Portal:Underwater diving

Surface-supplied diving is a mode of underwater diving using equipment supplied with breathing gas through a diver's umbilical from the surface, either from the shore or from a diving support vessel, sometimes indirectly via a diving bell. This is different from scuba diving, where the diver's breathing equipment is completely self-contained and there is no essential link to the surface. The primary advantages of conventional surface supplied diving are lower risk of drowning and considerably larger breathing gas supply than scuba, allowing longer working periods and safer decompression. Disadvantages are the absolute limitation on diver mobility imposed by the length of the umbilical, encumbrance by the umbilical, and high logistical and equipment costs compared with scuba. The disadvantages restrict use of this mode of diving to applications where the diver operates within a small area, which is common in commercial diving work.

The copper helmeted free-flow standard diving dress is the version which made commercial diving a viable occupation, and although still used in some regions, this heavy equipment has been superseded by lighter free-flow helmets, and to a large extent, lightweight demand helmets, band masks and full-face diving masks. Breathing gases used include air, heliox, nitrox and trimix.

Saturation diving is a mode of surface supplied diving in which the divers live under pressure in a saturation system or underwater habitat and are decompressed only at the end of a tour of duty.

Airline, or hookah diving, and "compressor diving" are lower technology variants also using a breathing air supply from the surface. (Full article...)

An atmospheric diving suit (ADS), or single atmosphere diving suit is a small one-person articulated submersible which resembles a suit of armour, with elaborate pressure joints to allow articulation while maintaining an internal pressure of one atmosphere. An ADS can enable diving at depths of up to 2,300 feet (700 m) for many hours by eliminating the majority of significant physiological dangers associated with deep diving. The occupant of an ADS does not need to decompress, and there is no need for special breathing gas mixtures, so there is little danger of decompression sickness or nitrogen narcosis when the ADS is functioning properly. An ADS can permit less skilled swimmers to complete deep dives, albeit at the expense of dexterity.

Atmospheric diving suits in current use include the Newtsuit, Exosuit, Hardsuit and the WASP, all of which are self-contained hard suits that incorporate propulsion units. The Hardsuit is constructed from cast aluminum (forged aluminum in a version constructed for the US Navy for submarine rescue); the upper hull is made from cast aluminum, while the bottom dome is machined aluminum. The WASP is of glass-reinforced plastic (GRP) body tube construction. (Full article...)

Scuba diving is a mode of underwater diving whereby divers use breathing equipment that is completely independent of a surface breathing gas supply, and therefore has a limited but variable endurance. The name scuba is an acronym for "Self-Contained Underwater Breathing Apparatus" and was coined by Christian J. Lambertsen in a patent submitted in 1952. Scuba divers carry their own source of breathing gas, usually compressed air, affording them greater independence and movement than surface-supplied divers, and more time underwater than free divers. Although the use of compressed air is common, a gas blend with a higher oxygen content, known as enriched air or nitrox, has become popular due to the reduced nitrogen intake during long or repetitive dives. Also, breathing gas diluted with helium may be used to reduce the effects of nitrogen narcosis during deeper dives.

Open-circuit scuba systems discharge the breathing gas into the environment as it is exhaled, and consist of one or more diving cylinders containing breathing gas at high pressure which is supplied to the diver at ambient pressure through a diving regulator. They may include additional cylinders for range extension, decompression gas or emergency breathing gas. Closed-circuit or semi-closed circuit rebreather scuba systems allow recycling of exhaled gases. The volume of gas used is reduced compared to that of open-circuit, so a smaller cylinder or cylinders may be used for an equivalent dive duration. Rebreathers extend the time spent underwater compared to open-circuit for the same metabolic gas consumption; they produce fewer bubbles and less noise than open-circuit scuba, which makes them attractive to covert military divers to avoid detection, scientific divers to avoid disturbing marine animals, and media divers to avoid bubble interference.

Scuba diving may be done recreationally or professionally in a number of applications, including scientific, military and public safety roles, but most commercial diving uses surface-supplied diving equipment when this is practicable. Scuba divers engaged in armed forces covert operations may be referred to as frogmen, combat divers or attack swimmers.

A scuba diver primarily moves underwater by using fins attached to the feet, but external propulsion can be provided by a diver propulsion vehicle, or a sled pulled from the surface. Other equipment needed for scuba diving includes a mask to improve underwater vision, exposure protection by means of a diving suit, ballast weights to overcome excess buoyancy, equipment to control buoyancy, and equipment related to the specific circumstances and purpose of the dive, which may include a snorkel when swimming on the surface, a cutting tool to manage entanglement, lights, a dive computer to monitor decompression status, and signalling devices. Scuba divers are trained in the procedures and skills appropriate to their level of certification by diving instructors affiliated to the diver certification organisations which issue these certifications. These include standard operating procedures for using the equipment and dealing with the general hazards of the underwater environment, and emergency procedures for self-help and assistance of a similarly equipped diver experiencing problems. A minimum level of fitness and health is required by most training organisations, but a higher level of fitness may be appropriate for some applications. (Full article...)

Underwater diving, as a human activity, is the practice of descending below the water's surface to interact with the environment. It is also often referred to as diving, an ambiguous term with several possible meanings, depending on context.
Immersion in water and exposure to high ambient pressure have physiological effects that limit the depths and duration possible in ambient pressure diving. Humans are not physiologically and anatomically well-adapted to the environmental conditions of diving, and various equipment has been developed to extend the depth and duration of human dives, and allow different types of work to be done.

In ambient pressure diving, the diver is directly exposed to the pressure of the surrounding water. The ambient pressure diver may dive on breath-hold (freediving) or use breathing apparatus for scuba diving or surface-supplied diving, and the saturation diving technique reduces the risk of decompression sickness (DCS) after long-duration deep dives. Atmospheric diving suits (ADS) may be used to isolate the diver from high ambient pressure. Crewed submersibles can extend depth range to full ocean depth, and remotely controlled or robotic machines can reduce risk to humans.

The environment exposes the diver to a wide range of hazards, and though the risks are largely controlled by appropriate diving skills, training, types of equipment and breathing gases used depending on the mode, depth and purpose of diving, it remains a relatively dangerous activity. Professional diving is usually regulated by occupational health and safety legislation, while recreational diving may be entirely unregulated.
Diving activities are restricted to maximum depths of about 40 metres (130 ft) for recreational scuba diving, 530 metres (1,740 ft) for commercial saturation diving, and 610 metres (2,000 ft) wearing atmospheric suits. Diving is also restricted to conditions which are not excessively hazardous, though the level of risk acceptable can vary, and fatal incidents may occur.

Recreational diving (sometimes called sport diving or subaquatics) is a popular leisure activity. Technical diving is a form of recreational diving under more challenging conditions. Professional diving (commercial diving, diving for research purposes, or for financial gain) involves working underwater. Public safety diving is the underwater work done by law enforcement, fire rescue, and underwater search and recovery dive teams. Military diving includes combat diving, clearance diving and ships husbandry.
Deep sea diving is underwater diving, usually with surface-supplied equipment, and often refers to the use of standard diving dress with the traditional copper helmet. Hard hat diving is any form of diving with a helmet, including the standard copper helmet, and other forms of free-flow and lightweight demand helmets.
The history of breath-hold diving goes back at least to classical times, and there is evidence of prehistoric hunting and gathering of seafoods that may have involved underwater swimming. Technical advances allowing the provision of breathing gas to a diver underwater at ambient pressure are recent, and self-contained breathing systems developed at an accelerated rate following the Second World War. (Full article...)

Saturation diving is diving for periods long enough to bring all tissues into equilibrium with the partial pressures of the inert components of the breathing gas used. It is a diving mode that reduces the number of decompressions divers working at great depths must undergo by only decompressing divers once at the end of the diving operation, which may last days to weeks, having them remain under pressure for the whole period. A diver breathing pressurized gas accumulates dissolved inert gas used in the breathing mixture to dilute the oxygen to a non-toxic level in the tissues, which can cause potentially fatal decompression sickness ("the bends") if permitted to come out of solution within the body tissues; hence, returning to the surface safely requires lengthy decompression so that the inert gases can be eliminated via the lungs. Once the dissolved gases in a diver's tissues reach the saturation point, however, decompression time does not increase with further exposure, as no more inert gas is accumulated.

Saturation diving takes advantage of this by having divers remain in that saturated state. When not in the water, the divers live in a sealed environment which maintains their pressurised state; this can be an ambient pressure underwater habitat or a saturation system at the surface, with transfer to and from the pressurised living quarters to the equivalent depth underwater via a closed, pressurised diving bell. This may be maintained for up to several weeks, and divers are decompressed to surface pressure only once, at the end of their tour of duty. By limiting the number of decompressions in this way, and using a conservative decompression schedule the risk of decompression sickness is significantly reduced, and the total time spent decompressing is minimised. Saturation divers typically breathe a helium–oxygen mixture to prevent nitrogen narcosis, and limit work of breathing, but at shallow depths saturation diving has been done on nitrox mixtures.

Most of the physiological and medical aspects of diving to the same depths are much the same in saturation and bell-bounce ambient pressure diving, or are less of a problem, but there are medical and psychological effects of living under saturation for extended periods.

Saturation diving is a specialized form of diving; of the 3,300 commercial divers employed in the United States in 2015, 336 were saturation divers. Special training and certification is required, as the activity is inherently hazardous, and a set of standard operating procedures, emergency procedures, and a range of specialised equipment is used to control the risk, that require consistently correct performance by all the members of an extended diving team. The combination of relatively large skilled personnel requirements, complex engineering, and bulky, heavy equipment required to support a saturation diving project make it an expensive diving mode, but it allows direct human intervention at places that would not otherwise be practical, and where it is applied, it is generally more economically viable than other options, if such exist. (Full article...)

Freediving, free-diving, free diving, breath-hold diving, or skin diving, is a mode of underwater diving that relies on breath-holding until resurfacing rather than the use of breathing apparatus such as scuba gear.

Besides the limits of breath-hold, immersion in water and exposure to high ambient pressure also have physiological effects that limit the depths and duration possible in freediving.

Examples of freediving activities are traditional fishing techniques, competitive and non-competitive freediving, competitive and non-competitive spearfishing and freediving photography, synchronised swimming, underwater football, underwater rugby, underwater hockey, underwater target shooting and snorkeling. There are also a range of "competitive apnea" disciplines; in which competitors attempt to attain great depths, times, or distances on a single breath.

Historically, the term free diving was also used to refer to scuba diving, due to the freedom of movement compared with surface supplied diving. (Full article...)

Rebreather diving is underwater diving using diving rebreathers, a class of underwater breathing apparatus which recirculate the breathing gas exhaled by the diver after replacing the oxygen used and removing the carbon dioxide metabolic product. Rebreather diving is practiced by recreational, military and scientific divers in applications where it has advantages over open circuit scuba, and surface supply of breathing gas is impracticable. The main advantages of rebreather diving are extended gas endurance, low noise levels, and lack of bubbles.

Rebreathers are generally used for scuba applications, but are also occasionally used for bailout systems for surface-supplied diving. Gas reclaim systems used for deep heliox diving use similar technology to rebreathers, as do saturation diving life-support systems, but in these applications the gas recycling equipment is not carried by the diver. Atmospheric diving suits also carry rebreather technology to recycle breathing gas as part of the life-support system, but this article covers the procedures of ambient pressure diving using rebreathers carried by the diver.

Rebreathers are generally more complex to use than open circuit scuba, and have more potential points of failure, so acceptably safe use requires a greater level of skill, attention and situational awareness, which is usually derived from understanding the systems, diligent maintenance and overlearning the practical skills of operation and fault recovery. Fault tolerant design can make a rebreather less likely to fail in a way that immediately endangers the user, and reduces the task loading on the diver which in turn may lower the risk of operator error. (Full article...)

Surface-supplied diving is a mode of underwater diving using equipment supplied with breathing gas through a diver's umbilical from the surface, either from the shore or from a diving support vessel, sometimes indirectly via a diving bell. This is different from scuba diving, where the diver's breathing equipment is completely self-contained and there is no essential link to the surface. The primary advantages of conventional surface supplied diving are lower risk of drowning and considerably larger breathing gas supply than scuba, allowing longer working periods and safer decompression. Disadvantages are the absolute limitation on diver mobility imposed by the length of the umbilical, encumbrance by the umbilical, and high logistical and equipment costs compared with scuba. The disadvantages restrict use of this mode of diving to applications where the diver operates within a small area, which is common in commercial diving work.

The copper helmeted free-flow standard diving dress is the version which made commercial diving a viable occupation, and although still used in some regions, this heavy equipment has been superseded by lighter free-flow helmets, and to a large extent, lightweight demand helmets, band masks and full-face diving masks. Breathing gases used include air, heliox, nitrox and trimix.

Saturation diving is a mode of surface supplied diving in which the divers live under pressure in a saturation system or underwater habitat and are decompressed only at the end of a tour of duty.

Airline, or hookah diving, and "compressor diving" are lower technology variants also using a breathing air supply from the surface. (Full article...)

Surface-supplied diving is a mode of underwater diving using equipment supplied with breathing gas through a diver's umbilical from the surface, either from the shore or from a diving support vessel, sometimes indirectly via a diving bell. This is different from scuba diving, where the diver's breathing equipment is completely self-contained and there is no essential link to the surface. The primary advantages of conventional surface supplied diving are lower risk of drowning and considerably larger breathing gas supply than scuba, allowing longer working periods and safer decompression. Disadvantages are the absolute limitation on diver mobility imposed by the length of the umbilical, encumbrance by the umbilical, and high logistical and equipment costs compared with scuba. The disadvantages restrict use of this mode of diving to applications where the diver operates within a small area, which is common in commercial diving work.

The copper helmeted free-flow standard diving dress is the version which made commercial diving a viable occupation, and although still used in some regions, this heavy equipment has been superseded by lighter free-flow helmets, and to a large extent, lightweight demand helmets, band masks and full-face diving masks. Breathing gases used include air, heliox, nitrox and trimix.

Saturation diving is a mode of surface supplied diving in which the divers live under pressure in a saturation system or underwater habitat and are decompressed only at the end of a tour of duty.

Airline, or hookah diving, and "compressor diving" are lower technology variants also using a breathing air supply from the surface. (Full article...)

Surface-supplied diving is a mode of underwater diving using equipment supplied with breathing gas through a diver's umbilical from the surface, either from the shore or from a diving support vessel, sometimes indirectly via a diving bell. This is different from scuba diving, where the diver's breathing equipment is completely self-contained and there is no essential link to the surface. The primary advantages of conventional surface supplied diving are lower risk of drowning and considerably larger breathing gas supply than scuba, allowing longer working periods and safer decompression. Disadvantages are the absolute limitation on diver mobility imposed by the length of the umbilical, encumbrance by the umbilical, and high logistical and equipment costs compared with scuba. The disadvantages restrict use of this mode of diving to applications where the diver operates within a small area, which is common in commercial diving work.

The copper helmeted free-flow standard diving dress is the version which made commercial diving a viable occupation, and although still used in some regions, this heavy equipment has been superseded by lighter free-flow helmets, and to a large extent, lightweight demand helmets, band masks and full-face diving masks. Breathing gases used include air, heliox, nitrox and trimix.

Saturation diving is a mode of surface supplied diving in which the divers live under pressure in a saturation system or underwater habitat and are decompressed only at the end of a tour of duty.

Airline, or hookah diving, and "compressor diving" are lower technology variants also using a breathing air supply from the surface. (Full article...)

Scuba diving is a mode of underwater diving whereby divers use breathing equipment that is completely independent of a surface breathing gas supply, and therefore has a limited but variable endurance. The name scuba is an acronym for "Self-Contained Underwater Breathing Apparatus" and was coined by Christian J. Lambertsen in a patent submitted in 1952. Scuba divers carry their own source of breathing gas, usually compressed air, affording them greater independence and movement than surface-supplied divers, and more time underwater than free divers. Although the use of compressed air is common, a gas blend with a higher oxygen content, known as enriched air or nitrox, has become popular due to the reduced nitrogen intake during long or repetitive dives. Also, breathing gas diluted with helium may be used to reduce the effects of nitrogen narcosis during deeper dives.

Open-circuit scuba systems discharge the breathing gas into the environment as it is exhaled, and consist of one or more diving cylinders containing breathing gas at high pressure which is supplied to the diver at ambient pressure through a diving regulator. They may include additional cylinders for range extension, decompression gas or emergency breathing gas. Closed-circuit or semi-closed circuit rebreather scuba systems allow recycling of exhaled gases. The volume of gas used is reduced compared to that of open-circuit, so a smaller cylinder or cylinders may be used for an equivalent dive duration. Rebreathers extend the time spent underwater compared to open-circuit for the same metabolic gas consumption; they produce fewer bubbles and less noise than open-circuit scuba, which makes them attractive to covert military divers to avoid detection, scientific divers to avoid disturbing marine animals, and media divers to avoid bubble interference.

Scuba diving may be done recreationally or professionally in a number of applications, including scientific, military and public safety roles, but most commercial diving uses surface-supplied diving equipment when this is practicable. Scuba divers engaged in armed forces covert operations may be referred to as frogmen, combat divers or attack swimmers.

A scuba diver primarily moves underwater by using fins attached to the feet, but external propulsion can be provided by a diver propulsion vehicle, or a sled pulled from the surface. Other equipment needed for scuba diving includes a mask to improve underwater vision, exposure protection by means of a diving suit, ballast weights to overcome excess buoyancy, equipment to control buoyancy, and equipment related to the specific circumstances and purpose of the dive, which may include a snorkel when swimming on the surface, a cutting tool to manage entanglement, lights, a dive computer to monitor decompression status, and signalling devices. Scuba divers are trained in the procedures and skills appropriate to their level of certification by diving instructors affiliated to the diver certification organisations which issue these certifications. These include standard operating procedures for using the equipment and dealing with the general hazards of the underwater environment, and emergency procedures for self-help and assistance of a similarly equipped diver experiencing problems. A minimum level of fitness and health is required by most training organisations, but a higher level of fitness may be appropriate for some applications. (Full article...)

Underwater diving, as a human activity, is the practice of descending below the water's surface to interact with the environment. It is also often referred to as diving, an ambiguous term with several possible meanings, depending on context.
Immersion in water and exposure to high ambient pressure have physiological effects that limit the depths and duration possible in ambient pressure diving. Humans are not physiologically and anatomically well-adapted to the environmental conditions of diving, and various equipment has been developed to extend the depth and duration of human dives, and allow different types of work to be done.

In ambient pressure diving, the diver is directly exposed to the pressure of the surrounding water. The ambient pressure diver may dive on breath-hold (freediving) or use breathing apparatus for scuba diving or surface-supplied diving, and the saturation diving technique reduces the risk of decompression sickness (DCS) after long-duration deep dives. Atmospheric diving suits (ADS) may be used to isolate the diver from high ambient pressure. Crewed submersibles can extend depth range to full ocean depth, and remotely controlled or robotic machines can reduce risk to humans.

The environment exposes the diver to a wide range of hazards, and though the risks are largely controlled by appropriate diving skills, training, types of equipment and breathing gases used depending on the mode, depth and purpose of diving, it remains a relatively dangerous activity. Professional diving is usually regulated by occupational health and safety legislation, while recreational diving may be entirely unregulated.
Diving activities are restricted to maximum depths of about 40 metres (130 ft) for recreational scuba diving, 530 metres (1,740 ft) for commercial saturation diving, and 610 metres (2,000 ft) wearing atmospheric suits. Diving is also restricted to conditions which are not excessively hazardous, though the level of risk acceptable can vary, and fatal incidents may occur.

Recreational diving (sometimes called sport diving or subaquatics) is a popular leisure activity. Technical diving is a form of recreational diving under more challenging conditions. Professional diving (commercial diving, diving for research purposes, or for financial gain) involves working underwater. Public safety diving is the underwater work done by law enforcement, fire rescue, and underwater search and recovery dive teams. Military diving includes combat diving, clearance diving and ships husbandry.
Deep sea diving is underwater diving, usually with surface-supplied equipment, and often refers to the use of standard diving dress with the traditional copper helmet. Hard hat diving is any form of diving with a helmet, including the standard copper helmet, and other forms of free-flow and lightweight demand helmets.
The history of breath-hold diving goes back at least to classical times, and there is evidence of prehistoric hunting and gathering of seafoods that may have involved underwater swimming. Technical advances allowing the provision of breathing gas to a diver underwater at ambient pressure are recent, and self-contained breathing systems developed at an accelerated rate following the Second World War. (Full article...)

Surface-supplied diving is a mode of underwater diving using equipment supplied with breathing gas through a diver's umbilical from the surface, either from the shore or from a diving support vessel, sometimes indirectly via a diving bell. This is different from scuba diving, where the diver's breathing equipment is completely self-contained and there is no essential link to the surface. The primary advantages of conventional surface supplied diving are lower risk of drowning and considerably larger breathing gas supply than scuba, allowing longer working periods and safer decompression. Disadvantages are the absolute limitation on diver mobility imposed by the length of the umbilical, encumbrance by the umbilical, and high logistical and equipment costs compared with scuba. The disadvantages restrict use of this mode of diving to applications where the diver operates within a small area, which is common in commercial diving work.

The copper helmeted free-flow standard diving dress is the version which made commercial diving a viable occupation, and although still used in some regions, this heavy equipment has been superseded by lighter free-flow helmets, and to a large extent, lightweight demand helmets, band masks and full-face diving masks. Breathing gases used include air, heliox, nitrox and trimix.

Saturation diving is a mode of surface supplied diving in which the divers live under pressure in a saturation system or underwater habitat and are decompressed only at the end of a tour of duty.

Airline, or hookah diving, and "compressor diving" are lower technology variants also using a breathing air supply from the surface. (Full article...)

