| OTs-20 Gnom | |
|---|---|
| Type | Revolver |
| Place of origin | Russia |
| Service history | |
| In service | MVD[1] |
| Production history | |
| Designer | TsKIB SOO |
| Manufacturer | KBP Instrument Design Bureau |
| Produced | 1994 |
| No. built | 200 |
| Specifications | |
| Mass | 1.1 kg (1.17 with ammo)[2] |
| Length | 250 mm |
| Barrel length | 100 mm (3.93 inches) |
| Width | 45 mm |
| Height | 132 mm |
| Cartridge | 12.5x40mm STs-110 |
| Action | Double action or single action |
| Muzzle velocity | 350–400 m/s (lethal ammunition)[3] 100 m/s (non-lethal ammunition)[3] |
| Feed system | 5-round cylinder |
| Sights | Fixed; front blade and rear notch |
The OTs-20 Gnom (ОЦ-20 "Гном")[4] is a Russian revolver manufactured by the KBP Instrument Design Bureau. It uses a proprietary 12.5x40mm STs-110 cartridge developed from a 32 gauge shotgun cartridge.[2][5] It can fire lead slug (STs-110-04), lead shot (STs-110-02), and armor-piercing steel-core slug (STs-110) cartridges, as well as three types of non-lethal ammunition.[3] The revolver is smooth bore and so it lacks accuracy[5] but has high muzzle velocity and stopping power.
A tactical laser projector is available that mounts on an accessory rail under the ejector rod shroud. It is turned on and off via a pressure switch that can be attached on the grip; the operator just squeezes the grip and the projector goes on or off.
The manufacturer claims that the steel-core slug can penetrate 4.5 mm of "standard body armor plate" at 25 m. They also claim that the dispersion of this bullet at this distance is about 5 cm.[2]
Roso was invoked but never defined (see the help page).Рон was invoked but never defined (see the help page).