The class leader USCGC Barracuda underway. Note the boat launching ramp at the stern. The fifty caliber machine guns mount on pintles, port and starboard, just forward of the red stripe. The black smudge in the hull abaft the superstructure is the exhaust of the port engine.
| |
Class overview | |
---|---|
Name | Marine Protector-class |
Builders | Bollinger Shipyards, Lockport, Louisiana |
Operators | |
Preceded by | Point-class |
In commission | 1998–present[1] |
Completed | 77 |
Cancelled | 0 |
Active | 72 |
Retired | 6 |
General characteristics | |
Displacement | 91 long tons (204,000 lb; 92,000 kg) |
Length | 87 ft (27 m) |
Beam | 19 ft 5 in (5.92 m) |
Draft | 5 ft 7 in (1.70 m) |
Propulsion | 2 x MTU diesel engines |
Speed | Over 25 knots (46 km/h; 29 mph) |
Range | 900 nmi (1,000 mi; 1,700 km) |
Endurance | 3 days |
Complement | 10 |
Sensors and processing systems | 1 x AN/SPS-73 surface search radar |
Armament | 2 × .50 caliber M2 Browning machine guns |
Notes | [2] |
The Marine Protector-class patrol boat is a type of coastal patrol boat of the United States Coast Guard. The 87-foot-long (27 m) vessels are based on the Stan 2600 design by Damen Group and were built by Bollinger Shipyards of Lockport, Louisiana. Almost all of these boats have been delivered to the U.S. Coast Guard, which has named them after sea creatures that fly or swim. Four have been delivered to Malta and Yemen.[3]
globalsecurityWpb87
was invoked but never defined (see the help page).FlynnSmallCutters
was invoked but never defined (see the help page).