Surface-supplied diving is a mode of underwater diving using equipment supplied with breathing gas through a diver's umbilical from the surface, either from the shore or from a diving support vessel, sometimes indirectly via a diving bell. This is different from scuba diving, where the diver's breathing equipment is completely self-contained and there is no essential link to the surface. The primary advantages of conventional surface supplied diving are lower risk of drowning and considerably larger breathing gas supply than scuba, allowing longer working periods and safer decompression. Disadvantages are the absolute limitation on diver mobility imposed by the length of the umbilical, encumbrance by the umbilical, and high logistical and equipment costs compared with scuba. The disadvantages restrict use of this mode of diving to applications where the diver operates within a small area, which is common in commercial diving work.

The copper helmeted free-flow standard diving dress is the version which made commercial diving a viable occupation, and although still used in some regions, this heavy equipment has been superseded by lighter free-flow helmets, and to a large extent, lightweight demand helmets, band masks and full-face diving masks. Breathing gases used include air, heliox, nitrox and trimix.

Saturation diving is a mode of surface supplied diving in which the divers live under pressure in a saturation system or underwater habitat and are decompressed only at the end of a tour of duty.

Airline, or hookah diving, and "compressor diving" are lower technology variants also using a breathing air supply from the surface. (Full article...)

In cave (and occasionally wreck) diving, line markers are used for orientation as a visual and tactile reference on a permanent guideline. Directional markers (commonly a notched acute isosceles triangle in basic outline), are also known as line arrows or Dorff arrows, and point the way to an exit. Line arrows may mark the location of a "jump" location in a cave when two are placed adjacent to each other. Two adjacent arrows facing away from each other, mark a point in the cave where the diver is equidistant from two exits. Arrow direction can be identified by feel in low visibility.

Non-directional markers ("cookies") are purely personal markers that mark specific spots, or the direction of one's chosen exit at line intersections where there are options. Their shape does not provide a tactile indication of direction as this could cause confusion in low visibility. One important reason to be adequately trained before cave diving is that incorrect marking can confuse and fatally endanger not only oneself, but also other divers. (Full article...)

Diving equipment, or underwater diving equipment, is equipment used by underwater divers to make diving activities possible, easier, safer and/or more comfortable. This may be equipment primarily intended for this purpose, or equipment intended for other purposes which is found to be suitable for diving use.

The fundamental item of diving equipment used by divers other than freedivers, is underwater breathing apparatus, such as scuba equipment, and surface-supplied diving equipment, but there are other important items of equipment that make diving safer, more convenient or more efficient. Diving equipment used by recreational scuba divers, also known as scuba gear, is mostly personal equipment carried by the diver, but professional divers, particularly when operating in the surface supplied or saturation mode, use a large amount of support equipment not carried by the diver.

Equipment which is used for underwater work or other activities which is not directly related to the activity of diving, or which has not been designed or modified specifically for underwater use by divers is not considered to be diving equipment. (Full article...)

A lifting bag is an item of diving equipment consisting of a robust and air-tight bag with straps, which is used to lift heavy objects underwater by means of the bag's buoyancy. The heavy object can either be moved horizontally underwater by the diver or sent unaccompanied to the surface.

Lift bag appropriate capacity should match the task at hand. If the lift bag is grossly oversized a runaway or otherwise out of control ascent may result. Commercially available lifting bags may incorporate dump valves to allow the operator to control the buoyancy during ascent, but this is a hazardous operation with high risk of entanglement in an uncontrolled lift or sinking. If a single bag is insufficient, multiple bags may be used, and should be distributed to suit the load.

There are also lifting bags used on land as short lift jacks for lifting cars or heavy loads or lifting bags which are used in machines as a type of pneumatic actuator which provides load over a large area. These lifting bags of the AS/CR type are for example used in the brake mechanism of rollercoasters. (Full article...)

A diving mask (also half mask, dive mask or scuba mask) is an item of diving equipment that allows underwater divers, including scuba divers, free-divers, and snorkelers, to see clearly underwater. Surface supplied divers usually use a full face mask or diving helmet, but in some systems the half mask may be used. When the human eye is in direct contact with water as opposed to air, its normal environment, light entering the eye is refracted by a different angle and the eye is unable to focus the light on the retina. By providing an air space in front of the eyes, the eye is able to focus nearly normally. The shape of the air space in the mask slightly affects the ability to focus. Corrective lenses can be fitted to the inside surface of the viewport or contact lenses may be worn inside the mask to allow normal vision for people with focusing defects.

When the diver descends, the ambient pressure rises, and it becomes necessary to equalise the pressure inside the mask with the external ambient pressure to avoid the barotrauma known as mask squeeze. This is done by allowing sufficient air to flow out through the nose into the mask to relieve the pressure difference, which requires the nose to be included in the airspace of the mask. Equalisation during ascent is automatic as excess air inside the mask easily leaks out past the seal.

A wide range of viewport shapes and internal volumes are available, and each design will generally fit some shapes of face better than others. A good comfortable fit and a reliable seal around the edges of the rubber skirt is important to the correct function of the mask. National and international standards relating to diving masks provide a means of ensuring that they are manufactured to a suitable quality. (Full article...)

A dive boat is a boat that recreational divers or professional scuba divers use to reach a dive site which they could not conveniently reach by swimming from the shore. Dive boats may be propelled by wind or muscle power, but are usually powered by internal combustion engines. Some features, like convenient access from the water, are common to all dive boats, while others depend on the specific application or region where they are used. The vessel may be extensively modified to make it fit for purpose, or may be used without much adaptation if it is already usable.

Dive boats may simply transport divers and their equipment to and from the dive site for a single dive, or may provide longer term support and shelter for day trips or periods of several consecutive days. Deployment of divers may be while moored, at anchor, or under way, (also known as live-boating or live-boat diving). There are a range of specialised procedures for boat diving, which include water entry and exit, avoiding injury by the dive boat, and keeping the dive boat crew aware of the location of the divers in the water.

There are also procedures used by the boat crew, to avoid injuring the divers in the water, keeping track of where they are during a dive, recalling the divers in an emergency, and ensuring that none are left behind. (Full article...)

A diving suit is a garment or device designed to protect a diver from the underwater environment. A diving suit may also incorporate a breathing gas supply (such as for a standard diving dress or atmospheric diving suit), but in most cases the term applies only to the environmental protective covering worn by the diver. The breathing gas supply is usually referred to separately. There is no generic term for the combination of suit and breathing apparatus alone. It is generally referred to as diving equipment or dive gear along with any other equipment necessary for the dive.

Diving suits can be divided into two classes: "soft" or ambient pressure diving suits – examples are wetsuits, dry suits, semi-dry suits and dive skins – and "hard" or atmospheric pressure diving suits, armored suits that keep the diver at atmospheric pressure at any depth within the operating range of the suit. Hot water suits are actively heated wetsuits. (Full article...)

In underwater diving, an alternative air source, or more generally alternative breathing gas source, is a secondary supply of air or other breathing gas for use by the diver in an emergency. Examples include an auxiliary demand valve, a pony bottle and bailout bottle.

An alternative air source may be fully redundant (completely independent of any part of the main air supply system) or non-redundant, if it can be compromised by any failure of the main air supply. From the diver's point of view, air supplied by a buddy or rescue diver is fully redundant, as it is unaffected by the diver's own air supply in any way, but a second regulator on a double cylinder valve or a secondary demand valve (octopus) is not redundant to the diver carrying it, as it is attached to his or her main air supply. Decompression gas can be considered an alternative gas supply only when the risk of breathing it at the current depth is acceptable.

Effective use of any alternate air source requires competence in the associated skill set. The procedures for receiving air from another diver or from one's own equipment are most effective and least likely to result in a life-threatening incident if well trained to the extent that they do not distract the diver from other essential matters. A major difference from buddy breathing is that the diver using a redundant alternative air source need not alternate breathing with the donor, which can be a substantial advantage in many circumstances. There is a further significant advantage when the alternate air source is carried by the diver using it, in that it is not necessary to locate the buddy before it is available, but this comes at the cost of extra equipment. (Full article...)

A breathing gas is a mixture of gaseous chemical elements and compounds used for respiration. Air is the most common and only natural breathing gas, but other mixtures of gases, or pure oxygen, are also used in breathing equipment and enclosed habitats. Oxygen is the essential component for any breathing gas. Breathing gases for hyperbaric use have been developed to improve on the performance of ordinary air by reducing the risk of decompression sickness, reducing the duration of decompression, reducing nitrogen narcosis or allowing safer deep diving. (Full article...)

A diving regulator or underwater diving regulator is a pressure regulator that controls the pressure of breathing gas for underwater diving. The most commonly recognised application is to reduce pressurized breathing gas to ambient pressure and deliver it to the diver, but there are also other types of gas pressure regulator used for diving applications. The gas may be air or one of a variety of specially blended breathing gases. The gas may be supplied from a scuba cylinder carried by the diver, in which case it is called a scuba regulator, or via a hose from a compressor or high-pressure storage cylinders at the surface in surface-supplied diving. A gas pressure regulator has one or more valves in series which reduce pressure from the source, and use the downstream pressure as feedback to control the delivered pressure, or the upstream pressure as feedback to prevent excessive flow rates, lowering the pressure at each stage.

The terms "regulator" and "demand valve" (DV) are often used interchangeably, but a demand valve is the final stage pressure-reduction regulator that delivers gas only while the diver is inhaling and reduces the gas pressure to approximately ambient. In single-hose demand regulators, the demand valve is either held in the diver's mouth by a mouthpiece or attached to the full-face mask or helmet. In twin-hose regulators the demand valve is included in the body of the regulator which is usually attached directly to the cylinder valve or manifold outlet, with a remote mouthpiece supplied at ambient pressure.

A pressure-reduction regulator is used to control the delivery pressure of the gas supplied to a free-flow helmet or full-face mask, in which the flow is continuous, to maintain the downstream pressure which is limited by the ambient pressure of the exhaust and the flow resistance of the delivery system (mainly the umbilical and exhaust valve) and not much influenced by the breathing of the diver. Diving rebreather systems may also use regulators to control the flow of fresh gas, and demand valves, known as automatic diluent valves, to maintain the volume in the breathing loop during descent. Gas reclaim systems and built-in breathing systems (BIBS) use a different kind of regulator to control the flow of exhaled gas to the return hose and through the topside reclaim system, or to the outside of the hyperbaric chamber, these are of the back-pressure regulator class.

The performance of a regulator is measured by the cracking pressure and added mechanical work of breathing, and the capacity to deliver breathing gas at peak inspiratory flow rate at high ambient pressures without excessive pressure drop, and without excessive dead space. For some cold water diving applications the capacity to deliver high flow rates at low ambient temperatures without jamming due to regulator freezing is important. (Full article...)

Nitrox refers to any gas mixture composed (excepting trace gases) of nitrogen and oxygen that contains less than 78% nitrogen. In the usual application, underwater diving, nitrox is normally distinguished from air and handled differently. The most common use of nitrox mixtures containing oxygen in higher proportions than atmospheric air is in scuba diving, where the reduced partial pressure of nitrogen is advantageous in reducing nitrogen uptake in the body's tissues, thereby extending the practicable underwater dive time by reducing the decompression requirement, or reducing the risk of decompression sickness (also known as the bends). The two most common recreational diving nitrox mixes are 32% and 36% oxygen, which have maximum operating depths of about 110 feet (34 meters) and 95 feet (29 meters respectively.

Nitrox is used to a lesser extent in surface-supplied diving, as these advantages are reduced by the more complex logistical requirements for nitrox compared to the use of simple low-pressure compressors for breathing gas supply. Nitrox can also be used in hyperbaric treatment of decompression illness, usually at pressures where pure oxygen would be hazardous. Nitrox is not a safer gas than compressed air in all respects; although its use can reduce the risk of decompression sickness, it increases the risks of oxygen toxicity and fire.

Though not generally referred to as nitrox, an oxygen-enriched air mixture is routinely provided at normal surface ambient pressure as oxygen therapy to patients with compromised respiration and circulation. (Full article...)

Dynamic positioning (DP) is a computer-controlled system to automatically maintain a vessel's position and heading by using its own propellers and thrusters. Position reference sensors, combined with wind sensors, motion sensors and gyrocompasses, provide information to the computer pertaining to the vessel's position and the magnitude and direction of environmental forces affecting its position. Examples of vessel types that employ DP include ships and semi-submersible mobile offshore drilling units (MODU), oceanographic research vessels, cable layer ships and cruise ships.

The computer program contains a mathematical model of the vessel that includes information pertaining to the wind and current drag of the vessel and the location of the thrusters. This knowledge, combined with the sensor information, allows the computer to calculate the required steering angle and thruster output for each thruster. This allows operations at sea where mooring or anchoring is not feasible due to deep water, congestion on the sea bottom (pipelines, templates) or other problems.

Dynamic positioning may either be absolute in that the position is locked to a fixed point over the bottom, or relative to a moving object like another ship or an underwater vehicle. One may also position the ship at a favorable angle towards wind, waves and current, called weathervaning.

Dynamic positioning is used by much of the offshore oil industry, for example in the North Sea, Persian Gulf, Gulf of Mexico, West Africa, and off the coast of Brazil. There are currently more than 1800 DP ships. (Full article...)

A diving weighting system is ballast weight added to a diver or diving equipment to counteract excess buoyancy. They may be used by divers or on equipment such as diving bells, submersibles or camera housings.

Divers wear diver weighting systems, weight belts or weights to counteract the buoyancy of other diving equipment, such as diving suits and aluminium diving cylinders, and buoyancy of the diver. The scuba diver must be weighted sufficiently to be slightly negatively buoyant at the end of the dive when most of the breathing gas has been used, and needs to maintain neutral buoyancy at safety or obligatory decompression stops. During the dive, buoyancy is controlled by adjusting the volume of air in the buoyancy compensation device (BCD) and, if worn, the dry suit, in order to achieve negative, neutral, or positive buoyancy as needed. The amount of weight required is determined by the maximum overall positive buoyancy of the fully equipped but unweighted diver anticipated during the dive, with an empty buoyancy compensator and normally inflated dry suit. This depends on the diver's mass and body composition, buoyancy of other diving gear worn (especially the diving suit), water salinity, weight of breathing gas consumed, and water temperature. It normally is in the range of 2 kilograms (4.4 lb) to 15 kilograms (33 lb). The weights can be distributed to trim the diver to suit the purpose of the dive.

Surface-supplied divers may be more heavily weighted to facilitate underwater work, and may be unable to achieve neutral buoyancy, and rely on the diving stage, bell, umbilical, lifeline, shotline or jackstay for returning to the surface.

Free divers may also use weights to counteract buoyancy of a wetsuit. However, they are more likely to weight for neutral buoyancy at a specific depth, and their weighting must take into account not only the compression of the suit with depth, but also the compression of the air in their lungs, and the consequent loss of buoyancy. As they have no decompression obligation, they do not have to be neutrally buoyant near the surface at the end of a dive.

If the weights have a method of quick release, they can provide a useful rescue mechanism: they can be dropped in an emergency to provide an instant increase in buoyancy which should return the diver to the surface. Dropping weights increases the risk of barotrauma and decompression sickness due to the possibility of an uncontrollable ascent to the surface. This risk can only be justified when the emergency is life-threatening or the risk of decompression sickness is small, as is the case in free diving and scuba diving when the dive is well short of the no-decompression limit for the depth. Often divers take great care to ensure the weights are not dropped accidentally, and heavily weighted divers may arrange their weights so subsets of the total weight can be dropped individually, allowing for a somewhat more controlled emergency ascent.

The weights are generally made of lead because of its high density, reasonably low cost, ease of casting into suitable shapes, and resistance to corrosion. The lead can be cast in blocks, cast shapes with slots for straps, or shaped as pellets known as "shot" and carried in bags. There is some concern that lead diving weights may constitute a toxic hazard to users and environment, but little evidence of significant risk. (Full article...)

There are several categories of decompression equipment used to help divers decompress, which is the process required to allow divers to return to the surface safely after spending time underwater at higher ambient pressures.

Decompression obligation for a given dive profile must be calculated and monitored to ensure that the risk of decompression sickness is controlled. Some equipment is specifically for these functions, both during planning before the dive and during the dive. Other equipment is used to mark the underwater position of the diver, as a position reference in low visibility or currents, or to assist the diver's ascent and control the depth.

Decompression may be shortened ("accelerated") by breathing an oxygen-rich "decompression gas" such as a nitrox blend or pure oxygen. The high partial pressure of oxygen in such decompression mixes produces the effect known as the oxygen window. This decompression gas is often carried by scuba divers in side-slung cylinders. Cave divers who can only return by a single route, can leave decompression gas cylinders attached to the guideline ("stage" or "drop cylinders") at the points where they will be used. Surface-supplied divers will have the composition of the breathing gas controlled at the gas panel.

Divers with long decompression obligations may be decompressed inside gas filled hyperbaric chambers in the water or at the surface, and in the extreme case, saturation divers are only decompressed at the end of a project, contract, or tour of duty that may be several weeks long. (Full article...)

A diving cylinder or diving gas cylinder is a gas cylinder used to store and transport high pressure gas used in diving operations. This may be breathing gas used with a scuba set, in which case the cylinder may also be referred to as a scuba cylinder, scuba tank or diving tank. When used for an emergency gas supply for surface supplied diving or scuba, it may be referred to as a bailout cylinder or bailout bottle. It may also be used for surface-supplied diving or as decompression gas . A diving cylinder may also be used to supply inflation gas for a dry suit or buoyancy compensator. Cylinders provide gas to the diver through the demand valve of a diving regulator or the breathing loop of a diving re-breather.

Diving cylinders are usually manufactured from aluminum or steel alloys, and when used on a scuba set are normally fitted with one of two common types of cylinder valve for filling and connection to the regulator. Other accessories such as manifolds, cylinder bands, protective nets and boots and carrying handles may be provided. Various configurations of harness may be used by the diver to carry a cylinder or cylinders while diving, depending on the application. Cylinders used for scuba typically have an internal volume (known as water capacity) of between 3 and 18 litres (0.11 and 0.64 cu ft) and a maximum working pressure rating from 184 to 300 bars (2,670 to 4,350 psi). Cylinders are also available in smaller sizes, such as 0.5, 1.5 and 2 litres, however these are usually used for purposes such as inflation of surface marker buoys, dry suits and buoyancy compensators rather than breathing. Scuba divers may dive with a single cylinder, a pair of similar cylinders, or a main cylinder and a smaller "pony" cylinder, carried on the diver's back or clipped onto the harness at the side. Paired cylinders may be manifolded together or independent. In technical diving, more than two scuba cylinders may be needed.

When pressurized, the gas is compressed up to several hundred times atmospheric pressure. The selection of an appropriate set of diving cylinders for a diving operation is based on the amount of gas required to safely complete the dive. Diving cylinders are most commonly filled with air, but because the main components of air can cause problems when breathed underwater at higher ambient pressure, divers may choose to breathe from cylinders filled with mixtures of gases other than air. Many jurisdictions have regulations that govern the filling, recording of contents, and labeling for diving cylinders. Periodic testing and inspection of diving cylinders is often obligatory to ensure the safety of operators of filling stations. Pressurized diving cylinders are considered dangerous goods for commercial transportation, and regional and international standards for colouring and labeling may also apply. (Full article...)

Trimix is a breathing gas consisting of oxygen, helium and nitrogen and is used in deep commercial diving, during the deep phase of dives carried out using technical diving techniques, and in advanced recreational diving.

The helium is included as a substitute for some of the nitrogen, to reduce the narcotic effect of the breathing gas at depth. With a mixture of three gases it is possible to create mixes suitable for different depths or purposes by adjusting the proportions of each gas. Oxygen content can be optimised for the depth to limit the risk of toxicity, and the inert component balanced between nitrogen (which is cheap but narcotic) and helium (which is not narcotic and reduces work of breathing, but is more expensive and increases heat loss).

The mixture of helium and oxygen with a 0% nitrogen content is generally known as heliox. This is frequently used as a breathing gas in deep commercial diving operations, where it is often recycled to save the expensive helium component. Analysis of two-component gases is much simpler than three-component gases. (Full article...)

To prevent or minimize decompression sickness, divers must properly plan and monitor decompression. Divers follow a decompression model to safely allow the release of excess inert gases dissolved in their body tissues, which accumulated as a result of breathing at ambient pressures greater than surface atmospheric pressure. Decompression models take into account variables such as depth and time of dive, breathing gasses, altitude, and equipment to develop appropriate procedures for safe ascent.

Decompression may be continuous or staged, where the ascent is interrupted by stops at regular depth intervals, but the entire ascent is part of the decompression, and ascent rate can be critical to harmless elimination of inert gas. What is commonly known as no-decompression diving, or more accurately no-stop decompression, relies on limiting ascent rate for avoidance of excessive bubble formation. Staged decompression may include deep stops depending on the theoretical model used for calculating the ascent schedule. Omission of decompression theoretically required for a dive profile exposes the diver to significantly higher risk of symptomatic decompression sickness, and in severe cases, serious injury or death. The risk is related to the severity of exposure and the level of supersaturation of tissues in the diver. Procedures for emergency management of omitted decompression and symptomatic decompression sickness have been published. These procedures are generally effective, but vary in effectiveness from case to case.

The procedures used for decompression depend on the mode of diving, the available equipment, the site and environment, and the actual dive profile. Standardized procedures have been developed which provide an acceptable level of risk in the circumstances for which they are appropriate. Different sets of procedures are used by commercial, military, scientific and recreational divers, though there is considerable overlap where similar equipment is used, and some concepts are common to all decompression procedures. In particular, all types of surface oriented diving benefited significantly from the acceptance of personal dive computers in the 1990s, which facilitated decompression practice and allowed more complex dive profiles at acceptable levels of risk. (Full article...)

Scuba gas planning is the aspect of dive planning and of gas management which deals with the calculation or estimation of the amounts and mixtures of gases to be used for a planned dive. It may assume that the dive profile, including decompression, is known, but the process may be iterative, involving changes to the dive profile as a consequence of the gas requirement calculation, or changes to the gas mixtures chosen. Use of calculated reserves based on planned dive profile and estimated gas consumption rates rather than an arbitrary pressure is sometimes referred to as rock bottom gas management. The purpose of gas planning is to ensure that for all reasonably foreseeable contingencies, the divers of a team have sufficient breathing gas to safely return to a place where more breathing gas is available. In almost all cases this will be the surface.

