Orthophoto

Orthographic views project at a right angle to the datum plane. Perspective views project from the surface onto the datum plane from a fixed location.
Aerophotogrammetry, orthophoto from drone, Città Alta, Bergamo, Italy.
This photo is properly projected on elevation model, yet on a single building scale, a small tilt is noticeable. This is an orthophoto, but not a true orthophoto (not all vertical features are reprojected).
This photo is assembled from several overlapping photos from UAV, completely removing any residual tilt of the buildings. This is a true orthophoto.

An orthophoto, orthophotograph, orthoimage or orthoimagery is an aerial photograph or satellite imagery geometrically corrected ("orthorectified") such that the scale is uniform: the photo or image follows a given map projection. Unlike an uncorrected aerial photograph, an orthophoto can be used to measure true distances, because it is an accurate representation of the Earth's surface, having been adjusted for topographic relief,[1] lens distortion, and camera tilt.

Orthophotographs are commonly used in geographic information systems (GIS) as a "map accurate" background image. An orthorectified image differs from "rubber sheeted" rectifications as the latter may accurately locate a number of points on each image but "stretch" the area between so scale may not be uniform across the image. A digital elevation model (DEM) is required to create an accurate orthophoto as distortions in the image due to the varying distance between the camera/sensor and different points on the ground need to be corrected. An orthoimage and a "rubber sheeted" image can both be said to have been "georeferenced"; however, the overall accuracy of the rectification varies. Software can display the orthophoto and allow an operator to digitize or place linework, text annotations or geographic symbols (such as hospitals, schools, and fire stations). Some software can process the orthophoto and produce the linework automatically.

Production of orthophotos was historically achieved using mechanical devices.[2]

The orthorectification is not always perfect and has side effect especially for the geometry of high-rise constructions.