Mercedes-Benz M272 | |
---|---|
Overview | |
Manufacturer | Mercedes-Benz |
Production | 2004–2017 |
Layout | |
Configuration | Naturally aspirated 90° V6 |
Displacement | 2.5 L (2,496 cc) 3.0 L (2,996 cc) 3.5 L (3,498 cc) |
Cylinder bore | 88 mm (3.46 in) 92.9 mm (3.66 in) |
Piston stroke | 68.4 mm (2.69 in) 82 mm (3.23 in) 86 mm (3.39 in) |
Cylinder block material | Aluminum |
Cylinder head material | Aluminum |
Valvetrain | DOHC 4 valves x cyl. with continuous VVT |
Combustion | |
Fuel system | port injection or direct injection (CGI) |
Fuel type | Gasoline or E85 (M272 929) |
Cooling system | Water cooled |
Output | |
Power output | 204–316 PS (150–232 kW; 201–312 bhp) |
Torque output | 245–365 N⋅m (181–269 lb⋅ft) |
Chronology | |
Predecessor | Mercedes-Benz M112 |
Successor | Mercedes-Benz M276 |
The Mercedes-Benz M272 engine is an automobile piston V6 engine family used in the 2000s (decade). Introduced in 2004, it is based on the M112 V6 introduced in 1998.
All M272 engines have aluminum engine blocks with a 90° V-angle with silicon/aluminum lined cylinders. The aluminum DOHC cylinder heads have 4 valves per cylinder. All have forged steel connecting rods, one-piece cast crankshaft, iron-coated aluminum pistons and a magnesium intake manifold. Like the M112, a balance shaft is installed in the engine block between the cylinder banks to deal with vibrations in the 90 degree V6 design. This essentially eliminates first and second order moments. A dual-length Variable Length Intake Manifold is fitted to optimize engine flexibility.
Continuous VVT was adopted for the first time. Featured on both the intake and exhaust camshafts, each can be varied through a range of 40 degrees. The twin spark plug system was replaced by a regular single spark plug per cylinder. New electronic coolant flow control has replaced the mechanical thermostat for improved engine warm-up and optimum control of engine temperature. Also tumble flaps are used to improve output at low engine speeds.