Gas planning includes the following aspects:

• Choice of breathing gases
• Choice of scuba configuration
• Estimation of gas required for the planned dive, including bottom gas, travel gas, and decompression gases, as appropriate to the profile.
• Estimation of gas quantities for reasonably foreseeable contingencies. Under stress it is likely that a diver will increase breathing rate and decrease swimming speed. Both of these lead to a higher gas consumption during an emergency exit or ascent.
• Choice of cylinders to carry the required gases. Each cylinder volume and working pressure must be sufficient to contain the required quantity of gas.
• Calculation of the pressures for each of the gases in each of the cylinders to provide the required quantities.
• Specifying the critical pressures of relevant gas mixtures for appropriate stages (waypoints) of the planned dive profile (gas matching).

Gas planning is one of the stages of scuba gas management. The other stages include:

• Knowledge of personal and team members' gas consumption rates under varying conditions
  • basic consumption at the surface for variations in workload
  • variation in consumption due to depth variation
  • variation in consumption due to dive conditions and personal physical and mental condition
• Monitoring the contents of the cylinders during a dive
• Awareness of the critical pressures and using them to manage the dive
• Efficient use of the available gas during the planned dive and during an emergency
• Limiting the risk of equipment malfunctions that could cause a loss of breathing gas

The term "rock bottom gas planning" is used for the method of gas planning based on a planned dive profile where a reasonably accurate estimate of the depths, times, and level of activity is available, so the calculations for gas mixtures and the appropriate quantities of each mixture are known well enough to make fairly rigorous calculations useful. Simpler, easier, and fairly arbitrary rules of thumb are commonly used for dives which do not require long decompression stops. These methods are often adequate for low risk dives, but relying on them for more complex dive plans can put divers at significantly greater risk if they are unaware of the limitations of each method and apply them inappropriately. (Full article...)

Buddy breathing is a rescue technique used in scuba diving "out-of-gas" emergencies, when two divers share one demand valve, alternately breathing from it. Techniques have been developed for buddy breathing from both twin-hose and single hose regulators, but to a large extent it has been superseded by safer and more reliable techniques using additional equipment, such as the use of a bailout cylinder or breathing through a secondary demand valve on the rescuer's regulator.

Running out of breathing gas most commonly happens as a result of poor gas management. It can also happen due to unforeseen exertion or breathing equipment failure. Equipment failure resulting in the loss of all gas could be caused by failure of a pressure retaining component such as an O-ring or hose in the regulator or, in cold conditions, a freezing of water in the regulator resulting in a free flow from the demand valve. (Full article...)

The decompression of a diver is the reduction in ambient pressure experienced during ascent from depth. It is also the process of elimination of dissolved inert gases from the diver's body which accumulate during ascent, largely during pauses in the ascent known as decompression stops, and after surfacing, until the gas concentrations reach equilibrium. Divers breathing gas at ambient pressure need to ascend at a rate determined by their exposure to pressure and the breathing gas in use. A diver who only breathes gas at atmospheric pressure when free-diving or snorkelling will not usually need to decompress. Divers using an atmospheric diving suit do not need to decompress as they are never exposed to high ambient pressure.


When a diver descends in the water, the hydrostatic pressure, and therefore the ambient pressure, rises. Because breathing gas is supplied at ambient pressure, some of this gas dissolves into the diver's blood and is transferred by the blood to other tissues. Inert gas such as nitrogen or helium continues to be taken up until the gas dissolved in the diver is in a state of equilibrium with the breathing gas in the diver's lungs, at which point the diver is saturated for that depth and breathing mixture, or the depth, and therefore the pressure, is changed, or the partial pressures of the gases are changed by modifying the breathing gas mixture. During ascent, the ambient pressure is reduced, and at some stage the inert gases dissolved in any given tissue will be at a higher concentration than the equilibrium state and start to diffuse out again. If the pressure reduction is sufficient, excess gas may form bubbles, which may lead to decompression sickness, a possibly debilitating or life-threatening condition. It is essential that divers manage their decompression to avoid excessive bubble formation and decompression sickness. A mismanaged decompression usually results from reducing the ambient pressure too quickly for the amount of gas in solution to be eliminated safely. These bubbles may block arterial blood supply to tissues or directly cause tissue damage. If the decompression is effective, the asymptomatic venous microbubbles present after most dives are eliminated from the diver's body in the alveolar capillary beds of the lungs. If they are not given enough time, or more bubbles are created than can be eliminated safely, the bubbles grow in size and number causing the symptoms and injuries of decompression sickness. The immediate goal of controlled decompression is to avoid development of symptoms of bubble formation in the tissues of the diver, and the long-term goal is to avoid complications due to sub-clinical decompression injury.


The mechanisms of bubble formation and the damage bubbles cause has been the subject of medical research for a considerable time and several hypotheses have been advanced and tested. Tables and algorithms for predicting the outcome of decompression schedules for specified hyperbaric exposures have been proposed, tested and used, and in many cases, superseded. Although constantly refined and generally considered acceptably reliable, the actual outcome for any individual diver remains slightly unpredictable. Although decompression retains some risk, this is now generally considered acceptable for dives within the well tested range of normal recreational and professional diving. Nevertheless, currently popular decompression procedures advise a 'safety stop' additional to any stops required by the algorithm, usually of about three to five minutes at 3 to 6 metres (10 to 20 ft), particularly 1 on an otherwise continuous no-stop ascent.


Decompression may be continuous or staged. A staged decompression ascent is interrupted by decompression stops at calculated depth intervals, but the entire ascent is actually part of the decompression and the ascent rate is critical to harmless elimination of inert gas. A no-decompression dive, or more accurately, a dive with no-stop decompression, relies on limiting the ascent rate for avoidance of excessive bubble formation in the fastest tissues. The elapsed time at surface pressure immediately after a dive is also an important part of decompression and can be thought of as the last decompression stop of a dive. It can take up to 24 hours for the body to return to its normal atmospheric levels of inert gas saturation after a dive. When time is spent on the surface between dives this is known as the "surface interval" and is considered when calculating decompression requirements for the subsequent dive.


Efficient decompression requires the diver to ascend fast enough to establish as high a decompression gradient, in as many tissues, as safely possible, without provoking the development of symptomatic bubbles. This is facilitated by the highest acceptably safe oxygen partial pressure in the breathing gas, and avoiding gas changes that could cause counterdiffusion bubble formation or growth. The development of schedules that are both safe and efficient has been complicated by the large number of variables and uncertainties, including personal variation in response under varying environmental conditions and workload. (Full article...)

Scuba skills are skills required to dive safely using self-contained underwater breathing apparatus, known as a scuba set. Most of these skills are relevant to both open-circuit scuba and rebreather scuba, and many also apply to surface-supplied diving. Some scuba skills, which are critical to divers' safety, may require more practice than standard recreational training provides to achieve reliable competence.

Some skills are generally accepted by recreational diver certification agencies as basic and necessary in order to dive without direct supervision. Others are more advanced, although some diver certification and accreditation organizations may require these to endorse entry-level competence. Instructors assess divers on these skills during basic and advanced training. Divers are expected to remain competent at their level of certification, either by practice or through refresher courses. Some certification organizations recommend refresher training if a diver has a lapse of more than six to twelve months without a dive.

Skill categories include selection, functional testing, preparation and transport of scuba equipment, dive planning, preparation for a dive, kitting up for the dive, water entry, descent, breathing underwater, monitoring the dive profile (depth, time, and decompression status), personal breathing gas management, situational awareness, communicating with the dive team, buoyancy and trim control, mobility in the water, ascent, emergency and rescue procedures, exit from the water, removal of equipment after the dive, cleaning and preparation of equipment for storage and recording the dive, within the scope of the diver's certification. (Full article...)

Gas blending for scuba diving (or gas mixing) is the filling of diving cylinders with non-air breathing gases such as nitrox, trimix and heliox. Use of these gases is generally intended to improve overall safety of the planned dive, by reducing the risk of decompression sickness and/or nitrogen narcosis, and may improve ease of breathing.

Filling cylinders with a mixture of gases has dangers for both the filler and the diver. During filling there is a risk of fire due to use of oxygen and a risk of explosion due to the use of high-pressure gases. The composition of the mix must be safe for the depth and duration of the planned dive. If the concentration of oxygen is too lean the diver may lose consciousness due to hypoxia and if it is too rich the diver may suffer oxygen toxicity. The concentration of inert gases, such as nitrogen and helium, are planned and checked to avoid nitrogen narcosis and decompression sickness.

Methods used include batch mixing by partial pressure or by mass fraction, and continuous blending processes. Completed blends are analysed for composition for the safety of the user. Gas blenders may be required by legislation to prove competence if filling for other persons. (Full article...)

The diving supervisor is the professional diving team member who is directly responsible for the diving operation's safety and the management of any incidents or accidents that may occur during the operation; the supervisor is required to be available at the control point of the diving operation for the diving operation's duration, and to manage the planned dive and any contingencies that may occur. Details of competence, requirements, qualifications, registration and formal appointment differ depending on jurisdiction and relevant codes of practice. Diving supervisors are used in commercial diving, military diving, public safety diving and scientific diving operations.

The control point is the place where the supervisor can best monitor the status of the diver and progress of the dive. For scuba dives this is commonly on deck of the dive boat where there is a good view of the surface above the operational area, or on the shore at a nearby point where the divers can be seen when surfaced. For surface supplied diving, the view of the water is usually still necessary, and a view of the line tenders handling the umbilicals is also required, unless there is live video feed from the divers and two-way audio communications with the tenders. The control position also includes the gas panel and communications panel, so the supervisor can remain as fully informed as practicable of the status of the divers and their life support systems during the dive. For bell diving and saturation diving the situation is more complex and the control position may well be inside a compartment where the communications, control and monitoring equipment for the bell and life-support systems are set up.

In recreational diving the term is used to refer to persons managing a recreational dive, with certification such as Divemaster,
Dive Control Specialist, Dive Coordinator, etc. (Full article...)

Dive planning is the process of planning an underwater diving operation. The purpose of dive planning is to increase the probability that a dive will be completed safely and the goals achieved. Some form of planning is done for most underwater dives, but the complexity and detail considered may vary enormously.

Professional diving operations are usually formally planned and the plan documented as a legal record that due diligence has been done for health and safety purposes. Recreational dive planning may be less formal, but for complex technical dives, can be as formal, detailed and extensive as most professional dive plans. A professional diving contractor will be constrained by the code of practice, standing orders or regulatory legislation covering a project or specific operations within a project, and is responsible for ensuring that the scope of work to be done is within the scope of the rules relevant to that work. A recreational (including technical) diver or dive group is generally less constrained, but nevertheless is almost always restricted by some legislation, and often also the rules of the organisations to which the divers are affiliated.

The planning of a diving operation may be simple or complex. In some cases the processes may have to be repeated several times before a satisfactory plan is achieved, and even then the plan may have to be modified on site to suit changed circumstances. The final product of the planning process may be formally documented or, in the case of recreational divers, an agreement on how the dive will be conducted. A diving project may consist of a number of related diving operations.

A documented dive plan may contain elements from the following list:

• Overview of diving activities
• Schedule of diving operations
• Specific dive plan information
• Budget

(Full article...)

Ice diving is a type of penetration diving where the dive takes place under ice. Because diving under ice places the diver in an overhead environment typically with only a single entry/exit point, it requires special procedures and equipment. Ice diving is done for purposes of recreation, scientific research, public safety (usually search and rescue/recovery) and other professional or commercial reasons.

The most obvious hazards of ice diving are getting lost under the ice, hypothermia, and regulator failure due to freezing. Scuba divers are generally tethered for safety. This means that the diver wears a harness to which a line is secured, and the other end of the line is secured above the surface and monitored by an attendant. Surface supplied equipment inherently provides a tether, and reduces the risks of regulator first stage freezing as the first stage can be managed by the surface team, and the breathing gas supply is less limited. For the surface support team, the hazards include freezing temperatures and falling through thin ice. (Full article...)

Altitude diving is underwater diving using scuba or surface supplied diving equipment where the surface is 300 metres (980 ft) or more above sea level (for example, a mountain lake). Altitude is significant in diving because it affects the decompression requirement for a dive, so that the stop depths and decompression times used for dives at altitude are different from those used for the same dive profile at sea level. The U.S. Navy tables recommend that no alteration be made for dives at altitudes lower than 91 metres (299 ft) and for dives between 91 and 300 meters correction is required for dives deeper than 44 metres (144 ft) of sea water. Most recently manufactured decompression computers can automatically compensate for altitude. (Full article...)

Ear clearing, clearing the ears or equalization is any of various maneuvers to equalize the pressure in the middle ear with the outside pressure, by letting air enter along the Eustachian tubes, as this does not always happen automatically when the pressure in the middle ear is lower than the outside pressure. This need can arise in scuba diving, freediving/spearfishing, skydiving, fast descent in an aircraft, fast descent in a mine cage, and being put into pressure in a caisson or similar internally pressurised enclosure, or sometimes even simply travelling at fast speeds in an automobile.

Normally the ears will clear automatically during a reduction in ambient pressure, but if they do not, a reverse squeeze may occur, which can also require clearing to avoid causing injury to the eardrum or inner ear.

People who do intense weight lifting, such as squats, may experience sudden conductive hearing loss due to air pressure building up inside the ear. An ear clearing maneuver will often relieve pressure in the middle ear, or pain if any. (Full article...)

Diver communications are the methods used by divers to communicate with each other or with surface members of the dive team. In professional diving, diver communication is usually between a single working diver and the diving supervisor at the surface control point. This is considered important both for managing the diving work, and as a safety measure for monitoring the condition of the diver. The traditional method of communication was by line signals, but this has been superseded by voice communication, and line signals are now used in emergencies when voice communications have failed. Surface supplied divers often carry a closed circuit video camera on the helmet which allows the surface team to see what the diver is doing and to be involved in inspection tasks. This can also be used to transmit hand signals to the surface if voice communications fails. Underwater slates may be used to write text messages which can be shown to other divers, and there are some dive computers which allow a limited number of pre-programmed text messages to be sent through-water to other divers or surface personnel with compatible equipment.

Communication between divers and between surface personnel and divers is imperfect at best, and non-existent at worst, as a consequence of the physical characteristics of water. This prevents divers from performing at their full potential. Voice communication is the most generally useful format underwater, as visual forms are more affected by visibility, and written communication and signing are relatively slow and restricted by diving equipment.

Recreational divers do not usually have access to voice communication equipment, and it does not generally work with a standard scuba demand valve mouthpiece, so they use other signals. Hand signals are generally used when visibility allows, and there are a range of commonly used signals, with some variations. These signals are often also used by professional divers to communicate with other divers. There is also a range of other special purpose non-verbal signals, mostly used for safety and emergency communications. (Full article...)

Buddy diving is the use of the buddy system by scuba divers and freedivers. It is a set of safety procedures intended to improve the chances of avoiding or surviving accidents in or under water by having divers dive in a group of two or sometimes three. When using the buddy system, members of the group dive together and co-operate with each other, so that they can help or rescue each other in the event of an emergency. This is most effective if both divers are competent in all relevant skills and sufficiently aware of the situation that they can respond in time, which is a matter of both attitude and competence.

In recreational diving, a pair of divers is usually considered best for buddy diving. With threesomes, one diver can easily lose the attention of the other two, and groups of more than three divers are not using the buddy system. The system is likely to be effective in mitigating out-of-air emergencies, non-diving medical emergencies and entrapment in ropes or nets. When used with the buddy check it can help avoid the omission, misuse and failure of diving equipment.

In technical diving activities such as cave diving, threesomes are considered an acceptable practice. This is usually referred to as team diving to distinguish it from buddy diving in pairs.

When professional divers dive as buddy pairs their responsibility to each other is specified as part of standard operating procedures, code of practice or governing legislation. (Full article...)

Saturation diving is diving for periods long enough to bring all tissues into equilibrium with the partial pressures of the inert components of the breathing gas used. It is a diving mode that reduces the number of decompressions divers working at great depths must undergo by only decompressing divers once at the end of the diving operation, which may last days to weeks, having them remain under pressure for the whole period. A diver breathing pressurized gas accumulates dissolved inert gas used in the breathing mixture to dilute the oxygen to a non-toxic level in the tissues, which can cause potentially fatal decompression sickness ("the bends") if permitted to come out of solution within the body tissues; hence, returning to the surface safely requires lengthy decompression so that the inert gases can be eliminated via the lungs. Once the dissolved gases in a diver's tissues reach the saturation point, however, decompression time does not increase with further exposure, as no more inert gas is accumulated.

Saturation diving takes advantage of this by having divers remain in that saturated state. When not in the water, the divers live in a sealed environment which maintains their pressurised state; this can be an ambient pressure underwater habitat or a saturation system at the surface, with transfer to and from the pressurised living quarters to the equivalent depth underwater via a closed, pressurised diving bell. This may be maintained for up to several weeks, and divers are decompressed to surface pressure only once, at the end of their tour of duty. By limiting the number of decompressions in this way, and using a conservative decompression schedule the risk of decompression sickness is significantly reduced, and the total time spent decompressing is minimised. Saturation divers typically breathe a helium–oxygen mixture to prevent nitrogen narcosis, and limit work of breathing, but at shallow depths saturation diving has been done on nitrox mixtures.

Most of the physiological and medical aspects of diving to the same depths are much the same in saturation and bell-bounce ambient pressure diving, or are less of a problem, but there are medical and psychological effects of living under saturation for extended periods.

Saturation diving is a specialized form of diving; of the 3,300 commercial divers employed in the United States in 2015, 336 were saturation divers. Special training and certification is required, as the activity is inherently hazardous, and a set of standard operating procedures, emergency procedures, and a range of specialised equipment is used to control the risk, that require consistently correct performance by all the members of an extended diving team. The combination of relatively large skilled personnel requirements, complex engineering, and bulky, heavy equipment required to support a saturation diving project make it an expensive diving mode, but it allows direct human intervention at places that would not otherwise be practical, and where it is applied, it is generally more economically viable than other options, if such exist. (Full article...)

Freediving, free-diving, free diving, breath-hold diving, or skin diving, is a mode of underwater diving that relies on breath-holding until resurfacing rather than the use of breathing apparatus such as scuba gear.

Besides the limits of breath-hold, immersion in water and exposure to high ambient pressure also have physiological effects that limit the depths and duration possible in freediving.

Examples of freediving activities are traditional fishing techniques, competitive and non-competitive freediving, competitive and non-competitive spearfishing and freediving photography, synchronised swimming, underwater football, underwater rugby, underwater hockey, underwater target shooting and snorkeling. There are also a range of "competitive apnea" disciplines; in which competitors attempt to attain great depths, times, or distances on a single breath.

Historically, the term free diving was also used to refer to scuba diving, due to the freedom of movement compared with surface supplied diving. (Full article...)

In chemistry, solubility is the ability of a substance, the solute, to form a solution with another substance, the solvent. Insolubility is the opposite property, the inability of the solute to form such a solution.

The extent of the solubility of a substance in a specific solvent is generally measured as the concentration of the solute in a saturated solution, one in which no more solute can be dissolved. At this point, the two substances are said to be at the solubility equilibrium. For some solutes and solvents, there may be no such limit, in which case the two substances are said to be "miscible in all proportions" (or just "miscible").

The solute can be a solid, a liquid, or a gas, while the solvent is usually solid or liquid. Both may be pure substances, or may themselves be solutions. Gases are always miscible in all proportions, except in very extreme situations, and a solid or liquid can be "dissolved" in a gas only by passing into the gaseous state first.

The solubility mainly depends on the composition of solute and solvent (including their pH and the presence of other dissolved substances) as well as on temperature and pressure. The dependency can often be explained in terms of interactions between the particles (atoms, molecules, or ions) of the two substances, and of thermodynamic concepts such as enthalpy and entropy.

Under certain conditions, the concentration of the solute can exceed its usual solubility limit. The result is a supersaturated solution, which is metastable and will rapidly exclude the excess solute if a suitable nucleation site appears.

The concept of solubility does not apply when there is an irreversible chemical reaction between the two substances, such as the reaction of calcium hydroxide with hydrochloric acid; even though one might say, informally, that one "dissolved" the other. The solubility is also not the same as the rate of solution, which is how fast a solid solute dissolves in a liquid solvent. This property depends on many other variables, such as the physical form of the two substances and the manner and intensity of mixing.

The concept and measure of solubility are extremely important in many sciences besides chemistry, such as geology, biology, physics, and oceanography, as well as in engineering, medicine, agriculture, and even in non-technical activities like painting, cleaning, cooking, and brewing. Most chemical reactions of scientific, industrial, or practical interest only happen after the reagents have been dissolved in a suitable solvent. Water is by far the most common such solvent.

The term "soluble" is sometimes used for materials that can form colloidal suspensions of very fine solid particles in a liquid. The quantitative solubility of such substances is generally not well-defined, however. (Full article...)

Work of breathing (WOB) is the energy expended to inhale and exhale a breathing gas. It is usually expressed as work per unit volume, for example, joules/litre, or as a work rate (power), such as joules/min or equivalent units, as it is not particularly useful without a reference to volume or time. It can be calculated in terms of the pulmonary pressure multiplied by the change in pulmonary volume, or in terms of the oxygen consumption attributable to breathing.

In a normal resting state the work of breathing constitutes about 5% of the total body oxygen consumption. It can increase considerably due to illness or constraints on gas flow imposed by breathing apparatus, ambient pressure, or breathing gas composition. (Full article...)

Turbidity is the cloudiness or haziness of a fluid caused by large numbers of individual particles that are generally invisible to the naked eye, similar to smoke in air. The measurement of turbidity is a key test of both water clarity and water quality.

