The MT75 is a rear wheel drive or four wheel drive gearbox, depending on the variant, made by the Ford Motor Company. The MT75 replaced the Ford Type 9 transmission.
The MT75 has an all alloy casing and comes with an integrated bellhousing. In 4x4 versions, the planetary gear center differential with viscous-type limited slip is integrated in to the rear half of the gearbox. The 4x4 system is of full-time type with a static torque split of 34% front, 66% rear (similarly to Type 9 4x4 models).
The MT75 has five speeds and reverse. This was the first Ford production gearbox to have a synchromesh on reverse (so reverse can be selected whilst in slight forward motion). The internal gear assembly in order from front to back as installed on the mainshaft is as follows: 4th, 3rd, 2nd, 1st, Reverse with 5th gear situated at the rear towards the output (propshaft flange), all gears are of a helical cut. Refined over time with slight improvement made to the synchro's phasing out single part synchromesh's on 1st & 2nd gear in favour of three part syncro's.
The designation breaks down as, "M" for manual, "T" for transmission, and "75" for the distance in millimetres between the main and layshaft centers.
Common failures include:
Used in the Sierra, Granada, and Scorpio II, it came in various flavours for each engine and was used in two wheel drive and four wheel drive (MT75 4x4) versions (four wheel drive in the 4x4 Sapphire Cosworth, Escort Cosworth and XR4x4). This transmission, like the Type 9, is already used in uprated classic cars and hot rods, especially if a Ford Pinto engine, a multi valve 4-cylinder or Rover V8 engine is used.
It should not be confused with the MTX-75 which is a completely different gearbox for front wheel drive models such as the Mondeo, Ford Escort (Europe) also latterly adapted for use in Jaguars & Transit connect vans.