Diisopropyl ether

Diisopropyl ether
Names
Preferred IUPAC name
2-[(Propan-2-yl)oxy]propane
Other names
Isopropyl ether
2-Isopropoxypropane
Diisopropyl oxide
DIPE
Identifiers
3D model (JSmol)
ChEMBL
ChemSpider
ECHA InfoCard 100.003.237 Edit this at Wikidata
EC Number
  • 203-560-6
RTECS number
  • TZ5425000
UNII
UN number 1159
  • InChI=1S/C6H14O/c1-5(2)7-6(3)4/h5-6H,1-4H3 checkY
    Key: ZAFNJMIOTHYJRJ-UHFFFAOYSA-N checkY
  • InChI=1/C6H14O/c1-5(2)7-6(3)4/h5-6H,1-4H3
    Key: ZAFNJMIOTHYJRJ-UHFFFAOYAC
  • O(C(C)C)C(C)C
Properties
C6H14O
Molar mass 102.177 g·mol−1
Appearance Colorless liquid
Odor Sharp, sweet, ether-like[1]
Density 0.725 g/ml
Melting point −60 °C (−76 °F; 213 K)
Boiling point 68.5 °C (155.3 °F; 341.6 K)
2 g/L at 20 °C
Vapor pressure 119 mmHg (20°C)[1]
-79.4·10−6 cm3/mol
Hazards
GHS labelling:
GHS02: FlammableGHS07: Exclamation markGHS08: Health hazard
Danger
H225, H316, H319, H335, H336, H361, H371, H412
P201, P202, P210, P233, P240, P241, P242, P243, P260, P261, P264, P270, P271, P273, P280, P281, P303+P361+P353, P304+P340, P305+P351+P338, P308+P313, P309+P311, P312, P332+P313, P337+P313, P370+P378, P403+P233, P403+P235, P405, P501
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 1: Exposure would cause irritation but only minor residual injury. E.g. turpentineFlammability 3: Liquids and solids that can be ignited under almost all ambient temperature conditions. Flash point between 23 and 38 °C (73 and 100 °F). E.g. gasolineInstability 1: Normally stable, but can become unstable at elevated temperatures and pressures. E.g. calciumSpecial hazards (white): no code
1
3
1
Flash point −28 °C (−18 °F; 245 K)
443 °C (829 °F; 716 K)
Explosive limits 1.4–7.9%
Lethal dose or concentration (LD, LC):
8470 mg/kg (rat, oral)[2]
5000-6500 mg/kg (rabbit, oral)[2]
38,138 ppm (rat)
30,840 ppm (rabbit)
28,486 ppm (rabbit)[2]
NIOSH (US health exposure limits):
PEL (Permissible)
TWA 500 ppm (2100 mg/m3)[1]
REL (Recommended)
TWA 500 ppm (2100 mg/m3)[1]
IDLH (Immediate danger)
1400 ppm[1]
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

Diisopropyl ether is a secondary ether that is used as a solvent. It is a colorless liquid that is slightly soluble in water, but miscible with organic solvents. It is used as an extractant and an oxygenate gasoline additive. It is obtained industrially as a byproduct in the production of isopropanol by hydration of propylene.[3] Diisopropyl ether is sometimes represented by the abbreviation DIPE.

  1. ^ a b c d e NIOSH Pocket Guide to Chemical Hazards. "#0362". National Institute for Occupational Safety and Health (NIOSH).
  2. ^ a b c "Isopropyl ether". Immediately Dangerous to Life or Health Concentrations (IDLH). National Institute for Occupational Safety and Health (NIOSH).
  3. ^ Sakuth, Michael; Mensing, Thomas; Schuler, Joachim; Heitmann, Wilhelm; Strehlke, Günther; Mayer (2010). "Ethers, Aliphatic". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a10_023.pub2. ISBN 978-3527306732.