Fluids can contain suspended solid matter consisting of particles of many different sizes. While some suspended material will be large enough and heavy enough to settle rapidly to the bottom of the container if a liquid sample is left to stand (the settable solids), very small particles will settle only very slowly or not at all if the sample is regularly agitated or the particles are colloidal. These small solid particles cause the liquid to appear turbid.

Turbidity (or haze) is also applied to transparent solids such as glass or plastic. In plastic production, haze is defined as the percentage of light that is deflected more than 2.5° from the incoming light direction. (Full article...)

In diving and decompression, the oxygen window is the difference between the partial pressure of oxygen (P_O2) in arterial blood and the P_O2 in body tissues. It is caused by metabolic consumption of oxygen. (Full article...)

Dead space is the volume of air that is inhaled that does not take part in the gas exchange, because it either remains in the conducting airways or reaches alveoli that are not perfused or poorly perfused. It means that not all the air in each breath is available for the exchange of oxygen and carbon dioxide. Mammals breathe in and out of their lungs, wasting that part of the inhalation which remains in the conducting airways where no gas exchange can occur. (Full article...)

Tides are the rise and fall of sea levels caused by the combined effects of the gravitational forces exerted by the Moon (and to a much lesser extent, the Sun) and are also caused by the Earth and Moon orbiting one another.

Tide tables can be used for any given locale to find the predicted times and amplitude (or "tidal range").
The predictions are influenced by many factors including the alignment of the Sun and Moon, the phase and amplitude of the tide (pattern of tides in the deep ocean), the amphidromic systems of the oceans, and the shape of the coastline and near-shore bathymetry (see Timing). They are however only predictions, the actual time and height of the tide is affected by wind and atmospheric pressure. Many shorelines experience semi-diurnal tides—two nearly equal high and low tides each day. Other locations have a diurnal tide—one high and low tide each day. A "mixed tide"—two uneven magnitude tides a day—is a third regular category.

Tides vary on timescales ranging from hours to years due to a number of factors, which determine the lunitidal interval. To make accurate records, tide gauges at fixed stations measure water level over time. Gauges ignore variations caused by waves with periods shorter than minutes. These data are compared to the reference (or datum) level usually called mean sea level.

While tides are usually the largest source of short-term sea-level fluctuations, sea levels are also subject to change from thermal expansion, wind, and barometric pressure changes, resulting in storm surges, especially in shallow seas and near coasts.

Tidal phenomena are not limited to the oceans, but can occur in other systems whenever a gravitational field that varies in time and space is present. For example, the shape of the solid part of the Earth is affected slightly by Earth tide, though this is not as easily seen as the water tidal movements. (Full article...)

Cold shock response is a series of neurogenic cardio-respiratory responses caused by sudden immersion in cold water.

In cold water immersions, such as by falling through thin ice, cold shock response is perhaps the most common cause of death. Also, the abrupt contact with very cold water may cause involuntary inhalation, which, if underwater, can result in fatal drowning.

Death which occurs in such scenarios is complex to investigate and there are several possible causes and phenomena that can take part. The cold water can cause heart attack due to severe vasoconstriction, where the heart has to work harder to pump the same volume of blood throughout the arteries. For people with pre-existing cardiovascular disease, the additional workload can result in myocardial infarction and/or acute heart failure, which ultimately may lead to a cardiac arrest. A vagal response to an extreme stimulus as this one, may, in very rare cases, render per se a cardiac arrest. Hypothermia and extreme stress can both precipitate fatal tachyarrhythmias. A more modern view suggests that an autonomic conflict — sympathetic (due to stress) and parasympathetic (due to the diving reflex) coactivation — may be responsible for some cold water immersion deaths. Gasp reflex and uncontrollable tachypnea can severely increase the risk of water inhalation and drowning.

Some people are much better prepared to survive sudden exposure to very cold water due to body and mental characteristics and due to conditioning. In fact, cold water swimming (also known as ice swimming or winter swimming) is a sport and an activity that reportedly can lead to several health benefits when done regularly. (Full article...)

The physiology of decompression is the aspect of physiology which is affected by exposure to large changes in ambient pressure. It involves a complex interaction of gas solubility, partial pressures and concentration gradients, diffusion, bulk transport and bubble mechanics in living tissues. Gas is breathed at ambient pressure, and some of this gas dissolves into the blood and other fluids. Inert gas continues to be taken up until the gas dissolved in the tissues is in a state of equilibrium with the gas in the lungs (see: "Saturation diving"), or the ambient pressure is reduced until the inert gases dissolved in the tissues are at a higher concentration than the equilibrium state, and start diffusing out again.

The absorption of gases in liquids depends on the solubility of the specific gas in the specific liquid, the concentration of gas (customarily expressed as partial pressure) and temperature. In the study of decompression theory, the behaviour of gases dissolved in the body tissues is investigated and modeled for variations of pressure over time. Once dissolved, distribution of the dissolved gas is by perfusion, where the solvent (blood) is circulated around the diver's body, and by diffusion, where dissolved gas can spread to local regions of lower concentration when there is no bulk flow of the solvent. Given sufficient time at a specific partial pressure in the breathing gas, the concentration in the tissues will stabilise, or saturate, at a rate depending on the local solubility, diffusion rate and perfusion. If the concentration of the inert gas in the breathing gas is reduced below that of any of the tissues, there will be a tendency for gas to return from the tissues to the breathing gas. This is known as outgassing, and occurs during decompression, when the reduction in ambient pressure or a change of breathing gas reduces the partial pressure of the inert gas in the lungs.

The combined concentrations of gases in any given tissue will depend on the history of pressure and gas composition. Under equilibrium conditions, the total concentration of dissolved gases will be less than the ambient pressure, as oxygen is metabolised in the tissues, and the carbon dioxide produced is much more soluble. However, during a reduction in ambient pressure, the rate of pressure reduction may exceed the rate at which gas can be eliminated by diffusion and perfusion, and if the concentration gets too high, it may reach a stage where bubble formation can occur in the supersaturated tissues. When the pressure of gases in a bubble exceed the combined external pressures of ambient pressure and the surface tension from the bubble - liquid interface, the bubbles will grow, and this growth can cause damage to tissues. Symptoms caused by this damage are known as decompression sickness.

The actual rates of diffusion and perfusion, and the solubility of gases in specific tissues are not generally known, and vary considerably. However mathematical models have been proposed which approximate the real situation to a greater or lesser extent, and these decompression models are used to predict whether symptomatic bubble formation is likely to occur for a given pressure exposure profile. Efficient decompression requires the diver to ascend fast enough to establish as high a decompression gradient, in as many tissues, as safely possible, without provoking the development of symptomatic bubbles. This is facilitated by the highest acceptably safe oxygen partial pressure in the breathing gas, and avoiding gas changes that could cause counterdiffusion bubble formation or growth. The development of schedules that are both safe and efficient has been complicated by the large number of variables and uncertainties, including personal variation in response under varying environmental conditions and workload. (Full article...)

Upwelling is an oceanographic phenomenon that involves wind-driven motion of dense, cooler, and usually nutrient-rich water from deep water towards the ocean surface. It replaces the warmer and usually nutrient-depleted surface water. The nutrient-rich upwelled water stimulates the growth and reproduction of primary producers such as phytoplankton. The biomass of phytoplankton and the presence of cool water in those regions allow upwelling zones to be identified by cool sea surface temperatures (SST) and high concentrations of chlorophyll a.

The increased availability of nutrients in upwelling regions results in high levels of primary production and thus fishery production. Approximately 25% of the total global marine fish catches come from five upwellings, which occupy only 5% of the total ocean area. Upwellings that are driven by coastal currents or diverging open ocean have the greatest impact on nutrient-enriched waters and global fishery yields. (Full article...)

Decompression theory is the study and modelling of the transfer of the inert gas component of breathing gases from the gas in the lungs to the tissues and back during exposure to variations in ambient pressure. In the case of underwater diving and compressed air work, this mostly involves ambient pressures greater than the local surface pressure, but astronauts, high altitude mountaineers, and travellers in aircraft which are not pressurised to sea level pressure, are generally exposed to ambient pressures less than standard sea level atmospheric pressure. In all cases, the symptoms caused by decompression occur during or within a relatively short period of hours, or occasionally days, after a significant pressure reduction.

The term "decompression" derives from the reduction in ambient pressure experienced by the organism and refers to both the reduction in pressure and the process of allowing dissolved inert gases to be eliminated from the tissues during and after this reduction in pressure. The uptake of gas by the tissues is in the dissolved state, and elimination also requires the gas to be dissolved, however a sufficient reduction in ambient pressure may cause bubble formation in the tissues, which can lead to tissue damage and the symptoms known as decompression sickness, and also delays the elimination of the gas.

Decompression modeling attempts to explain and predict the mechanism of gas elimination and bubble formation within the organism during and after changes in ambient pressure, and provides mathematical models which attempt to predict acceptably low risk and reasonably practicable procedures for decompression in the field. Both deterministic and probabilistic models have been used, and are still in use.

Efficient decompression requires the diver to ascend fast enough to establish as high a decompression gradient, in as many tissues, as safely possible, without provoking the development of symptomatic bubbles. This is facilitated by the highest acceptably safe oxygen partial pressure in the breathing gas, and avoiding gas changes that could cause counterdiffusion bubble formation or growth. The development of schedules that are both safe and efficient has been complicated by the large number of variables and uncertainties, including personal variation in response under varying environmental conditions and workload. (Full article...)

Underwater vision is the ability to see objects underwater, and this is significantly affected by several factors. Underwater, objects are less visible because of lower levels of natural illumination caused by rapid attenuation of light with distance passed through the water. They are also blurred by scattering of light between the object and the viewer, also resulting in lower contrast. These effects vary with wavelength of the light, and color and turbidity of the water. The vertebrate eye is usually either optimised for underwater vision or air vision, as is the case in the human eye. The visual acuity of the air-optimised eye is severely adversely affected by the difference in refractive index between air and water when immersed in direct contact. Provision of an airspace between the cornea and the water can compensate, but has the side effect of scale and distance distortion. The diver learns to compensate for these distortions. Artificial illumination is effective to improve illumination at short range.

Stereoscopic acuity, the ability to judge relative distances of different objects, is considerably reduced underwater, and this is affected by the field of vision. A narrow field of vision caused by a small viewport in a helmet results in greatly reduced stereoacuity, and associated loss of hand-eye coordination. At very short range in clear water distance is underestimated, in accordance with magnification due to refraction through the flat lens of the mask, but at greater distances - greater than arm's reach, the distance tends to be overestimated to a degree influenced by turbidity. Both relative and absolute depth perception are reduced underwater. Loss of contrast results in overestimation, and magnification effects account for underestimation at short range. Divers can to a large extent adapt to these effects over time and with practice.

Light rays bend when they travel from one medium to another; the amount of bending is determined by the refractive indices of the two media. If one medium has a particular curved shape, it functions as a lens. The cornea, humours, and crystalline lens of the eye together form a lens that focuses images on the retina. The eye of most land animals is adapted for viewing in air. Water, however, has approximately the same refractive index as the cornea (both about 1.33), effectively eliminating the cornea's focusing properties. When immersed in water, instead of focusing images on the retina, they are focused behind the retina, resulting in an extremely blurred image from hypermetropia. This is largely avoided by having an air space between the water and the cornea, trapped inside the mask or helmet.

Water attenuates light due to absorption and as light passes through water colour is selectively absorbed by the water. Color absorption is also affected by turbidity of the water and dissolved material. Water preferentially absorbs red light, and to a lesser extent, yellow, green and violet light, so the color that is least absorbed by water is blue light. Particulates and dissolved materials may absorb different frequencies, and this will affect the color at depth, with results such as the typically green color in many coastal waters, and the dark red-brown color of many freshwater rivers and lakes due to dissolved organic matter.

Visibility is a term which generally predicts the ability of some human, animal, or instrument to optically detect an object in the given environment, and may be expressed as a measure of the distance at which an object or light can be discerned. Factors affecting visibility include illumination, length of the light path, particles which cause scattering, dissolved pigments which absorb specific colours, and salinity and temperature gradients which affect refractive index. Visibility can be measured in any arbitrary direction, and for various colour targets, but horizontal visibility of a black target reduces the variables and meets the requirements for a straight-forward and robust parameter for underwater visibility. Instruments are available for field estimates of visibility from the surface, which can inform the dive team on probable complications. (Full article...)

The physiology of underwater diving is the physiological adaptations to diving of air-breathing vertebrates that have returned to the ocean from terrestrial lineages. They are a diverse group that include sea snakes, sea turtles, the marine iguana, saltwater crocodiles, penguins, pinnipeds, cetaceans, sea otters, manatees and dugongs. All known diving vertebrates dive to feed, and the extent of the diving in terms of depth and duration are influenced by feeding strategies, but also, in some cases, with predator avoidance. Diving behaviour is inextricably linked with the physiological adaptations for diving and often the behaviour leads to an investigation of the physiology that makes the behaviour possible, so they are considered together where possible. Most diving vertebrates make relatively short shallow dives. Sea snakes, crocodiles, and marine iguanas only dive in inshore waters and seldom dive deeper than 10 meters (33 feet). Some of these groups can make much deeper and longer dives. Emperor penguins regularly dive to depths of 400 to 500 meters (1,300 to 1,600 feet) for 4 to 5 minutes, often dive for 8 to 12 minutes, and have a maximum endurance of about 22 minutes. Elephant seals stay at sea for between 2 and 8 months and dive continuously, spending 90% of their time underwater and averaging 20 minutes per dive with less than 3 minutes at the surface between dives. Their maximum dive duration is about 2 hours and they routinely feed at depths between 300 and 600 meters (980 and 1,970 feet), though they can exceed depths of 1,600 meters (5,200 feet). Beaked whales have been found to routinely dive to forage at depths between 835 and 1,070 meters (2,740 and 3,510 feet), and remain submerged for about 50 minutes. Their maximum recorded depth is 1,888 meters (6,194 feet), and the maximum duration is 85 minutes.

Air-breathing marine vertebrates that dive to feed must deal with the effects of pressure at depth, hypoxia during apnea, and the need to find and capture their food. Adaptations to diving can be associated with these three requirements. Adaptations to pressure must deal with the mechanical effects of pressure on gas-filled cavities, solubility changes of gases under pressure, and possible direct effects of pressure on the metabolism, while adaptations to breath-hold capacity include modifications to metabolism, perfusion, carbon dioxide tolerance, and oxygen storage capacity. Adaptations to find and capture food vary depending on the food, but deep-diving generally involves operating in a dark environment.

Diving vertebrates have increased the amount of oxygen stored in their internal tissues. This oxygen store has three components; oxygen contained in the air in the lungs, oxygen stored by haemoglobin in the blood, and by myoglobin, in muscle tissue, The muscle and blood of diving vertebrates have greater concentrations of haemoglobin and myoglobin than terrestrial animals. Myoglobin concentration in locomotor muscles of diving vertebrates is up to 30 times more than in terrestrial relatives. Haemoglobin is increased by both a relatively larger amount of blood and a larger proportion of red blood cells in the blood compared with terrestrial animals. The highest values are found in the mammals which dive deepest and longest.

Body size is a factor in diving ability. A larger body mass correlates to a relatively lower metabolic rate, while oxygen storage is directly proportional to body mass, so larger animals should be able to dive for longer, all other things being equal. Swimming efficiency also affects diving ability, as low drag and high propulsive efficiency requires less energy for the same dive. Burst and glide locomotion is also often used to minimise energy consumption, and may involve using positive or negative buoyancy to power part of the ascent or descent.

The responses seen in seals diving freely at sea are physiologically the same as those seen during forced dives in the laboratory. They are not specific to immersion in water, but are protective mechanisms against asphyxia which are common to all mammals but more effective and developed in seals. The extent to which these responses are expressed depends greatly on the seal's anticipation of dive duration.
The regulation of bradycardia and vasoconstriction of the dive response in both mammals and diving ducks can be triggered by facial immersion, wetting of the nostrils and glottis, or stimulation of trigeminal and glossopharyngeal nerves.
Animals cannot convert fats to glucose, and in many diving animals, carbohydrates are not readily available from the diet, nor stored in large quantities, so as they are essential for anaerobic metabolism, they could be a limiting factor.

Decompression sickness (DCS) is a disease associated with metabolically inert gas uptake at pressure, and its subsequent release into the tissues in the form of bubbles. Marine mammals were thought to be relatively immune to DCS due to anatomical, physiological and behavioural adaptations that reduce tissue loading with dissolved nitrogen during dives, but observations show that gas bubbles may form, and tissue injury may occur under certain circumstances. Decompression modelelling using measured dive profiles predict the possibility of high blood and tissue nitrogen tensions. (Full article...)

In a mixture of gases, each constituent gas has a partial pressure which is the notional pressure of that constituent gas as if it alone occupied the entire volume of the original mixture at the same temperature. The total pressure of an ideal gas mixture is the sum of the partial pressures of the gases in the mixture (Dalton's Law).

The partial pressure of a gas is a measure of thermodynamic activity of the gas's molecules. Gases dissolve, diffuse, and react according to their partial pressures but not according to their concentrations in gas mixtures or liquids. This general property of gases is also true in chemical reactions of gases in biology. For example, the necessary amount of oxygen for human respiration, and the amount that is toxic, is set by the partial pressure of oxygen alone. This is true across a very wide range of different concentrations of oxygen present in various inhaled breathing gases or dissolved in blood; consequently, mixture ratios, like that of breathable 20% oxygen and 80% Nitrogen, are determined by volume instead of by weight or mass. Furthermore, the partial pressures of oxygen and carbon dioxide are important parameters in tests of arterial blood gases. That said, these pressures can also be measured in, for example, cerebrospinal fluid. (Full article...)

In physical chemistry, supersaturation occurs with a solution when the concentration of a solute exceeds the concentration specified by the value of solubility at equilibrium. Most commonly the term is applied to a solution of a solid in a liquid, but it can also be applied to liquids and gases dissolved in a liquid. A supersaturated solution is in a metastable state; it may return to equilibrium by separation of the excess of solute from the solution, by dilution of the solution by adding solvent, or by increasing the solubility of the solute in the solvent. (Full article...)

A rip current (or just rip) is a specific type of water current that can occur near beaches where waves break. A rip is a strong, localized, and narrow current of water that moves directly away from the shore by cutting through the lines of breaking waves, like a river flowing out to sea. The force of the current in a rip is strongest and fastest next to the surface of the water.

Rip currents can be hazardous to people in the water. Swimmers who are caught in a rip current and who do not understand what is happening, or who may not have the necessary water skills, may panic, or they may exhaust themselves by trying to swim directly against the flow of water. Because of these factors, rip currents are the leading cause of rescues by lifeguards at beaches. In the United States they cause an average of 71 deaths by drowning per year as of 2022^[update].

A rip current is not the same thing as undertow, although some people use that term incorrectly when they are talking about a rip current. Contrary to popular belief, neither rip nor undertow can pull a person down and hold them under the water. A rip simply carries floating objects, including people, out to just beyond the zone of the breaking waves, at which point the current dissipates and releases everything it is carrying. (Full article...)

Pearl hunting, also known as pearl fishing or pearling, is the activity of recovering or attempting to recover pearls from wild molluscs, usually oysters or mussels, in the sea or freshwater. Pearl hunting was prevalent in the Persian Gulf region and Japan for thousands of years. On the northern and north-western coast of Western Australia pearl diving began in the 1850s, and started in the Torres Strait Islands in the 1860s, where the term also covers diving for nacre or mother of pearl found in what were known as pearl shells.

In most cases the pearl-bearing molluscs live at depths where they are not manually accessible from the surface, and diving or the use of some form of tool is needed to reach them. Historically the molluscs were retrieved by freediving, a technique where the diver descends to the bottom, collects what they can, and surfaces on a single breath. The diving mask improved the ability of the diver to see while underwater. When the surface-supplied diving helmet became available for underwater work, it was also applied to the task of pearl hunting, and the associated activity of collecting pearl shell as a raw material for the manufacture of buttons, inlays and other decorative work. The surface supplied diving helmet greatly extended the time the diver could stay at depth, and introduced the previously unfamiliar hazards of barotrauma of ascent and decompression sickness. (Full article...)

A divemaster (DM) is a role that includes organising and leading recreational dives, particularly in a professional capacity, and is a qualification used in many parts of the world in recreational scuba diving for a diver who has supervisory responsibility for a group of divers and as a dive guide. As well as being a generic term, 'Divemaster' is the title of the first professional rating of many training agencies, such as PADI, SSI, SDI, NASE, except NAUI, which rates a NAUI Divemaster under a NAUI Instructor but above a NAUI Assistant Instructor. The divemaster certification is generally equivalent to the requirements of ISO 24801-3 Dive Leader.

The BSAC recognizes several agencies' divemaster certificates as equivalent to BSAC Dive Leader, but not to BSAC Advanced Diver. The converse may not be true.

The certification is a prerequisite for training as an instructor in recreational diving with the professional agencies except NAUI, where it is an optional step, because of the different position of the NAUI Divemaster in the NAUI hierarchy. (Full article...)

Hazmat diving is underwater diving in a known hazardous materials environment. The environment may be contaminated by hazardous materials, the diving medium may be inherently a hazardous material, or the environment in which the diving medium is situated may include hazardous materials with a significant risk of exposure to these materials to members of the diving team. Special precautions, equipment and procedures are associated with hazmat diving so that the risk can be reduced to an acceptable level. These are based on preventing contact of the hazardous materials with the divers and other personnel, generally by encapsulating the affected personnel in personal protective equipment (PPE) appropriate to the hazard, and by effective decontamination after contact between the PPE and the hazardous materials.

There are a few well known environments, like nuclear power plant cooling systems, sewage treatment plants and sewers which require routine maintenance by divers, and which are well documented, with well-known and consistent hazards, for which standard operating procedures will have been developed, and other environments where the need for diving work is unusual and the hazards less well documented, and must be managed on a case-by-case basis, following an approved code of practice. Hazmat diving is a particular class of diving in high risk environments, normally only done by specially trained professional divers. (Full article...)

