A flat-twin engine is a two-cylinder internal combustion engine with the cylinders on opposite sides of the crankshaft. The most common type of flat-twin engine is the boxer-twin engine, where both pistons move inwards and outwards at the same time.
The flat-twin design was patented by Karl Benz in 1896 and the first production flat-twin engine was used in the Lanchester 8 hp Phaeton car released in 1900. The flat-twin engine was used in several other cars since, however a more common usage is in motorcycles; early models oriented the cylinders in line with the frame, however later models switched to the cylinders being perpendicular to the frame to provide even cooling across both cylinders.
Flat-twin engines were also used in several aircraft up until the 1930s and in various stationary applications from the 1930s to the 1960s.
The Australian lawnmower manufacturer Victa also produced a flat-twin engine push mower from August 1975 to 1980 dubbed the ‘Twin 500’, and later the ‘Supreme’. These engines were manufactured in Canada. They are very sought after as only small numbers were produced, most likely due to ignition- and fuel-related problems in early models. In the Supreme (the later model) all these problems were fixed with a rear-domed piston, crankcase mixers and refined ignition system[citation needed].