Interrupt

Interrupt sources and processor handling

In digital computers, an interrupt (sometimes referred to as a trap)[1] is a request for the processor to interrupt currently executing code (when permitted), so that the event can be processed in a timely manner. If the request is accepted, the processor will suspend its current activities, save its state, and execute a function called an interrupt handler (or an interrupt service routine, ISR) to deal with the event. This interruption is often temporary, allowing the software to resume[a] normal activities after the interrupt handler finishes, although the interrupt could instead indicate a fatal error.[2]

Interrupts are commonly used by hardware devices to indicate electronic or physical state changes that require time-sensitive attention. Interrupts are also commonly used to implement computer multitasking and system calls, especially in real-time computing. Systems that use interrupts in these ways are said to be interrupt-driven.[3]

  1. ^ "The Jargon File, version 4.4.7". 2003-10-27. Retrieved 20 January 2022.
  2. ^ Jonathan Corbet; Alessandro Rubini; Greg Kroah-Hartman (2005). "Linux Device Drivers, Third Edition, Chapter 10. Interrupt Handling" (PDF). O'Reilly Media. p. 269. Retrieved December 25, 2014. Then it's just a matter of cleaning up, running software interrupts, and getting back to regular work. The "regular work" may well have changed as a result of an interrupt (the handler could wake_up a process, for example), so the last thing that happens on return from an interrupt is a possible rescheduling of the processor.
  3. ^ Rosenthal, Scott (May 1995). "Basics of Interrupts". Archived from the original on 2016-04-26. Retrieved 2010-11-11.


Cite error: There are <ref group=lower-alpha> tags or {{efn}} templates on this page, but the references will not show without a {{reflist|group=lower-alpha}} template or {{notelist}} template (see the help page).