A frogman is someone who is trained in scuba diving or swimming underwater in a tactical capacity that includes military, and in some European countries, police work. Such personnel are also known by the more formal names of combat diver, combatant diver, or combat swimmer. The word frogman first arose in the stage name the "Fearless Frogman" of Paul Boyton in the 1870s and later was claimed by John Spence, an enlisted member of the U.S. Navy and member of the OSS Maritime Unit, to have been applied to him while he was training in a green waterproof suit.

The term frogman is occasionally used to refer to a civilian scuba diver, such as in a police diving role.

In the United Kingdom, police divers have often been called "police frogmen".

Some countries' tactical diver organizations include a translation of the word frogman in their official names, e.g., Denmark's Frømandskorpset; others call themselves "combat divers" or similar. (Full article...)

Commercial offshore diving, sometimes shortened to just offshore diving, generally refers to the branch of commercial diving, with divers working in support of the exploration and production sector of the oil and gas industry in places such as the Gulf of Mexico in the United States, the North Sea in the United Kingdom and Norway, and along the coast of Brazil. The work in this area of the industry includes maintenance of oil platforms and the building of underwater structures. In this context "offshore" implies that the diving work is done outside of national boundaries. Technically it also refers to any diving done in the international offshore waters outside of the territorial waters of a state, where national legislation does not apply. Most commercial offshore diving is in the Exclusive Economic Zone of a state, and much of it is outside the territorial waters. Offshore diving beyond the EEZ does also occur, and is often for scientific purposes.

Equipment used for commercial offshore diving tends to be surface supplied equipment but this varies according to the work and location. For instance, divers in the Gulf of Mexico may use wetsuits whilst North Sea divers need dry suits or even hot water suits because of the low temperature of the water.

Diving work in support of the offshore oil and gas industries is usually contract based.

Saturation diving is standard practice for bottom work at many of the deeper offshore sites, and allows more effective use of the diver's time while reducing the risk of decompression sickness. Surface oriented air diving is more usual in shallower water. (Full article...)

Underwater search and recovery is the process of locating and recovering underwater objects, often by divers, but also by the use of submersibles, remotely operated vehicles and electronic equipment on surface vessels.

Most underwater search and recovery is done by professional divers as part of commercial marine salvage operations, military operations, emergency services, or law enforcement activities.

Minor aspects of search and recovery are also considered within the scope of recreational diving. (Full article...)

Recreational diver training is the process of developing knowledge and understanding of the basic principles, and the skills and procedures for the use of scuba equipment so that the diver is able to dive for recreational purposes with acceptable risk using the type of equipment and in similar conditions to those experienced during training.

Not only is the underwater environment hazardous but the diving equipment itself can be dangerous. There are problems that divers must learn to avoid and manage when they do occur. Divers need repeated practice and a gradual increase in challenge to develop and internalise the skills needed to control the equipment, to respond effective if they encounter difficulties, and to build confidence in their equipment and themselves. Diver practical training starts with simple but essential procedures, and builds on them until complex procedures can be managed effectively. This may be broken up into several short training programmes, with certification issued for each stage, or combined into a few more substantial programmes with certification issued when all the skills have been mastered.

Many diver training organizations exist, throughout the world, offering diver training leading to certification: the issuing of a "diving certification card," also known as a "C-card," or qualification card. This diving certification model originated at Scripps Institution of Oceanography in 1952 after two divers died while using university-owned equipment and the SIO instituted a system where a card was issued after training as evidence of competence. Diving instructors affiliated to a diving certification agency may work independently or through a university, a dive club, a dive school or a dive shop. They will offer courses that should meet, or exceed, the standards of the certification organization that will certify the divers attending the course. The International Organization for Standardization has approved six recreational diving standards that may be implemented worldwide, and some of the standards developed by the (United States) RSTC are consistent with the applicable ISO Standards:

The initial open water training for a person who is medically fit to dive and a reasonably competent swimmer is relatively short. Many dive shops in popular holiday locations offer courses intended to teach a novice to dive in a few days, which can be combined with diving on the vacation. Other instructors and dive schools will provide more thorough training, which generally takes longer. Dive operators, dive shops, and cylinder filling stations may refuse to allow uncertified people to dive with them, hire diving equipment or have their diving cylinders filled. This may be an agency standard, company policy, or specified by legislation. (Full article...)

Police diving is a branch of professional diving carried out by police services. Police divers are usually professional police officers, and may either be employed full-time as divers or as general water police officers, or be volunteers who usually serve in other units but are called in if their diving services are required.

The duties carried out by police divers include rescue diving for underwater casualties, under the general classification of public safety diving, and forensic diving, which is search and recovery diving for evidence and bodies. (Full article...)

Underwater photography is the process of taking photographs while under water. It is usually done while scuba diving, but can be done while diving on surface supply, snorkeling, swimming, from a submersible or remotely operated underwater vehicle, or from automated cameras lowered from the surface.

Underwater photography can also be categorised as an art form and a method for recording data.
Successful underwater imaging is usually done with specialized equipment and techniques. However, it offers exciting and rare photographic opportunities. Animals such as fish and marine mammals are common subjects, but photographers also pursue shipwrecks, submerged cave systems, underwater "landscapes", invertebrates, seaweeds, geological features, and portraits of fellow divers. (Full article...)

A clearance diver was originally a specialist naval diver who used explosives underwater to remove obstructions to make harbours and shipping channels safe to navigate, but the term "clearance diver" was later used to include other naval underwater work. Units of clearance divers were first formed during and after World War II to clear ports and harbours in the Mediterranean and Northern Europe of unexploded ordnance and shipwrecks and booby traps laid by the Germans. (Full article...)

A Diving certification or C-card is a document (usually a wallet sized plastic card) recognizing that an individual or organization authorized to do so, "certifies" that the bearer has completed a course of training as required by the agency issuing the card. This is assumed to represent a defined level of skill and knowledge in underwater diving. Divers carry a qualification record or certification card which may be required to prove their qualifications when booking a dive trip, hiring scuba equipment, having diving cylinders filled, or in the case of professional divers, seeking employment.

Although recreational certifications are issued by numerous different diver training agencies, the entry-level grade is not always equivalent. Different agencies will have different entry-level requirements as well as different higher-level grades, but all are claimed to allow a diver to develop their skills and knowledge in achievable steps.

In contradistinction, a diver's logbook, or the electronic equivalent, is primarily evidence of range of diving experience. (Full article...)

Hyperbaric welding is the process of extreme welding at elevated pressures, normally underwater. Hyperbaric welding can either take place wet in the water itself or dry inside a specially constructed positive pressure enclosure and hence a dry environment. It is predominantly referred to as "hyperbaric welding" when used in a dry environment, and "underwater welding" when in a wet environment. The applications of hyperbaric welding are diverse—it is often used to repair ships, offshore oil platforms, and pipelines. Steel is the most common material welded.

Dry welding is used in preference to wet underwater welding when high quality welds are required because of the increased control over conditions which can be maintained, such as through application of prior and post weld heat treatments. This improved environmental control leads directly to improved process performance and a generally much higher quality weld than a comparative wet weld. Thus, when a very high quality weld is required, dry hyperbaric welding is normally utilized. Research into using dry hyperbaric welding at depths of up to 1,000 metres (3,300 ft) is ongoing. In general, assuring the integrity of underwater welds can be difficult (but is possible using various nondestructive testing applications), especially for wet underwater welds, because defects are difficult to detect if the defects are beneath the surface of the weld.

Underwater hyperbaric welding was invented by the Soviet metallurgist Konstantin Khrenov in 1932. (Full article...)

Sponge diving is underwater diving to collect soft natural sponges for human use. (Full article...)

Underwater demolition is the deliberate destruction or neutralization of man-made or natural underwater obstacles, both for military and civilian purposes. (Full article...)

A diving instructor is a person who trains, and usually also assesses competence, of underwater divers. This includes freedivers, recreational divers including the subcategory technical divers, and professional divers which includes military, commercial, public safety and scientific divers.

Depending on the jurisdiction, there will generally be specific published codes of practice and guidelines for training, competence and registration of diving instructors, as they have a duty of care to their clients, and operate in an environment with intrinsic hazards which may be unfamiliar to the lay person. Training and assessment will generally follow a diver training standard, and may use a diver training manual as source material.

Recreational diving instructors are usually registered members of one or more recreational diver certification agencies, and are generally registered to train and assess divers against specified certification standards. Originally these standards were at the discretion of each training and certification agency, but inter-agency and international standards now exist to ensure that the basic skills required for acceptable safety are included as a minimum standard for both instructors and recreational divers. Military diving instructors are generally members of the armed force for which they train personnel. Commercial diving instructors may be required to register with national government appointed organisations, and comply with specific training and assessment standards, but there may be other requirements in some parts of the world. (Full article...)

Underwater ice hockey (also called sub-aqua ice hockey) is a minor extreme sport that is a variant of ice hockey. It is played upside-down underneath frozen pools or ponds. Participants wear diving masks, fins, and wetsuits and use the underside of the frozen surface as the playing area or rink for a floating puck. Competitors do not use any breathing apparatus but instead surface for air every 30 seconds or so.

It is not to be confused with underwater hockey, in which the floor of a swimming pool and a sinking puck are used. (Full article...)

Skandalopetra diving (Greek: σκανταλόπετρα) dates from ancient Greece, when it was used by sponge fishermen, and has been re-discovered in recent years as a freediving discipline. It was in this discipline that the first world record in freediving was registered, when the Greek sponge fisherman Stathis Chantzis dived to a depth of 83 m (272 ft) in July 1913. It consists of a variable ballast dive using a skandalopetra tied to a rope. A companion on a boat recovers the diver by pulling the rope up after the descent, and keeps a watch on the diver from the surface. (Full article...)

Underwater sports is a group of competitive sports using one or a combination of the following underwater diving techniques - breath-hold, snorkelling or scuba, usually including the use of equipment such as diving masks and fins. These sports are conducted in the natural environment at sites such as open water and sheltered or confined water such as lakes and in artificial aquatic environments such as swimming pools. Underwater sports include the following - aquathlon (i.e. underwater wrestling), finswimming, freediving, spearfishing, sport diving, underwater football, underwater hockey, underwater ice hockey, underwater orienteering, underwater photography, underwater rugby, underwater target shooting and underwater video. (Full article...)

Sport diving is an underwater sport that uses recreational open circuit scuba diving equipment and consists of a set of individual and team events conducted in a swimming pool that test the competitors' competency in recreational scuba diving techniques. The sport was developed in Spain during the late 1990s and is currently played mainly in Europe. It is known as Plongée Sportive en Piscine in French and as Buceo De Competición in Spanish. (Full article...)

Doing It Right (DIR) is a holistic approach to scuba diving that encompasses several essential elements, including fundamental diving skills, teamwork, physical fitness, and streamlined and minimalistic equipment configurations. DIR proponents maintain that through these elements, safety is improved by standardizing equipment configuration and dive-team procedures for preventing and dealing with emergencies.

DIR evolved out of the efforts of divers involved in the Woodville Karst Plain Project (WKPP) during the 1990s, who were seeking ways of reducing the fatality rate in those cave systems. The DIR philosophy is now used as a basis for teaching scuba diving from entry-level to technical and cave qualifications by several organizations, such as Global Underwater Explorers (GUE), Unified Team Diving (UTD) and InnerSpace Explorers (ISE). (Full article...)

Recreational diving or sport diving is diving for the purpose of leisure and enjoyment, usually when using scuba equipment. The term "recreational diving" may also be used in contradistinction to "technical diving", a more demanding aspect of recreational diving which requires more training and experience to develop the competence to reliably manage more complex equipment in the more hazardous conditions associated with the disciplines. Breath-hold diving for recreation also fits into the broader scope of the term, but this article covers the commonly used meaning of scuba diving for recreational purposes, where the diver is not constrained from making a direct near-vertical ascent to the surface at any point during the dive, and risk is considered low.

The equipment used for recreational diving is mostly open circuit scuba, though semi closed and fully automated electronic closed circuit rebreathers may be included in the scope of recreational diving. Risk is managed by training the diver in a range of standardised procedures and skills appropriate to the equipment the diver chooses to use and the environment in which the diver plans to dive. Further experience and development of skills by practice will improve the diver's ability to dive safely. Specialty training is made available by the recreational diver training industry and diving clubs to increase the range of environments and venues the diver can enjoy at an acceptable level of risk.

Reasons to dive and preferred diving activities may vary during the personal development of a recreational diver, and may depend on their psychological profile and their level of dedication to the activity. Most divers average less than eight dives per year, but some total several thousand dives over a few decades and continue diving into their 60s and 70s, occasionally older. Recreational divers may frequent local dive sites or dive as tourists at more distant venues known for desirable underwater environments. An economically significant diving tourism industry services recreational divers, providing equipment, training and diving experiences, generally by specialist providers known as dive centers, dive schools, live-aboard, day charter and basic dive boats.

Legal constraints on recreational diving vary considerably across jurisdictions. Recreational diving may be industry regulated or regulated by law to some extent. The legal responsibility for recreational diving service providers is usually limited as far as possible by waivers which they require the customer to sign before engaging in any diving activity. The extent of responsibility of recreational buddy divers is unclear, but buddy diving is generally recommended by recreational diver training agencies as safer than solo diving, and some service providers insist that customers dive in buddy pairs. The evidence supporting this policy is inconclusive. (Full article...)

Technical diving (also referred to as tec diving or tech diving) is scuba diving that exceeds the agency-specified limits of recreational diving for non-professional purposes. Technical diving may expose the diver to hazards beyond those normally associated with recreational diving, and to a greater risk of serious injury or death. Risk may be reduced via appropriate skills, knowledge, and experience. Risk can also be managed by using suitable equipment and procedures. The skills may be developed through specialized training and experience. The equipment involves breathing gases other than air or standard nitrox mixtures, and multiple gas sources.

The popularisation of the term technical diving has been credited to Michael Menduno, who was editor of the (now defunct) diving magazine aquaCorps Journal, but the concept and term, technical diving, go back at least as far as 1977, and divers have been engaging in what is now commonly referred to as technical diving for decades. (Full article...)

Below is the list of current European finswimming records. The records are ratified by the CMAS Confédération Mondiale des Activités Subaquatiques (World Underwater Federation). (Full article...)

Underwater photography is the process of taking photographs while under water. It is usually done while scuba diving, but can be done while diving on surface supply, snorkeling, swimming, from a submersible or remotely operated underwater vehicle, or from automated cameras lowered from the surface.

Underwater photography can also be categorised as an art form and a method for recording data.
Successful underwater imaging is usually done with specialized equipment and techniques. However, it offers exciting and rare photographic opportunities. Animals such as fish and marine mammals are common subjects, but photographers also pursue shipwrecks, submerged cave systems, underwater "landscapes", invertebrates, seaweeds, geological features, and portraits of fellow divers. (Full article...)

Below is the list of current Commonwealth Records for finswimming. The records are ratified by the Commonwealth Finswimming Committee, which is made up of the National Finswimming Governing Bodies of Commonwealth of Nations. The First Commonwealth Championships were held in Hobart, Tasmania, Australia in February 2007.

This page does not include the Commonwealth Finswimming Championship Records. This list echoes that found on the Swansea Finswimming Club Website and the British Finswimming Association documents website. These records are correct as of 4 December 2008.
Times set before the First Commonwealth Championships have been allowed. All records have been accepted as a result of documentary evidence of the events or time-trials that they were set at.

Currently there are only four nations hold records: Australia (10), England (8), New Zealand (7) and Singapore (5). Finswimming is currently competed in eight Commonwealth Countries (including home nations); Australia, Canada, Cyprus, England, New Zealand, Scotland, Singapore, South Africa and Wales (). (Full article...)

Below is the list of current British records in finswimming. The records are ratified by the British Finswimming Association.

This list echoes that found on the Monofin website. These records are correct as of 1 April 2018.

In December 2017 British Finswimming Association made a decision to maintain the National records separately for adults and juniors in line with CMAS regulations. (Full article...)

Below is the list of current United States of America Fin Swimming National Records. The records are ratified by the Underwater Society of America and USA Fin Swimming. (Full article...)

Wreck diving is recreational diving where the wreckage of ships, aircraft and other artificial structures are explored. The term is used mainly by recreational and technical divers. Professional divers, when diving on a shipwreck, generally refer to the specific task, such as salvage work, accident investigation or archaeological survey. Although most wreck dive sites are at shipwrecks, there is an increasing trend to scuttle retired ships to create artificial reef sites. Diving to crashed aircraft can also be considered wreck diving. The recreation of wreck diving makes no distinction as to how the vessel ended up on the bottom.

Some wreck diving involves penetration of the wreckage, making a direct ascent to the surface impossible for a part of the dive. (Full article...)

Underwater football is a two-team underwater sport that shares common elements with underwater hockey and underwater rugby. As with both of those games, it is played in a swimming pool with snorkeling equipment (mask, snorkel, and fins).

The goal of the game is to manoeuvre (by carrying and passing) a slightly negatively buoyant ball from one side of a pool to the other by players who are completely submerged underwater. Scoring is achieved by placing the ball (under control) in the gutter on the side of the pool. Variations include using a toy rubber torpedo as the ball, and weighing down buckets to rest on the bottom and serve as goals.

It is played in the Canadian provinces of Alberta, Manitoba, Newfoundland and Labrador and Saskatchewan. (Full article...)

Divers Alert Network (DAN) is a group of not-for-profit organisations dedicated to improving diving safety for all divers. It was founded in Durham, North Carolina, in 1980 at Duke University to provide 24/7 telephone diving medical assistance. Since then the organisation has expanded globally and now has independent regional organisations in North America, Europe, Japan, Asia-Pacific and Southern Africa.

DAN publishes research results on a wide range of matters relating to diving safety and medicine and diving accident analysis, including annual reports on decompression illness and diving fatalities. Most are freely available on the internet, many of these were at the now defunct Rubicon Research Repository.^{[needs update]}
This list includes publications where one or more authors are staff or members of one of the DAN affiliates, where a large part of the data is from one of the DAN Databases, or where the research was funded by DAN. (Full article...)

In engineering and systems theory, redundancy is the intentional duplication of critical components or functions of a system with the goal of increasing reliability of the system, usually in the form of a backup or fail-safe, or to improve actual system performance, such as in the case of GNSS receivers, or multi-threaded computer processing.

In many safety-critical systems, such as fly-by-wire and hydraulic systems in aircraft, some parts of the control system may be triplicated, which is formally termed triple modular redundancy (TMR). An error in one component may then be out-voted by the other two. In a triply redundant system, the system has three sub components, all three of which must fail before the system fails. Since each one rarely fails, and the sub components are designed to preclude common failure modes (which can then be modelled as independent failure), the probability of all three failing is calculated to be extraordinarily small; it is often outweighed by other risk factors, such as human error. Electrical surges arising from lightning strikes are an example of a failure mode which is difficult to fully isolate, unless the components are powered from independent power busses and have no direct electrical pathway in their interconnect (communication by some means is required for voting). Redundancy may also be known by the terms "majority voting systems" or "voting logic".

Redundancy sometimes produces less, instead of greater reliability – it creates a more complex system which is prone to various issues, it may lead to human neglect of duty, and may lead to higher production demands which by overstressing the system may make it less safe.

Redundancy is one form of robustness as practiced in computer science.

Geographic redundancy has become important in the data center industry, to safeguard data against natural disasters and political instability (see below). (Full article...)

Diving safety is the aspect of underwater diving operations and activities concerned with the safety of the participants. The safety of underwater diving depends on four factors: the environment, the equipment, behaviour of the individual diver and performance of the dive team. The underwater environment can impose severe physical and psychological stress on a diver, and is mostly beyond the diver's control. Equipment is used to operate underwater for anything beyond very short periods, and the reliable function of some of the equipment is critical to even short-term survival. Other equipment allows the diver to operate in relative comfort and efficiency, or to remain healthy over the longer term. The performance of the individual diver depends on learned skills, many of which are not intuitive, and the performance of the team depends on competence, communication, attention and common goals.

There is a large range of hazards to which the diver may be exposed. These each have associated consequences and risks, which should be taken into account during dive planning. Where risks are marginally acceptable it may be possible to mitigate the consequences by setting contingency and emergency plans in place, so that damage can be minimised where reasonably practicable. The acceptable level of risk varies depending on legislation, codes of practice, company policy, and personal choice, with recreational divers having a greater freedom of choice.

In professional diving there is a diving team to support the diving operation, and their primary function is to reduce and mitigate risk to the diver. The diving supervisor for the operation is legally responsible for the safety of the diving team. A diving contractor may have a diving superintendent or a diving safety officer tasked with ensuring the organisation has, and uses, a suitable operations manual to guide their practices. In recreational diving, the dive leader may be partly responsible for diver safety to the extent that the dive briefing is reasonably accurate and does not omit any known hazards that divers in the group can reasonably be expected to be unaware of, and not to lead the group into a known area of unacceptable risk. A certified recreational diver is generally responsible for their own safety, and to a lesser, variable, and poorly defined extent, for the safety of their dive buddy. (Full article...)

Divers face specific physical and health risks when they go underwater with scuba or other diving equipment, or use high pressure breathing gas. Some of these factors also affect people who work in raised pressure environments out of water, for example in caissons. This article lists hazards that a diver may be exposed to during a dive, and possible consequences of these hazards, with some details of the proximate causes of the listed consequences. A listing is also given of precautions that may be taken to reduce vulnerability, either by reducing the risk or mitigating the consequences. A hazard that is understood and acknowledged may present a lower risk if appropriate precautions are taken, and the consequences may be less severe if mitigation procedures are planned and in place.

