Indian locomotive class WAP-6

WAP-6[1]
A former WAP-6 hauling Kaziranga Express
Type and origin
Power typeElectric
BuilderCLW
Build date1995–1998
Total produced17
Rebuild dateAugust, 2012
Number rebuilt22401-22416
Specifications
Configuration:
 • UICCo'-Co'
Gauge1,676 mm (5 ft 6 in)
Bogiesoriginally Flexicoil Mark IV Fabricated;converted to Co'-Co' Flexicoil Mark 1 cast bogies; primary and secondary wheel springs with bolsters
Wheel diameterNew: 1,092 mm (3 ft 7 in)
Half worn: 1,055 mm (3 ft 5+12 in)
Full worn: 1,016 mm (3 ft 4 in)
Length18.79 m (61 ft 7+34 in)
Height4.235 m (13 ft 10+34 in)
Axle load18,800 kg (41,400 lb)
Loco weight113,200 kg (249,600 lb)
Electric system/s25 kV 50 Hz AC, AC Overhead
Current pickup(s)pantograph
Traction motorsHitachi HS15250
Loco brakeAir/Hand
Train brakesAir
Safety systemsSlip control, Over voltage relay and No volt relay
Performance figures
Maximum speedIntended at 140 km/h (87 mph)
Restricted to 105 km/h (65 mph)
Power outputMax: 5,350 hp (3,990 kW)
Continuous: 5,000 hp (3,700 kW)
Tractive effortStarting:30.8 t (30 long tons; 34 short tons)
Continuous:19 t (19 long tons; 21 short tons)
Career
OperatorsIndian Railways
Numbers22400-22416
LocaleEastern Railway
WithdrawnAugust, 2012/In service as WAP-4
DispositionOne scrapped, remainder rebuilt

The Indian locomotive class WAP-6 was a class of 25 kV AC electric locomotives that was developed in the mid-1990s by Chittaranjan Locomotive Works for Indian Railways. The model name stands for broad gauge (W), AC Current (A), Passenger traffic (P) locomotive, 6th generation (6). They entered service in April 1996. A total of 17 WAP-6 units were built at CLW between 1995 and 1998.

The WAP-6 were intended to be the faster variant of the successful WAP-4, but failed trials and were restricted to a top speed of 105 km/h. Now all units have been converted to WAP-4 specifications. All were homed at Asansol (ASN) shed but after conversion reallocated to Howrah (HWH) shed.

  1. ^ "IRFCAspecs".