An evaporative light scattering detector (ELSD) is a destructive chromatography detector, used in conjunction with high-performance liquid chromatography (HPLC),[1] ultra high-performance liquid chromatography (UHPLC),[2] purification liquid chromatography such as flash or preparative chromatography (using a splitter), countercurrent or centrifugal partition chromatography and supercritical fluid chromatography (SFC). It is commonly used for analysis of compounds that do not absorb UV-VIS radiation significantly, such as sugars, antiviral drugs, antibiotics, fatty acids, lipids, oils, phospholipids, polymers, surfactants, terpenoids and triglycerides.[3][4]
ELSDs works by nebulizing the column's effluents into a fine aerosol mist, which then passes through a heated drift tube, where the solvent evaporates. Thus, it can be easily used in gradient method of LC and SFC.[5] The remaining non-volatile analyte particles are carried further by a carrier gas to a light scattering cell, where a beam of light illuminates them and they scatter it. The scattered light proceeds to a photodiode which converts it to a signal, which is proportional to the mass of the analyte particles. This is why it is considered as a sort of "universal detector"[6] as it is able to detect all compound which are less volatile than the mobile phase, i.e. non volatile and semi-volatile compounds.
ELSD is related to the charged aerosol detector (CAD), in which the aerosol is charged. Like the CAD, it falls under the category of destructive detectors.