A hazard is any agent or situation that poses a level of threat to life, health, property, or environment. Most hazards remain dormant or potential, with only a theoretical risk of harm, and when a hazard becomes active, and produces undesirable consequences, it is called an incident and may culminate in an emergency or accident. Hazard and vulnerability interact with likelihood of occurrence to create risk, which can be the probability of a specific undesirable consequence of a specific hazard, or the combined probability of undesirable consequences of all the hazards of a specific activity. The presence of a combination of several hazards simultaneously is common in diving, and the effect is generally increased risk to the diver, particularly where the occurrence of an incident due to one hazard triggers other hazards with a resulting cascade of incidents. Many diving fatalities are the result of a cascade of incidents overwhelming the diver, who should be able to manage any single reasonably foreseeable incident. The assessed risk of a dive would generally be considered unacceptable if the diver is not expected to cope with any single reasonably foreseeable incident with a significant probability of occurrence during that dive. Precisely where the line is drawn depends on circumstances. Commercial diving operations tend to be less tolerant of risk than recreational, particularly technical divers, who are less constrained by occupational health and safety legislation.

Decompression sickness and arterial gas embolism in recreational diving are associated with certain demographic, environmental, and dive style factors. A statistical study published in 2005 tested potential risk factors: age, gender, body mass index, smoking, asthma, diabetes, cardiovascular disease, previous decompression illness, years since certification, dives in last year, number of diving days, number of dives in a repetitive series, last dive depth, nitrox use, and drysuit use. No significant associations with decompression sickness or arterial gas embolism were found for asthma, diabetes, cardiovascular disease, smoking, or body mass index. Increased depth, previous DCI, days diving, and being male were associated with higher risk for decompression sickness and arterial gas embolism. Nitrox and drysuit use, greater frequency of diving in the past year, increasing age, and years since certification were associated with lower risk, possibly as indicators of more extensive training and experience.

Statistics show diving fatalities comparable to motor vehicle accidents of 16.4 per 100,000 divers and 16 per 100,000 drivers. Divers Alert Network 2014 data shows there are 3.174 million recreational scuba divers in America, of which 2.351 million dive 1 to 7 times per year and 823,000 dive 8 or more times per year. It is reasonable to say that the average would be in the neighbourhood of 5 dives per year. (Full article...)

A task load indicates the degree of difficulty experienced when performing a task, and task loading describes the accumulation of tasks that are necessary to perform an operation. A light task loading can be managed by the operator with capacity to spare in case of contingencies. Task loads are primarily associated with underwater diving. They are also associated with workloads in other environments, such as aircraft cockpits and command and control stations.

Task loads may be measured and compared. NASA uses six sub-scales in their task load rating procedure. Three of these relate to the demands on the subject and the other three to interactions between subject and task. Ratings contain a large personal component and may vary considerably between subjects, and over time as experience is gained.

1. Mental Demands: How much mental and perceptual effort is required;
2. Physical Demands: How much physical effort is required;
3. Temporal Demands: How much time pressure the subject feels;
4. Own Performance: Rating of how successfully the task was performed;
5. Effort: Rating of how much effort was put into the task; and
6. Frustration: Rating of how frustrating or satisfying the task was to perform.

In underwater diving, task loading increases the risk of failure by the diver to undertake some key basic function which would normally be routine for safety underwater. A heavy task loading may overwhelm the diver if something does not go according to plan. This is particularly a problem in scuba diving, where the breathing gas supply is limited and delays may cause decompression obligations. The same workload may be a light task loading to a skilled diver with considerable experience of all the component tasks, and heavy task loading for a diver with little experience of some of the tasks.

Excessive task loading is implicated in many diving accidents, and may be limited by adding tasks one at a time, and adequately developing the requisite skills for each before adding more. (Full article...)

Risk assessment determines possible mishaps, their likelihood and consequences, and the tolerances for such events. The results of this process may be expressed in a quantitative or qualitative fashion. Risk assessment is an inherent part of a broader risk management strategy to help reduce any potential risk-related consequences.
More precisely, risk assessment identifies and analyses potential (future) events that may negatively impact individuals, assets, and/or the environment (i.e. hazard analysis). It also makes judgments "on the tolerability of the risk on the basis of a risk analysis" while considering influencing factors (i.e. risk evaluation). (Full article...)

A job safety analysis (JSA) is a procedure that helps integrate accepted safety and health principles and practices into a particular task or job operation. The goal of a JSA is to identify potential hazards of a specific role and recommend procedures to control or prevent these hazards.

Other terms often used to describe this procedure are job hazard analysis (JHA), hazardous task analysis (HTA) and job hazard breakdown.

The terms "job" and "task" are commonly used interchangeably to mean a specific work assignment. Examples of work assignments include "operating a grinder," "using a pressurized water extinguisher" or "changing a flat tire." Each of these tasks have different safety hazards that can be highlighted and fixed by using the job safety analysis. (Full article...)

This list identifies the legislation governing underwater diving activities listed by region. Some legislation affects only professional diving, other may affect only recreational diving, or all diving activities. The list includes primary and delegated legislation, and international standards for the conduct of diving adopted by national states, but does not include legislation or standards relating to manufacture or testing of diving equipment. (Full article...)

Investigation of diving accidents includes investigations into the causes of reportable incidents in professional diving and recreational diving accidents, usually when there is a fatality or litigation for gross negligence.

An investigation of some kind usually follows a fatal diving accident, or one in which litigation is expected. There may be several investigations with different agendas. If police are involved, they generally look for evidence of a crime. In the U.S., the United States Coast Guard will usually investigate if there is a death when diving from a vessel in coastal waters. Health and safety administration officials may investigate when the diver was injured or killed at work. When a death occurs during an organised recreational activity, the certification agency's insurers will usually send an investigator to look into possible liability issues. The investigation may occur almost immediately to some considerable time after the event. In most cases the body will have been recovered and resuscitation attempted, and in this process equipment is usually removed and may be damaged or lost, or the evidence compromised by handling. Witnesses may have dispersed, and equipment is often mishandled by the investigating authorities if they are unfamiliar with the equipment and store it improperly, which can destroy evidence and compromise findings.

Recreational diving accidents are usually relatively uncomplicated, but accidents involving an extended range environment or specialised equipment may require expertise beyond the experience of any one investigator. This is a particular issue when rebreather equipment is involved. Investigators who are not familiar with complex equipment may not know enough about the equipment to understand that they do not know enough.

For every incident in which someone is injured of killed, it has been estimated that a relatively large number of "near miss" incidents occur, which the diver manages well enough to avoid harm. Ideally these will be recorded, analysed for cause, reported, and the results made public, so that similar incidents can be avoided in the future. (Full article...)

The diving supervisor is the professional diving team member who is directly responsible for the diving operation's safety and the management of any incidents or accidents that may occur during the operation; the supervisor is required to be available at the control point of the diving operation for the diving operation's duration, and to manage the planned dive and any contingencies that may occur. Details of competence, requirements, qualifications, registration and formal appointment differ depending on jurisdiction and relevant codes of practice. Diving supervisors are used in commercial diving, military diving, public safety diving and scientific diving operations.

The control point is the place where the supervisor can best monitor the status of the diver and progress of the dive. For scuba dives this is commonly on deck of the dive boat where there is a good view of the surface above the operational area, or on the shore at a nearby point where the divers can be seen when surfaced. For surface supplied diving, the view of the water is usually still necessary, and a view of the line tenders handling the umbilicals is also required, unless there is live video feed from the divers and two-way audio communications with the tenders. The control position also includes the gas panel and communications panel, so the supervisor can remain as fully informed as practicable of the status of the divers and their life support systems during the dive. For bell diving and saturation diving the situation is more complex and the control position may well be inside a compartment where the communications, control and monitoring equipment for the bell and life-support systems are set up.

In recreational diving the term is used to refer to persons managing a recreational dive, with certification such as Divemaster,
Dive Control Specialist, Dive Coordinator, etc. (Full article...)

In tort law, a duty of care is a legal obligation that is imposed on an individual, requiring adherence to a standard of reasonable care to avoid careless acts that could foreseeably harm others, and lead to claim in negligence. It is the first element that must be established to proceed with an action in negligence. The claimant must be able to show a duty of care imposed by law that the defendant has breached. In turn, breaching a duty may subject an individual to liability. The duty of care may be imposed by operation of law between individuals who have no current direct relationship (familial or contractual or otherwise) but eventually become related in some manner, as defined by common law (meaning case law).

Duty of care may be considered a formalisation of the social contract, the established and implicit responsibilities held by individuals/entities towards others within society. It is not a requirement that a duty of care be defined by law, though it will often develop through the jurisprudence of common law. (Full article...)

The civil liability of a recreational diver may include a duty of care to another diver during a dive. Breach of this duty that is a proximate cause of injury or loss to the other diver may lead to civil litigation for damages in compensation for the injury or loss suffered.

Participation in recreational diving implies acceptance of the inherent risks of the activity Diver training includes training in procedures known to reduce these risks to a level considered acceptable by the certification agency, and issue of certification implies that the agency accepts that the instructor has assessed the diver to be sufficiently competent in these skills at the time of assessment and to be competent to accept the associated risks. Certification relates to a set of skills and knowledge defined by the associated training standard, which also specifies the limitations on the scope of diving activities for which the diver is deemed competent. These limitations involve depth, environment and equipment that the diver has been trained to use. Intentionally diving significantly beyond the scope of certified competence is at the diver's risk, and may be construed as negligence if it puts another person at risk. Recommendations generally suggest that extending the scope should be done gradually, and preferably under the guidance of a diver experienced in similar conditions. The training agencies usually specify that any extension of scope should only be done by further training under a registered instructor, but this is not always practicable, or even possible, as there can always be circumstances that differ from those experienced during training.

Retention of skills requires exercise of those skills, and prolonged periods between dives will degrade skills by unpredictable amounts. This is recognised by training agencies which require instructors to keep in date, and recommend that divers take part in refresher courses after long periods of diving inactivity. (Full article...)

A silt out or silt-out is a situation when underwater visibility is rapidly reduced to functional zero by disturbing fine particulate deposits on the bottom or other solid surfaces. This can happen in scuba and surface supplied diving, or in ROV and submersible operations, and is a more serious hazard for scuba diving in penetration situations where the route to the surface may be obscured. (Full article...)

Diver rescue, usually following an accident, is the process of avoiding or limiting further exposure to diving hazards and bringing a diver to a place of safety. A safe place generally means a place where the diver cannot drown, such as a boat or dry land, where first aid can be administered and from which professional medical treatment can be sought. In the context of surface supplied diving, the place of safety for a diver with a decompression obligation is often the diving bell.

Rescue may be needed for various reasons where the diver becomes unable to manage an emergency, and there are several stages to a rescue, starting with recognising that a rescue is needed. In some cases the dive buddy identifies the need by personal observation, but in the more general case identification of the need is followed by locating the casualty. The most common and urgent diving emergencies involve loss of breathing gas, and the provision of emergency gas is the usual response. On other occasions the diver may be trapped and must be released by the rescuer. These first responses are usually followed by recovery of the distressed diver, who may be unconscious, to a place of safety with a secure supply of breathing gas, and following rescue, it may be necessary to evacuate the casualty to a place where further treatment is possible.

Recommended procedures for recovering a disabled or unresponsive scuba diver to the surface have varied over time, and to some extent depend on circumstances and the equipment in use. None are guaranteed to be successful.

In all rescue operations, the rescuer must take care of their own safety and avoid becoming another casualty. In professional diving the supervisor is responsible for initiating rescue procedures, and for ensuring the safety of the dive team. The rescue is generally carried out by the stand-by diver, and for this reason the stand-by diver must be willing and competent to perform any reasonably foreseeable rescue that may be required for a planned diving operation. A similar level of competence is desirable, but not required of recreational divers, who generally have a poorly defined duty of care to other divers, and are usually only trained in rescue and first aid as optional specialties. Nevertheless, recreational divers are usually advised by their training agencies to dive as buddy pairs so they can assist each other if one gets into difficulty. (Full article...)

Human factors are the physical or cognitive properties of individuals, or social behavior which is specific to humans, and which influence functioning of technological systems as well as human-environment equilibria. The safety of underwater diving operations can be improved by reducing the frequency of human error and the consequences when it does occur. Human error can be defined as an individual's deviation from acceptable or desirable practice which culminates in undesirable or unexpected results.
Human factors include both the non-technical skills that enhance safety and the non-technical factors that contribute to undesirable incidents that put the diver at risk.

[Safety is] An active, adaptive process which involves making sense of the task in the context of the environment to successfully achieve explicit and implied goals, with the expectation that no harm or damage will occur. – G. Lock, 2022

Dive safety is primarily a function of four factors: the environment, equipment, individual diver performance and dive team performance. The water is a harsh and alien environment which can impose severe physical and psychological stress on a diver. The remaining factors must be controlled and coordinated so the diver can overcome the stresses imposed by the underwater environment and work safely. Diving equipment is crucial because it provides life support to the diver, but the majority of dive accidents are caused by individual diver panic and an associated degradation of the individual diver's performance. – M.A. Blumenberg, 1996

Human error is inevitable and most errors are minor and do not cause significant harm, but others can have catastrophic consequences. Examples of human error leading to accidents are available in vast numbers, as it is the direct cause of 60% to 80% of all accidents.
In a high risk environment, as is the case in diving, human error is more likely to have catastrophic consequences. A study by William P. Morgan indicates that over half of all divers in the survey had experienced panic underwater at some time during their diving career. These findings were independently corroborated by a survey that suggested 65% of recreational divers have panicked under water. Panic frequently leads to errors in a diver's judgment or performance, and may result in an accident. Human error and panic are considered to be the leading causes of dive accidents and fatalities.

Only 4.46% of the recreational diving fatalities in a 1997 study were attributable to a single contributory cause. The remaining fatalities probably arose as a result of a progressive sequence of events involving two or more procedural errors or equipment failures, and since procedural errors are generally avoidable by a well-trained, intelligent and alert diver, working in an organised structure, and not under excessive stress, it was concluded that the low accident rate in professional scuba diving is due to these factors. The study also concluded that it would be impossible to eliminate absolutely all minor contraindications for scuba diving, as this would result in overwhelming bureaucracy and would bring all diving to a halt.

Human factors engineering (HFE), also known as human factors and ergonomics, is the application of psychological and physiological principles to the engineering and design of equipment, procedures, processes, and systems. Primary goals of human factors engineering are to reduce human error, increase productivity and system availability, and enhance safety, health and comfort with a specific focus on the interaction between the human and equipment. (Full article...)

Lock out, tag out or lockout–tagout (LOTO) is a safety procedure used to ensure that dangerous equipment is properly shut off and not able to be started up again prior to the completion of maintenance or repair work. It requires that hazardous energy sources be "isolated and rendered inoperative" before work is started on the equipment in question. The isolated power sources are then locked and a tag is placed on the lock identifying the worker and reason the LOTO is placed on it. The worker then holds the key for the lock, ensuring that only that worker can remove the lock and start the equipment. This prevents accidental startup of equipment while it is in a hazardous state or while a worker is in direct contact with it.

Lockout–tagout is used across industries as a safe method of working on hazardous equipment and is mandated by law in some countries. (Full article...)

Fitness to dive (more specifically medical fitness to dive) refers to the medical and physical suitability of a diver to function safely in an underwater environment using diving equipment and related procedures. Depending on the circumstances, it may be established with a signed statement by the diver that they do not have any of the listed disqualifying conditions. The diver must be able to fulfill the ordinary physical requirements of diving as per the detailed medical examination by a physician registered as a medical examiner of divers following a procedural checklist. A legal document of fitness to dive issued by the medical examiner is also necessary.

The most important medical is the one before starting diving, as the diver can be screened to prevent exposure in the event of an imminent danger. The other important medicals are after some significant illness, where medical intervention is needed and has to be done by a doctor proficient in diving medicine, and can not be done by prescriptive rules.

Psychological factors can affect fitness to dive, particularly where they affect response to emergencies, or risk-taking behavior. The use of medical and recreational drugs can also influence fitness to dive, both for physiological and behavioral reasons. In some cases, prescription drug use might have a net positive effect when viably treating an underlying condition. However, the side effects of viable medication frequently have undesirable influences on the fitness of a diver. Most cases of recreational drug use result in an impaired fitness to dive, and a significantly increased risk of sub-optimal response to emergencies. (Full article...)

Hyperbaric medicine is medical treatment in which an increase in barometric pressure over ambient pressure is employed increasing the partial pressures of all gases present in the ambient atmosphere. The immediate effects include reducing the size of gas embolisms and raising the partial pressures of all gases present according to Henry's law.
Currently, there are two types of hyperbaric medicine depending on the gases compressed, hyperbaric air and hyperbaric oxygen.

Hyperbaric air (HBA), consists of compressed atmospheric air (79% nitrogen, 21% oxygen, and minor gases) and is FDA-approved for acute mountain sickness. The hyperbaric air environment is created by placing the patient in a portable hyperbaric air chamber and inflating that chamber up to 7.35 psi gauge (1.5 atmospheres absolute) using a foot-operated or electric air pump. Although the mechanisms of hyperbaric air are poorly understood it is thought that it relieves hypoxemia caused by the decreased partial pressure of oxygen resulting from high altitude by increasing the partial pressure of air (including oxygen and nitrogen) simulating a descent in altitude.

Hyperbaric oxygen therapy (HBOT), the medical use of greater than 99% oxygen at an ambient pressure higher than atmospheric pressure, and therapeutic recompression for decompression illness, intended to reduce the injurious effects of systemic gas bubbles by physically reducing their size and providing improved conditions for elimination of bubbles and excess dissolved gas.

The equipment required for hyperbaric oxygen treatment consists of a pressure vessel for human occupancy, which may be of rigid or flexible construction, and a means of a controlled atmosphere supply. Operation is performed to a predetermined schedule by trained personnel who monitor the patient and may adjust the schedule as required. HBOT found early use in the treatment of decompression sickness, and has also shown great effectiveness in treating conditions such as gas gangrene and carbon monoxide poisoning. More recent research has examined the possibility that it may also have value for other conditions such as cerebral palsy and multiple sclerosis, but no significant evidence has been found.

A pressure vessel for human occupancy (PVHO) is an enclosure that is intended to be occupied by one or more persons at a pressure which differs from ambient by at least 2 pounds per square inch (0.14 bar). All chambers used in the US made for hyperbaric medicine fall under the jurisdiction of the Federal Food and Drug Agency (FDA). The FDA requires hyperbaric chambers to comply with the American Society of Mechanical Engineers PVHO Codes and the National Fire Protection Association Standard 99, Health Care Facilities Code. Similar conditions apply in most other countries.

Hyperbaric medicine poses some inherent hazards that are mitigated by FDA-compliant equipment and trained personnel. Serious injury can occur at pressures as low as 2 psig (13.8 kPa) if a person in the PVHO is rapidly decompressed. If oxygen is used in the hyperbaric therapy, this can increase the fire hazard. This is why the FDA requires hyperbaric chambers to meet ASME PVHO and NFPA 99 standards or the local equivalent. All chambers that meet FDA standards must have an ASME data plate, and people seeking hyperbaric treatment should check to ensure the equipment and facilities are to proper standards.

Therapeutic recompression is usually also provided in a hyperbaric chamber. It is the definitive treatment for decompression sickness and may also be used to treat arterial gas embolism caused by pulmonary barotrauma of ascent. In emergencies divers may sometimes be treated by in-water recompression (when a chamber is not available) if suitable diving equipment (to reasonably secure the airway) is available.

A number of hyperbaric treatment schedules have been published over the years for both therapeutic recompression and hyperbaric oxygen therapy for other conditions. Some of these use breathing gases other than air or pure oxygen, when the partial pressure of oxygen must be limited but the pressure required is relatively high. Nitrox and Heliox treatment schedules are available for these cases. Treatment gas may be the ambient chamber gas, or delivered via a built-in breathing system. (Full article...)

In-water recompression (IWR) or underwater oxygen treatment is the emergency treatment of decompression sickness (DCS) by returning the diver underwater to help the gas bubbles in the tissues, which are causing the symptoms, to resolve. It is a procedure that exposes the diver to significant risk which should be compared with the risk associated with the available options and balanced against the probable benefits. Some authorities recommend that it is only to be used when the time to travel to the nearest recompression chamber is too long to save the victim's life; others take a more pragmatic approach and accept that in some circumstances IWR is the best available option. The risks may not be justified for case of mild symptoms likely to resolve spontaneously, or for cases where the diver is likely to be unsafe in the water, but in-water recompression may be justified in cases where severe outcomes are likely if not recompressed, if conducted by a competent and suitably equipped team.

Carrying out in-water recompression when there is a nearby recompression chamber or without suitable equipment and training is never a desirable option. The risk of the procedure is due to the diver suffering from DCS being seriously ill and may become paralysed, unconscious, or stop breathing while underwater. Any one of these events is likely to result in the diver drowning or asphyxiating or suffering further injury during a subsequent rescue to the surface. This risk can be reduced by improving airway security by using surface supplied gas and a helmet or full-face mask. Risk of injury during emergency surfacing is minimised by treatment on 100% oxygen, which is also the only gas with a reliable record of positive outcomes. Early recompression on oxygen has a high rate of complete resolution of symptoms, even for shallower and shorter treatment than the highly successful US Navy Treatment Table 6.

Several schedules have been published for in-water recompression treatment, but little data on their efficacy is available. The Australian Navy tables and US Navy Tables may have the largest amount of empirical evidence supporting their efficacy. (Full article...)

In aviation and underwater diving, alternobaric vertigo is dizziness resulting from unequal pressures being exerted between the ears due to one Eustachian tube being less patent than the other. (Full article...)

Hypoxia is a condition in which the body or a region of the body is deprived of adequate oxygen supply at the tissue level. Hypoxia may be classified as either generalized, affecting the whole body, or local, affecting a region of the body. Although hypoxia is often a pathological condition, variations in arterial oxygen concentrations can be part of the normal physiology, for example, during strenuous physical exercise.

