Martin Dam

Martin Dam
Location of Martin Dam in Alabama
Country	United States
Location	Elmore / Tallapoosa counties, near Dadeville, Alabama
Coordinates	32°40′49″N 85°54′39″W / 32.68028°N 85.91083°W / 32.68028; -85.91083
Construction began	1923
Opening date	1926
Dam and spillways
Type of dam	Concrete arch-gravity
Impounds	Tallapoosa River
Height	168 ft (51 m)[1]
Length	2,000 ft (610 m)[1]
Dam volume	431,000 cu yd (330,000 m3)[1]
Spillways	20x gated overflow
Spillway capacity	134,000 cu ft/s (3,800 m3/s)[1]
Reservoir
Creates	Lake Martin
Total capacity	1,622,000 acre⋅ft (2.001×109 m3)[2]
Catchment area	2,984 sq mi (7,730 km2)[2]
Surface area	39,180 acres (15,860 ha)[2]
Normal elevation	490 ft (150 m)[2] (max)
Power Station
Hydraulic head	145 ft (44 m)
Turbines	4x Francis
Installed capacity	182.5 MW[1]
Annual generation	327 million KWh
Historic site
Alabama Register of Landmarks and Heritage
Designated	January 5, 1976[3]

Martin Dam is a concrete arch gravity dam on the Tallapoosa River in Alabama in the United States, about 10 miles (16 km) southwest of Dadeville. Impounding the 40,000-acre (16,000 ha) Lake Martin, the dam was built in the 1920s to provide flood control, hydroelectric power generation and water supply. Originally known as the Cherokee Bluffs dam, the dam is named in honor of Thomas Wesley Martin, president of the Alabama Power Company during the dam's construction.^[4] The African American community of Kowaliga was submerged by Lake Martin.

Preparations for construction of Martin Dam began in 1916 as Alabama Power began to purchase lands that would be flooded by its construction. Actual work on the dam commenced in 1923 and was completed in 1926; the lake filled to capacity for the first time on April 23, 1928 after heavy upstream flooding. However, the dam was not officially dedicated until 1936.^[5] At the time of completion, Lake Martin was the largest man-made body of water in the world.^[6] Filling the reservoir submerged the towns of Sousanna and Benson (also known as Kowaliga), as well as many historic Native American sites.^[5]

The dam is 168 feet (51 m) high and 2,000 feet (610 m) long, straddling the border of Tallapoosa and Elmore Counties with the powerhouse located on the Elmore (west) side. The spillway is controlled by twenty 30 ft (9.1 m) x 16 ft (4.9 m) gates and has a total discharge capacity of 134,000 cubic feet per second (3,800 m³/s).^[1] At its full capacity of 1,622,000 acre⋅ft (2.001×10⁹ m³), Lake Martin stretches over 30 miles (48 km) up the Tallapoosa River. The lake is drawn down by an average of 10 feet (3.0 m) each winter to facilitate flood control operations at Martin Dam.^[2]

Martin Dam's powerhouse contained three Francis turbines upon its original construction in 1927, with capacities of 45.8, 41 and 40.5 megawatts (MW). A fourth generator with a capacity of 55.2 MW was incorporated in 1952, bringing the total generating capacity to 182.5 MW.^[1] The power plant generates over 327 million KWh each year.^[5]