This article needs additional citations for verification. (July 2009) |
A johnboat[1] is a flat-bottomed boat[2] constructed of aluminum, fiberglass, wood, or polyethelene with one, two, or three seats, usually bench type. They are suitable for fishing, hunting and cruising. The nearly flat hull of a johnboat tends to ride over the waves rather than cut through them as a V-hull might; this shallow draft – only a few inches[2] – enables the johnboat to operate in very shallow water,[3] but limits its use to calm waters. Johnboats typically have a transom onto which an outboard motor can be mounted. They are simple, easy to maintain, and inexpensive, though with many options to upgrade. Typical options may include live wells/bait wells, side or center consoles, factory-installed decks and floors, electrical wiring, accessory pads/mountings, and casting and poling platforms.
Johnboats are available commercially between 8 and 24 feet (2.4 and 7.3 m)[2] long and 32 to 60 inches (81 to 152 cm) wide, though custom sizes may be found. The design includes an open hull, without a bilge, leaving the ribs exposed. Many users choose to cover the ribs, producing a flat, level surface.
The Wasserwacht branch of the German Red Cross has chosen johnboats for their civil protection units for use during floods.