Hypoxia differs from hypoxemia and anoxemia, in that hypoxia refers to a state in which oxygen present in a tissue or the whole body is insufficient, whereas hypoxemia and anoxemia refer specifically to states that have low or no oxygen in the blood. Hypoxia in which there is complete absence of oxygen supply is referred to as anoxia.

Hypoxia can be due to external causes, when the breathing gas is hypoxic, or internal causes, such as reduced effectiveness of gas transfer in the lungs, reduced capacity of the blood to carry oxygen, compromised general or local perfusion, or inability of the affected tissues to extract oxygen from, or metabolically process, an adequate supply of oxygen from an adequately oxygenated blood supply.

Generalized hypoxia occurs in healthy people when they ascend to high altitude, where it causes altitude sickness leading to potentially fatal complications: high altitude pulmonary edema (HAPE) and high altitude cerebral edema (HACE). Hypoxia also occurs in healthy individuals when breathing inappropriate mixtures of gases with a low oxygen content, e.g., while diving underwater, especially when using malfunctioning closed-circuit rebreather systems that control the amount of oxygen in the supplied air. Mild, non-damaging intermittent hypoxia is used intentionally during altitude training to develop an athletic performance adaptation at both the systemic and cellular level.

Hypoxia is a common complication of preterm birth in newborn infants. Because the lungs develop late in pregnancy, premature infants frequently possess underdeveloped lungs. To improve blood oxygenation, infants at risk of hypoxia may be placed inside incubators that provide warmth, humidity, and supplemental oxygen. More serious cases are treated with continuous positive airway pressure (CPAP). (Full article...)

Taravana is a disease often found among Polynesian island natives who habitually dive deep without breathing apparatus many times in close succession, usually for food or pearls. These free-divers may make 40 to 60 dives a day, each of 30 or 40 metres (100 to 140 feet).

Taravana seems to be decompression sickness. The usual symptoms are vertigo, nausea, lethargy, paralysis and death. The word taravana is Tuamotu Polynesian for "to fall crazily".

Taravana is also used to describe someone who is "crazy because of the sea". (Full article...)

Carbon monoxide poisoning typically occurs from breathing in carbon monoxide (CO) at excessive levels. Symptoms are often described as "flu-like" and commonly include headache, dizziness, weakness, vomiting, chest pain, and confusion. Large exposures can result in loss of consciousness, arrhythmias, seizures, or death. The classically described "cherry red skin" rarely occurs. Long-term complications may include chronic fatigue, trouble with memory, and movement problems.


CO is a colorless and odorless gas which is initially non-irritating. It is produced during incomplete burning of organic matter. This can occur from motor vehicles, heaters, or cooking equipment that run on carbon-based fuels. Carbon monoxide primarily causes adverse effects by combining with hemoglobin to form carboxyhemoglobin (symbol COHb or HbCO) preventing the blood from carrying oxygen and expelling carbon dioxide as carbaminohemoglobin. Additionally, many other hemoproteins such as myoglobin, Cytochrome P450, and mitochondrial cytochrome oxidase are affected, along with other metallic and non-metallic cellular targets.

Diagnosis is typically based on a HbCO level of more than 3% among nonsmokers and more than 10% among smokers. The biological threshold for carboxyhemoglobin tolerance is typically accepted to be 15% COHb, meaning toxicity is consistently observed at levels in excess of this concentration. The FDA has previously set a threshold of 14% COHb in certain clinical trials evaluating the therapeutic potential of carbon monoxide. In general, 30% COHb is considered severe carbon monoxide poisoning. The highest reported non-fatal carboxyhemoglobin level was 73% COHb.


Efforts to prevent poisoning include carbon monoxide detectors, proper venting of gas appliances, keeping chimneys clean, and keeping exhaust systems of vehicles in good repair. Treatment of poisoning generally consists of giving 100% oxygen along with supportive care. This procedure is often carried out until symptoms are absent and the HbCO level is less than 3%/10%.


Carbon monoxide poisoning is relatively common, resulting in more than 20,000 emergency room visits a year in the United States. It is the most common type of fatal poisoning in many countries. In the United States, non-fire related cases result in more than 400 deaths a year. Poisonings occur more often in the winter, particularly from the use of portable generators during power outages. The toxic effects of CO have been known since ancient history. The discovery that hemoglobin is affected by CO emerged with an investigation by James Watt and Thomas Beddoes into the therapeutic potential of hydrocarbonate in 1793, and later confirmed by Claude Bernard between 1846 and 1857. (Full article...)

Decompression sickness (DCS; also called divers' disease, the bends, aerobullosis, and caisson disease) is a medical condition caused by dissolved gases emerging from solution as bubbles inside the body tissues during decompression. DCS most commonly occurs during or soon after a decompression ascent from underwater diving, but can also result from other causes of depressurisation, such as emerging from a caisson, decompression from saturation, flying in an unpressurised aircraft at high altitude, and extravehicular activity from spacecraft. DCS and arterial gas embolism are collectively referred to as decompression illness.

Since bubbles can form in or migrate to any part of the body, DCS can produce many symptoms, and its effects may vary from joint pain and rashes to paralysis and death. DCS often causes air bubbles to settle in major joints like knees or elbows, causing individuals to bend over in excruciating pain, hence its common name, the bends. Individual susceptibility can vary from day to day, and different individuals under the same conditions may be affected differently or not at all. The classification of types of DCS according to symptoms has evolved since its original description in the 19th century. The severity of symptoms varies from barely noticeable to rapidly fatal.

Decompression sickness can occur after an exposure to increased pressure while breathing a gas with a metabolically inert component, then decompressing too fast for it to be harmlessly eliminated through respiration, or by decompression by an upward excursion from a condition of saturation by the inert breathing gas components, or by a combination of these routes. Theoretical decompression risk is controlled by the tissue compartment with the highest inert gas concentration, which for decompression from saturation is the slowest tissue to outgas.

The risk of DCS can be managed through proper decompression procedures, and contracting the condition has become uncommon. Its potential severity has driven much research to prevent it, and divers almost universally use decompression schedules or dive computers to limit their exposure and to monitor their ascent speed. If DCS is suspected, it is treated by hyperbaric oxygen therapy in a recompression chamber. Where a chamber is not accessible within a reasonable time frame, in-water recompression may be indicated for a narrow range of presentations, if there are suitably skilled personnel and appropriate equipment available on site. Diagnosis is confirmed by a positive response to the treatment. Early treatment results in a significantly higher chance of successful recovery. (Full article...)

Barotrauma is physical damage to body tissues caused by a difference in pressure between a gas space inside, or in contact with, the body and the surrounding gas or liquid. The initial damage is usually due to over-stretching the tissues in tension or shear, either directly by an expansion of the gas in the closed space or by pressure difference hydrostatically transmitted through the tissue. Tissue rupture may be complicated by the introduction of gas into the local tissue or circulation through the initial trauma site, which can cause blockage of circulation at distant sites or interfere with the normal function of an organ by its presence. The term is usually applied when the gas volume involved already exists prior to decompression. Barotrauma can occur during both compression and decompression events.

Barotrauma generally manifests as sinus or middle ear effects, lung overpressure injuries and injuries resulting from external squeezes. Decompression sickness is indirectly caused by ambient pressure reduction, and tissue damage is caused directly and indirectly by gas bubbles. However, these bubbles form out of supersaturated solution from dissolved gases, and are not generally considered barotrauma. Decompression illness is a term that includes decompression sickness and arterial gas embolism caused by lung overexpansion barotrauma. It is also classified under the broader term of dysbarism, which covers all medical conditions resulting from changes in ambient pressure.

Barotrauma typically occurs when the organism is exposed to a significant change in ambient pressure, such as when a scuba diver, a free-diver or an airplane passenger ascends or descends or during uncontrolled decompression of a pressure vessel such as a diving chamber or pressurized aircraft, but can also be caused by a shock wave. Ventilator-induced lung injury (VILI) is a condition caused by over-expansion of the lungs by mechanical ventilation used when the body is unable to breathe for itself and is associated with relatively large tidal volumes and relatively high peak pressures. Barotrauma due to overexpansion of an internal gas-filled space may also be termed volutrauma. (Full article...)

Decompression Illness (DCI) comprises two different conditions caused by rapid decompression of the body. These conditions present similar symptoms and require the same initial first aid. Scuba divers are trained to ascend slowly from depth to avoid DCI. Although the incidence is relatively rare, the consequences can be serious and potentially fatal, especially if untreated. (Full article...)

High-pressure nervous syndrome (HPNS – also known as high-pressure neurological syndrome) is a neurological and physiological diving disorder which can result when a diver descends below about 500 feet (150 m) using a breathing gas containing helium. The effects experienced, and the severity of those effects, depend on the rate of descent, the depth and the percentage of helium.

"Helium tremors" were described in 1965 by Royal Navy physiologist Peter B. Bennett. Soviet scientist G. L. Zal'tsman first reported on helium tremors in his experiments from 1961. These reports were not available in the West until 1967.

The term high-pressure nervous syndrome was first used by R. W. Brauer in 1968 to describe the combined symptoms of tremor, electroencephalography (EEG) changes, and somnolence that appeared during a 1,189-foot (362 m) chamber dive in Marseille. (Full article...)

Diving disorders, or diving related medical conditions, are conditions associated with underwater diving, and include both conditions unique to underwater diving, and those that also occur during other activities. This second group further divides conditions caused by exposure to ambient pressures significantly different from surface atmospheric pressure, and a range of conditions caused by general environment and equipment associated with diving activities.

Disorders particularly associated with diving include those caused by variations in ambient pressure, such as barotraumas of descent and ascent, decompression sickness and those caused by exposure to elevated ambient pressure, such as some types of gas toxicity. There are also non-dysbaric disorders associated with diving, which include the effects of the aquatic environment, such as drowning, which also are common to other water users, and disorders caused by the equipment or associated factors, such as carbon dioxide and carbon monoxide poisoning. General environmental conditions can lead to another group of disorders, which include hypothermia and motion sickness, injuries by marine and aquatic organisms, contaminated waters, man-made hazards, and ergonomic problems with equipment. Finally there are pre-existing medical and psychological conditions which increase the risk of being affected by a diving disorder, which may be aggravated by adverse side effects of medications and other drug use.

Treatment depends on the specific disorder, but often includes oxygen therapy, which is standard first aid for most diving accidents, and is hardly ever contra-indicated for a person medically fit to dive, and hyperbaric therapy is the definitive treatment for decompression sickness. Screening for medical fitness to dive can reduce some of the risk for some of the disorders. (Full article...)

Laryngospasm is an uncontrolled or involuntary muscular contraction (spasm) of the vocal folds. It may be triggered when the vocal cords or the area of the trachea below the vocal folds detects the entry of water, mucus, blood, or other substance. It may be associated with stridor or retractions. (Full article...)

In physiology, isobaric counterdiffusion (ICD) is the diffusion of different gases into and out of tissues while under a constant ambient pressure, after a change of gas composition, and the physiological effects of this phenomenon. The term inert gas counterdiffusion is sometimes used as a synonym, but can also be applied to situations where the ambient pressure changes. It has relevance in mixed gas diving and anesthesiology. (Full article...)

Drowning is a type of suffocation induced by the submersion of the mouth and nose in a liquid. Submersion injury refers to both drowning and near-miss incident. Most instances of fatal drowning occur alone or in situations where others present are either unaware of the victim's situation or unable to offer assistance. After successful resuscitation, drowning victims may experience breathing problems, confusion, or unconsciousness. Occasionally, victims may not begin experiencing these symptoms until several hours after they are rescued. An incident of drowning can also cause further complications for victims due to low body temperature, aspiration, or acute respiratory distress syndrome (respiratory failure from lung inflammation).

Drowning is more likely to happen when spending extended periods of time near large bodies of water. Risk factors for drowning include alcohol use, drug use, epilepsy, minimal swim training or a complete lack of training, and, in the case of children, a lack of supervision. Common drowning locations include natural and man-made bodies of water, bathtubs, and swimming pools.

Drowning occurs when a person spends too much time with their nose and mouth submerged in a liquid to the point of being unable to breathe. If this is not followed by an exit to the surface, low oxygen levels and excess carbon dioxide in the blood trigger a neurological state of breathing emergency, which results in increased physical distress and occasional contractions of the vocal folds. Significant amounts of water usually only enter the lungs later in the process.

While the word "drowning" is commonly associated with fatal results, drowning may be classified into three different types: drowning that results in death, drowning that results in long-lasting health problems, and drowning that results in no health complications. Sometimes the term "near-drowning" is used in the latter cases. Among children who survive, health problems occur in about 7.5% of cases.

Steps to prevent drowning include teaching children and adults to swim and to recognise unsafe water conditions, never swimming alone, use of personal flotation devices on boats and when swimming in unfavourable conditions, limiting or removing access to water (such as with fencing of swimming pools), and exercising appropriate supervision. Treatment of victims who are not breathing should begin with opening the airway and providing five breaths of mouth-to-mouth resuscitation. Cardiopulmonary resuscitation (CPR) is recommended for a person whose heart has stopped beating and has been underwater for less than an hour. (Full article...)

The APS underwater assault rifle (Russian: Автомат Подводный Специальный, romanized: Avtomat Podvodny Spetsialnyy, lit. 'Special Underwater Assault Rifle') is an underwater firearm designed by the Soviet Union in the early 1970s. It was adopted in 1975. Made by the Tula Arms Plant (Тульский Оружейный Завод, Tul'skiy Oruzheynyy Zavod) in Russia, it is exported by Rosoboronexport.

Under water, ordinary bullets are inaccurate and have a very short range. The APS fires a 120-millimetre-long (4.7 in), 5.66 mm calibre steel bolt specially designed for this weapon. Its magazine holds 26 rounds. The APS's barrel is not rifled; the fired projectile is kept in line by hydrodynamic effects; as a result, the APS is somewhat inaccurate when fired out of water.

The APS has a longer range and more penetrating power than spearguns. This is useful in such situations such as shooting an opposing diver through a reinforced dry suit, a protective helmet (whether air-holding or not), thick tough parts of breathing sets and their harnesses, and the plastic casings and transparent covers of some small underwater vehicles.

The APS is more powerful than a pistol, but is bulkier, heavier and takes longer to aim, particularly swinging its long barrel and large flat magazine sideways through water. (Full article...)

The ADS (Russian: АДС - Автомат Двухсредный Специальный - Special Dual-environment Automatic rifle) is a Russian assault rifle specially made for combat divers. It is of a bullpup layout and is chambered in the 5.45×39mm M74 round. The ADS can adapt a suppressor and optical sights. (Full article...)

The M1 Underwater Defense Gun, also called the Underwater Defense Gun Mark 1 Mod 0, is an underwater firearm developed by the United States during the Cold War. Similar to other underwater firearms, it fires a special 4.25-inch (108 mm) metal dart as its projectile. (Full article...)

A speargun is a ranged underwater fishing device designed to launch a tethered spear or harpoon to impale fish or other marine animals and targets. Spearguns are used in sport fishing and underwater target shooting. The two basic types are pneumatic and elastic (powered by rubber bands). Spear types come in a number of varieties including threaded, break-away and lined. Floats and buoys are common accessories when targeting larger fish. (Full article...)

The Heckler & Koch P11 is an underwater firearm developed in 1976 by Heckler & Koch. It is loaded using a pepper-box-like assembly, containing five sealed barrels each containing an electrically-fired projectile. Two styles of barrel assembly can be used: one containing five 7.62×36mm flechette darts for use underwater, or five 133-grain bullets for use above water. (Full article...)

A limpet mine is a type of naval mine attached to a target by magnets. It is so named because of its superficial similarity to the shape of the limpet, a type of sea snail that clings tightly to rocks or other hard surfaces.

A swimmer or diver may attach the mine, which is usually designed with hollow compartments to give the mine just slight negative buoyancy, making it easier to handle underwater. (Full article...)

A polespear (hand spear or gidgee) is an underwater tool used in spearfishing, consisting of a pole, a spear tip, and a rubber loop. Polespears are often mistakenly called Hawaiian slings, but the tools differ. A Hawaiian sling is akin to a slingshot or an underwater bow and arrow, since the spear and the propelling device are separate, while a polespear has the sling (rubber loop) attached to the spear. (Full article...)

The Gyrojet is a family of unique firearms developed in the 1960s named for the method of gyroscopically stabilizing its projectiles. Rather than inert bullets, Gyrojets fire small rockets called Microjets which have little recoil and do not require a heavy barrel or chamber to resist the pressure of the combustion gases. Velocity on leaving the tube was very low, but increased to around 1,250 feet per second (380 m/s) at 30 feet (9.1 m). The result is a very lightweight and transportable weapon.

Long out of production, today they are a coveted collector's item with prices for even the most common model ranging above $1,000. They are rarely fired; ammunition is scarce and can cost over $200 per round. (Full article...)

A remotely operated underwater vehicle (ROUV) or remotely operated vehicle (ROV) is a free-swimming submersible craft used to perform underwater observation, inspection and physical tasks such as valve operations, hydraulic functions and other general tasks within the subsea oil and gas industry, military, scientific and other applications. ROVs can also carry tooling packages for undertaking specific tasks such as pull-in and connection of flexible flowlines and umbilicals, and component replacement. They are often used to visit wrecks at great depths beyond the capacities of submersibles for research purposes, such as the Titanic, amongst others. (Full article...)

The ASM-DT is a Russian prototype folding-stock underwater firearm. It emerged in the 1990s. (Full article...)

An airlift is device based on a pipe, used in nautical archaeology to suck small objects, sand and mud from the sea bed and to transport the resulting debris upwards and away from its source. It is a type of suction dredge. A water dredge or water eductor may be used for the same purpose.

Typically, the airlift is constructed from a 3-metre to 10 metre long, 10 cm diameter pipe. A controllable compressed air supply vents into the inside, lower end of the pipe (The input end always being the lower end). Compressed air is injected into the pipe in one to three second bursts with an interval long enough to let the resulting bubble to rise to the higher, output end of the pipe. The bubble moves water through the pipe sucking debris from the lower end and depositing it from the upper end of the pipe. Ejected debris can be either cast off (as in simply removing overburden) or collected in a mesh cage for inspection (as more often is the case in nautical archaeology). It is often designed to be hand-operated by a diver.

Airlift pumps are used by water utilities, farmers and others to extract water from deep wells. In such cases the pipes can be 30, 60 or more meters deep underground. Airlift pumps are governed by the physics of two-phase flow. (Full article...)

A tremie is a watertight pipe, usually of about 250 mm inside diameter (150 to 300 mm), with a conical hopper at its upper end above the water level. It may have a loose plug or a valve at the bottom end. A tremie is usually used to pour concrete underwater in a way that avoids washout of cement from the mix due to turbulent water contact with the concrete while it is flowing. This produces a more reliable strength of the product. Common applications include:

• Caissons, which are the foundations of bridges, among other things, that span bodies of water.
• Pilings.
• Monitoring wells. Builders use tremie methods for materials other than concrete, and for industries other than construction. For example, bentonite slurries for monitoring wells are often emplaced via tremie pipe.

(Full article...)

The SPP-1 underwater pistol was made in the Soviet Union for use by Soviet frogmen as an underwater firearm. It was developed in the late 1960s and accepted for use in 1975. Under water, ordinary-shaped bullets are inaccurate and very short-range. As a result, this pistol fires a round-based 4.5 millimetres (0.18 in) caliber steel dart about 115 millimetres (4.5 in) long, weighing 12.8 grams (0.45 oz), which has longer range and more penetrating power than speargun spears. The complete cartridge is 145 millimetres (5.7 in) long and weighs 17.5 grams (0.62 oz). (Full article...)

The Hawaiian sling is a device used in spearfishing. The sling operates much like a bow and arrow does on land, but energy is stored in rubber tubing rather than a wooden or fiberglass bow. (Full article...)

Powerhead may refer to:

• Powerhead (firearm), a direct-contact, underwater firearm
• Powerhead (aquarium), a submersible aquarium pump
• Powerhead (rocket engine), the preburners and turbopumps of a pump-fed rocket engine (excludes the engine combustion chamber and nozzle)
• Powerhead (pump), the mechanical drive of any one of several non-aquarium pump types; marine propeller powerhead, fountain powerhead, etc.

(Full article...)

Christian James Lambertsen (May 15, 1917 – February 11, 2011) was an American environmental medicine and diving medicine specialist who was principally responsible for developing the United States Navy frogmen's rebreathers in the early 1940s for underwater warfare. Lambertsen designed a series of rebreathers in 1940 (patent filing date: 16 Dec 1940) and in 1944 (patent issue date: 2 May 1944) and first called his invention breathing apparatus. Later, after the war, he called it Laru (acronym for Lambertsen Amphibious Respiratory Unit) and finally, in 1952, he changed his invention's name again to SCUBA (Self Contained Underwater Breathing Apparatus). Although diving regulator technology was invented by Émile Gagnan and Jacques-Yves Cousteau in 1943 and was unrelated to rebreathers, the current use of the word SCUBA is largely attributed to the Gagnan-Cousteau invention. The US Navy considers Lambertsen to be "the father of the Frogmen". (Full article...)

The timeline of underwater diving technology is a chronological list of notable events in the history of the development of underwater diving equipment. With the partial exception of breath-hold diving, the development of underwater diving capacity, scope, and popularity, has been closely linked to available technology, and the physiological constraints of the underwater environment.

Primary constraints are:

• the provision of breathing gas to allow endurance beyond the limits of a single breath,
• safely decompressing from high underwater pressure to surface pressure,
• the ability to see clearly enough to effectively perform the task,
• and sufficient mobility to get to and from the workplace.

(Full article...)

