Orders of magnitude (magnetic field)

This page lists examples of magnetic induction B in teslas and gauss produced by various sources, grouped by orders of magnitude.

The magnetic flux density does not measure how strong a magnetic field is, but only how strong the magnetic flux is in a given point or at a given distance (usually right above the magnet's surface). For the intrinsic order of magnitude of magnetic fields, see: Orders of magnitude (magnetic moment).

Note:

  • Traditionally, the magnetizing field, H, is measured in amperes per meter.
  • Magnetic induction B (also known as magnetic flux density) has the SI unit tesla [T or Wb/m2].[1]
  • One tesla is equal to 104 gauss.
  • Magnetic field drops off as the inverse cube of the distance (1/distance3) from a dipole source.
  • Energy required to produce laboratory magnetic fields increases with the square of magnetic field.[2]
  1. ^ "Bureau International des Poids et Mesures, The International System of Units (SI), 8th edition 2006" (PDF). bipm.org. 2012-10-01. Retrieved 2013-05-26.
  2. ^ Laboratory, National High Magnetic Field. "Tesla Definition - MagLab". nationalmaglab.org. Retrieved 2023-12-29.