | 61% |
Annual generation | 689,400,000 KWh[3] |
Diablo Dam is one of three dams along the upper Skagit River in Whatcom County, Washington and part of the Skagit River Hydroelectric Project that supplies Seattle with some of its power needs. The dam was built in Diablo Canyon, a gorge of solid granite with vertical walls rising 160 feet (49 m) from the river bed, yet were less than 100 feet (30 m) apart. Construction began in 1927, and was completed in 1930. The dam began generating electricity in 1936.[4]
The result was a power-generating dam that holds a reservoir known as Diablo Lake. At the time it was completed, Diablo Dam, at 389 feet (119 m), was the tallest dam in the world.[5] Water from the dam operates two main generators, each with a capacity of 64.5 MW.[2]48°42′51″N 121°07′52″W / 48.7143°N 121.1312°W The dam and its original associated power generation infrastructure were listed on the National Register of Historic Places in 1989.[6]