Konica FC-1

Konica FC-1
Overview
MakerKonishiroku
Type35 mm SLR
Lens
Lens mountKonica AR
Sensor/medium
Film speedISO 25 to 1600 [manual]
Focusing
FocusManual
Exposure/metering
ExposureShutter priority, manual
Exposure meteringEV0 to EV19 @ ASA 100
Flash
FlashHot shoe, PC socket
Flash synchronization1/100 s
Shutter
Frame rateManual lever winding, unmodified.
Shutter speed range2 s to 1/1000 s
General
Battery4SR44 6 V battery
Dimensions89 × 140 × 45 mm
Weight515 g
Made inJapan
The FS-1 (basis for the FC-1, 1979 presented)[1]

The Konica FC-1 was introduced in 1980 by Konica, one year after the FS-1, but does not have the integrated winder. It was manufactured until 1983. Both models were only available in a black finish.[1][2] With top covers made from black plastic cast Konica had good experiences since the Autoreflex TC in the mid of the 70s.[3]

Like the FS-1 the FC-1 is a camera with shutter priority and so it has a aperture LED finder display. The shutter is a vertical metal focal plane shutter, like in the Konica F, the first Single-lens reflex camera by Konica in 1960. Shutter and mirror of the FC-1 are electronically controlled. The range of shutterspeeds starts at 1/1000 s and ends at 2s. The self-timer with LED electronically works, too; its delay is round about 10 s.[4] The camera has accessory terminal (use only for dedicated Konica accessories). The FC-1 does not have an on/off switch.

The film loading system of the FC-1 is noteworthy: The camera takes the film tip automatically and there is no need to fire the shutter until the first frame is reached.[2] It was named Autoload.[4] It is possible to use a separate winder, the "Auto Winder F".

Lenses are fixed with the Konica AR-bayonet.

This model was commonly paired with a Konica 40mm Hexanon AR F1.8 lens. The weight of this pancake lens, which has six lenses, is 140 g only. It got an excellent reputation.[5]