The history of scuba diving is closely linked with the history of the equipment. By the turn of the twentieth century, two basic architectures for underwater breathing apparatus had been pioneered; open-circuit surface supplied equipment where the diver's exhaled gas is vented directly into the water, and closed-circuit breathing apparatus where the diver's carbon dioxide is filtered from the exhaled breathing gas, which is then recirculated, and more gas added to replenish the oxygen content. Closed circuit equipment was more easily adapted to scuba in the absence of reliable, portable, and economical high pressure gas storage vessels. By the mid-twentieth century, high pressure cylinders were available and two systems for scuba had emerged: open-circuit scuba where the diver's exhaled breath is vented directly into the water, and closed-circuit scuba where the carbon dioxide is removed from the diver's exhaled breath which has oxygen added and is recirculated. Oxygen rebreathers are severely depth limited due to oxygen toxicity risk, which increases with depth, and the available systems for mixed gas rebreathers were fairly bulky and designed for use with diving helmets. The first commercially practical scuba rebreather was designed and built by the diving engineer Henry Fleuss in 1878, while working for Siebe Gorman in London. His self contained breathing apparatus consisted of a rubber mask connected to a breathing bag, with an estimated 50–60% oxygen supplied from a copper tank and carbon dioxide scrubbed by passing it through a bundle of rope yarn soaked in a solution of caustic potash. During the 1930s and all through World War II, the British, Italians and Germans developed and extensively used oxygen rebreathers to equip the first frogmen. In the U.S. Major Christian J. Lambertsen invented a free-swimming oxygen rebreather. In 1952 he patented a modification of his apparatus, this time named SCUBA, an acronym for "self-contained underwater breathing apparatus," which became the generic English word for autonomous breathing equipment for diving, and later for the activity using the equipment. After World War II, military frogmen continued to use rebreathers since they do not make bubbles which would give away the presence of the divers. The high percentage of oxygen used by these early rebreather systems limited the depth at which they could be used due to the risk of convulsions caused by acute oxygen toxicity.

Although a working demand regulator system had been invented in 1864 by Auguste Denayrouze and Benoît Rouquayrol, the first open-circuit scuba system developed in 1925 by Yves Le Prieur in France was a manually adjusted free-flow system with a low endurance, which limited the practical usefulness of the system. In 1942, during the German occupation of France, Jacques-Yves Cousteau and Émile Gagnan designed the first successful and safe open-circuit scuba, a twin hose system known as the Aqua-Lung. Their system combined an improved demand regulator with high-pressure air tanks. This was patented in 1945. To sell his regulator in English-speaking countries Cousteau registered the Aqua-Lung trademark, which was first licensed to the U.S. Divers company, and in 1948 to Siebe Gorman of England.

Early scuba sets were usually provided with a plain harness of shoulder straps and waist belt. Many harnesses did not have a backplate, and the cylinders rested directly against the diver's back. Early scuba divers dived without a buoyancy aid. In an emergency they had to jettison their weights. In the 1960s adjustable buoyancy life jackets (ABLJ) became available, which can be used to compensate for loss of buoyancy at depth due to compression of the neoprene wetsuit and as a lifejacket that will hold an unconscious diver face-upwards at the surface. The first versions were inflated from a small disposable carbon dioxide cylinder, later with a small direct coupled air cylinder. A low-pressure feed from the regulator first-stage to an inflation/deflation valve unit an oral inflation valve and a dump valve lets the volume of the ABLJ be controlled as a buoyancy aid. In 1971 the stabilizer jacket was introduced by ScubaPro. This class of buoyancy aid is known as a buoyancy control device or buoyancy compensator. A backplate and wing is an alternative configuration of scuba harness with a buoyancy compensation bladder known as a "wing" mounted behind the diver, sandwiched between the backplate and the cylinder or cylinders. This arrangement became popular with cave divers making long or deep dives, who needed to carry several extra cylinders, as it clears the front and sides of the diver for other equipment to be attached in the region where it is easily accessible. Sidemount is a scuba diving equipment configuration which has basic scuba sets, each comprising a single cylinder with a dedicated regulator and pressure gauge, mounted alongside the diver, clipped to the harness below the shoulders and along the hips, instead of on the back of the diver. It originated as a configuration for advanced cave diving, as it facilitates penetration of tight sections of cave, as sets can be easily removed and remounted when necessary. Sidemount diving has grown in popularity within the technical diving community for general decompression diving, and has become a popular specialty for recreational diving.

In the 1950s the United States Navy (USN) documented procedures for military use of what is now called nitrox, and in 1970, Morgan Wells, of NOAA, began instituting diving procedures for oxygen-enriched air. In 1979 NOAA published procedures for the scientific use of nitrox in the NOAA Diving Manual. In 1985 IAND (International Association of Nitrox Divers) began teaching nitrox use for recreational diving. After initial resistance by some agencies, the use of a single nitrox mixture has become part of recreational diving, and multiple gas mixtures are common in technical diving to reduce overall decompression time. Oxygen toxicity limits the depth when breathing nitrox mixtures. In 1924 the U.S. Navy started to investigate the possibility of using helium and after animal experiments, human subjects breathing heliox 20/80 (20% oxygen, 80% helium) were successfully decompressed from deep dives, Cave divers started using trimix to allow deeper dives and it was used extensively in the 1987 Wakulla Springs Project and spread to the north-east American wreck diving community. The challenges of deeper dives and longer penetrations and the large amounts of breathing gas necessary for these dive profiles and ready availability of oxygen sensing cells beginning in the late 1980s led to a resurgence of interest in rebreather diving. By accurately measuring the partial pressure of oxygen, it became possible to maintain and accurately monitor a breathable gas mixture in the loop at any depth. In the mid 1990s semi-closed circuit rebreathers became available for the recreational scuba market, followed by closed circuit rebreathers around the turn of the millennium. Rebreathers are currently (2018) manufactured for the military, technical and recreational scuba markets. (Full article...)

The sinking of Rainbow Warrior, codenamed Opération Satanique, was an act of French state-sponsored terrorism. Described as a "covert operation" by the "action" branch of the French foreign intelligence agency, the Directorate-General for External Security (DGSE), the terrorist attack was carried out on 10 July 1985. During the operation, two operatives (both French citizens) sank the flagship of the Greenpeace fleet, Rainbow Warrior, at the Port of Auckland on her way to a protest against a planned French nuclear test in Moruroa. Fernando Pereira, a photographer, drowned on the sinking ship.

The sinking was a cause of embarrassment to France and President François Mitterrand. They initially denied responsibility, but two French agents were captured by New Zealand Police and charged with arson, conspiracy to commit arson, willful damage, and murder. It resulted in a scandal that led to the resignation of the French Defence Minister Charles Hernu, while the two agents pleaded guilty to manslaughter and were sentenced to ten years in prison. Despite being sentenced to 10 years imprisonment, due to pressures from the French state they spent merely two years confined to the Polynesian island of Hao before being freed by the French government.

France was also forced to apologise and had to pay reparations to New Zealand, Pereira's family and Greenpeace. (Full article...)

Operation Algeciras was a failed Argentine plan to sabotage a Royal Navy warship in Gibraltar during the Falklands War. The Argentine reasoning was that if the British military felt vulnerable in Europe, they would decide to keep some vessels in European waters rather than send them to the Falklands.

A commando team observed British naval traffic in the area from Spain during 1982, waiting to attack a target of opportunity when ordered, using frogmen and Italian limpet mines.

The plan was to launch divers from Algeciras, have them swim across the bay, to Gibraltar, under cover of darkness, attach the mines to a British naval ship and swim back to Algeciras. The timed detonators would cause the mines to explode after the divers had time to safely swim back across the bay. The plan was foiled when the Spanish police became suspicious of their behaviour and arrested them before any attack could be mounted. (Full article...)

This is a listing of researchers who have made discoveries or inventions relating to the science and technology of underwater diving.
Divers who have become notable due to their exploits are not listed here, unless they have published research findings or invented an important item of diving related equipment. For these, see Outline of underwater divers. (Full article...)

The Russian government committed to raising the wreck and recovering the crew's remains in a US$65-million salvage operation. They contracted with Dutch marine salvage companies Smit International and Mammoet to raise Kursk from the sea floor. It became the largest salvage operation of its type ever accomplished. The salvage operation was extremely dangerous because of the risk of radiation from the reactor. Only seven of the submarine's 24 torpedoes were accounted for. (Full article...)

Decompression in the context of diving derives from the reduction in ambient pressure experienced by the diver during the ascent at the end of a dive or hyperbaric exposure and refers to both the reduction in pressure and the process of allowing dissolved inert gases to be eliminated from the tissues during this reduction in pressure.

When a diver descends in the water column the ambient pressure rises. Breathing gas is supplied at the same pressure as the surrounding water, and some of this gas dissolves into the diver's blood and other tissues. Inert gas continues to be taken up until the gas dissolved in the diver is in a state of equilibrium with the breathing gas in the diver's lungs, (see: "Saturation diving"), or the diver moves up in the water column and reduces the ambient pressure of the breathing gas until the inert gases dissolved in the tissues are at a higher concentration than the equilibrium state, and start diffusing out again. Dissolved inert gases such as nitrogen or helium can form bubbles in the blood and tissues of the diver if the partial pressures of the dissolved gases in the diver get too high when compared to the ambient pressure. These bubbles, and products of injury caused by the bubbles, can cause damage to tissues generally known as decompression sickness or the bends. The immediate goal of controlled decompression is to avoid development of symptoms of bubble formation in the tissues of the diver, and the long-term goal is to also avoid complications due to sub-clinical decompression injury.

The symptoms of decompression sickness are known to be caused by damage resulting from the formation and growth of bubbles of inert gas within the tissues and by blockage of arterial blood supply to tissues by gas bubbles and other emboli consequential to bubble formation and tissue damage. The precise mechanisms of bubble formation and the damage they cause has been the subject of medical research for a considerable time and several hypotheses have been advanced and tested. Tables and algorithms for predicting the outcome of decompression schedules for specified hyperbaric exposures have been proposed, tested, and used, and usually found to be of some use but not entirely reliable. Decompression remains a procedure with some risk, but this has been reduced and is generally considered to be acceptable for dives within the well-tested range of commercial, military and recreational diving.

The first recorded experimental work related to decompression was conducted by Robert Boyle, who subjected experimental animals to reduced ambient pressure by use of a primitive vacuum pump. In the earliest experiments the subjects died from asphyxiation, but in later experiments, signs of what was later to become known as decompression sickness were observed. Later, when technological advances allowed the use of pressurisation of mines and caissons to exclude water ingress, miners were observed to present symptoms of what would become known as caisson disease, the bends, and decompression sickness. Once it was recognized that the symptoms were caused by gas bubbles, and that recompression could relieve the symptoms, further work showed that it was possible to avoid symptoms by slow decompression, and subsequently various theoretical models have been derived to predict low-risk decompression profiles and treatment of decompression sickness. (Full article...)

Operation Thunderhead was a highly classified combat mission conducted by U.S. Navy SEAL Team One and Underwater Demolition Team 11 (UDT-11) in 1972. The mission was conducted off the coast of North Vietnam during the Vietnam War to rescue two U.S. airmen said to be escaping from a prisoner of war prison in Hanoi. The prisoners, including Air Force Colonel John A. Dramesi were planning to steal a boat and travel down the Red River to the Gulf of Tonkin.

Lieutenant Melvin Spence Dry was killed on the mission. He was the last SEAL lost during the Vietnam War. His father, retired Navy Captain Melvin H. Dry, spent the rest of his life trying to learn the circumstances surrounding his son's death. The details, however, were long shrouded in secrecy. (Full article...)

Vintage scuba is scuba equipment dating from 1975 and earlier, and the practice of diving using such equipment. (Full article...)

Brian Andrew Hills, born 19 March 1934 in Cardiff, Wales, died 13 January 2006 in Brisbane, Queensland, was a physiologist who worked on decompression theory.

Early decompression work was done with Hugh LeMessurier's aeromedicine group at the department of Physiology, University of Adelaide. His "thermodynamic decompression model" was one of the first models in which decompression is controlled by the volume of gas bubbles coming out of solution. In this model, pain only DCS is modelled by a single tissue which is diffusion-limited for gas uptake, and bubble-formation during decompression causes "phase equilibration" of partial pressures between dissolved and free gases. The driving mechanism for gas elimination in this tissue is inherent unsaturation, also called partial pressure vacancy or the oxygen window, where oxygen metabolised is replaced by more soluble carbon dioxide. This model was used to explain the effectiveness of the Torres Strait Islands pearl divers' empirically developed decompression schedules, which used deeper decompression stops and less overall decompression time than the current naval decompression schedules. This trend to deeper decompression stops has become a feature of more recent decompression models.

Hills made a significant contribution to the mainstream scientific literature of some 186 articles between 1967 and 2006. The first 15 years of this contribution are mostly related to decompression theory. Other contributions to decompression science include the development of two early decompression computers, a method to detect tissue bubbles using electrical impedance, the use of kangaroo rats as animal models for decompression sickness, theoretical and experimental work on bubble nucleation, inert gas uptake and washout, acclimatisation to decompression sickness, and isobaric counterdiffusion. (Full article...)

The Raid on Alexandria (Operazione EA 3) was carried out on 19 December 1941 by Italian Navy (Regia Marina) divers of the Decima Flottiglia MAS (Decima Flottiglia Motoscafi Armati Siluranti [10th Flotilla MAS]), who attacked and sank two Royal Navy battleships at their moorings and damaged an oil tanker and a destroyer in the harbour of Alexandria, Egypt, using manned torpedoes.

The attacks came at a difficult time for the Mediterranean Fleet, after the loss of the aircraft carrier HMS Ark Royal and the battleship Barham to U-boats, the loss of ships during the Battle of Crete and the sinking of much of Force K on an Italian minefield, the day before the human torpedo attack on Alexandria. Ships also had to be sent to the Eastern Fleet. (Full article...)

Because Egypt had such valuable cargo, it was not long before salvage attempts began. However, Egypt's wreck was not found until 1930. She was found lying upright in a depth of 128 metres (420 ft), 70 fathoms, making recovery very difficult with the technology of the time. Giovanni Quaglia from the Genoese company Società Ricuperi Marittimi (So.Ri.Ma.) was in charge of the operation and decided to use his salvage fleet with the main ship Artiglio, on which there was embarked a famous group of expert hard hat divers under the command of the chief diver Alberto Gianni, who had invented special diving equipment.

Gianni located the wreck, and sent a diver in his specially-built Torretta Butoscopica observation bell to direct salvage operations and the placing of explosives to blast through the ship to expose the strongroom. The diver then directed a grab which picked up the gold and silver. The salvage operation continued until 1935, by which time 98% of the contents of the strong room had been recovered. The recovery was reported in detail by The Times reporter David Scott, who sent daily cables to the newspaper, and who later published two famous books on this adventure, the first very deep recovery by divers, Seventy Fathom deep, with the divers of salvage ship Artiglio and The Egypt's gold. (Full article...)

Simon Mitchell (born 1958) is a New Zealand physician specialising in occupational medicine, hyperbaric medicine and anesthesiology. Trained in medicine, Mitchell was awarded a PhD for his work on neuroprotection from embolic brain injury. Mitchell has also published more than 45 research and review papers in the medical literature. Mitchell is an author and avid technical diver. He also wrote two chapters of the latest edition of Bennett and Elliott's Physiology and Medicine of Diving, is the co-author of the diving textbook Deeper Into Diving with John Lippmann and co-authored the chapter on Diving and Hyperbaric Medicine in Harrison's Principles of Internal Medicine with Michael Bennett. (Full article...)

Open Water Diver (OWD) is an entry-level autonomous diver certification for recreational scuba diving. Although different agencies use different names, similar entry-level courses are offered by all recreational diving agencies and consist of a combination of knowledge development (theory), confined water dives (practical training) and open water dives (experience) suitable to allow the diver to dive on open circuit scuba, in open water to a limited depth and in conditions similar to those in which the diver has been trained or later gained appropriate experience, to an acceptable level of safety. (Full article...)

A diving instructor is a person who trains, and usually also assesses competence, of underwater divers. This includes freedivers, recreational divers including the subcategory technical divers, and professional divers which includes military, commercial, public safety and scientific divers.

Depending on the jurisdiction, there will generally be specific published codes of practice and guidelines for training, competence and registration of diving instructors, as they have a duty of care to their clients, and operate in an environment with intrinsic hazards which may be unfamiliar to the lay person. Training and assessment will generally follow a diver training standard, and may use a diver training manual as source material.

Recreational diving instructors are usually registered members of one or more recreational diver certification agencies, and are generally registered to train and assess divers against specified certification standards. Originally these standards were at the discretion of each training and certification agency, but inter-agency and international standards now exist to ensure that the basic skills required for acceptable safety are included as a minimum standard for both instructors and recreational divers. Military diving instructors are generally members of the armed force for which they train personnel. Commercial diving instructors may be required to register with national government appointed organisations, and comply with specific training and assessment standards, but there may be other requirements in some parts of the world. (Full article...)

This article lists notable underwater diver certification agencies. These include certification in cave diving, commercial diving, recreational diving, technical diving and freediving. Diver certification agencies are organisations which issue certification of competence in diving skills under their own name, and which train, assess, certify and register the instructors licensed to present courses following the standards for the certification they issue. (Full article...)

The Health and Safety Executive (HSE) is a British public body responsible for the encouragement, regulation and enforcement of workplace health, safety and welfare. It has additionally adopted a research role into occupational risks in the United Kingdom. It is a non-departmental public body with its headquarters in Bootle, England. In Northern Ireland, these duties lie with the Health and Safety Executive for Northern Ireland. The HSE was created by the Health and Safety at Work etc. Act 1974, and has since absorbed earlier regulatory bodies such as the Factory Inspectorate and the Railway Inspectorate though the Railway Inspectorate was transferred to the Office of Rail and Road in April 2006. The HSE is sponsored by the Department for Work and Pensions. As part of its work, HSE investigates industrial accidents, small and large, including major incidents such as the explosion and fire at Buncefield in 2005. Though it formerly reported to the Health and Safety Commission, on 1 April 2008, the two bodies merged. (Full article...)

Divers Institute of Technology (DIT) is a private, for-profit educational institution for the training of commercial divers and located in Seattle, Washington. Founded in 1968 in Seattle, Washington, Divers Institute of Technology is located on the North end of Lake Union near Gas Works Park in the Wallingford district.

The seven-month program consists of 900 hours, including dive time. There are twelve classes per calendar year, with a new class starting each month. From July 1, 2006, to June 30, 2007, the average number of students per class was 23, with a retention rate of 90%. It is estimated that 10% of the students are women.

Divers Institute is one of only two dive schools in the U.S. to grant students the Canadian Standards Association Unrestricted Surface Supplied Air Diver Certification, issued by the Diver Certification Board of Canada, allowing graduates to dive internationally. (Full article...)

Global Underwater Explorers (GUE) is a scuba diving organization that provides education within recreational, technical, and cave diving. It is a nonprofit membership organization based in High Springs, Florida, United States.

GUE was formed by Jarrod Jablonski and gained early prominence in association with the success of its well-known Woodville Karst Plain Project (WKPP), which now has the status of a nonprofit affiliate of GUE. Jablonski, the president of GUE, promoted the ideas of "Hogarthian" gear configuration attributed to William Hogarth Main, and the "Doing It Right" (DIR) system of diving, to a global audience. Following the WKPP's introduction in 1995 of a standardized approach to gear configuration and diving procedures, there was a significant reduction in diving incidents within the Woodville Karst Plain cave system.

The standardized approach is the basis of the diver training program of GUE, marking an important difference from the programs of other recreational diver training organizations. GUE also focuses on protecting the maritime environment. The most popular GUE course is GUE Fundamentals, which is designed to introduce the GUE system to non-GUE divers and is the pathway to technical courses. Further courses are offered in recreational, technical, and cave diving, as well as instructor courses. (Full article...)

The Professional Diving Instructors Corporation (PDIC) is an international SCUBA training and certification agency. It has an estimated 5 million active recreational divers.

Founded in 1969, PDIC was established out of the need to properly train SCUBA instructors.
After more than ten years of training exclusively instructors, the decision was made to offer training starting at the open water level.

PDIC is a founding member of the (United States) Recreational Scuba Training Council and is recognised as a scuba training and certification provider by several state and national organisations in the USA. (Full article...)

A divemaster (DM) is a role that includes organising and leading recreational dives, particularly in a professional capacity, and is a qualification used in many parts of the world in recreational scuba diving for a diver who has supervisory responsibility for a group of divers and as a dive guide. As well as being a generic term, 'Divemaster' is the title of the first professional rating of many training agencies, such as PADI, SSI, SDI, NASE, except NAUI, which rates a NAUI Divemaster under a NAUI Instructor but above a NAUI Assistant Instructor. The divemaster certification is generally equivalent to the requirements of ISO 24801-3 Dive Leader.

The BSAC recognizes several agencies' divemaster certificates as equivalent to BSAC Dive Leader, but not to BSAC Advanced Diver. The converse may not be true.

The certification is a prerequisite for training as an instructor in recreational diving with the professional agencies except NAUI, where it is an optional step, because of the different position of the NAUI Divemaster in the NAUI hierarchy. (Full article...)

The International Diving Regulators and Certifiers Forum (IDRCF) is an organisation representing a group of national regulatory and certifying bodies for occupational diving, and other interested and affected parties. The IDRCF confirmed its principles and purpose at their meeting in London in September 2009. The statement of principles and purpose states “The forum has agreed to work together towards mutual recognition to identify and implement best practice in diver training and assessment with the objective of harmonising cross-border diver training outside Europe.”

The organisation has since changed its name to International Diving Regulators and Certifiers Forum (IDRCF) (Full article...)

This article lists notable underwater diver certification agencies. These include certification in cave diving, commercial diving, recreational diving, technical diving and freediving. Diver certification agencies are organisations which issue certification of competence in diving skills under their own name, and which train, assess, certify and register the instructors licensed to present courses following the standards for the certification they issue. (Full article...)

International Marine Contractors Association (IMCA) is a leading international trade association for the marine contracting industry. It is a not for profit organisation with members representing the majority of worldwide marine contractors in the oil and gas and renewable energy industries.

IMCA was formed following the merger of the Association of Offshore Diving Contractors (AODC) with the Dynamically Positioned Vessel Owners Association (DPVOA) in 1995. (Full article...)

The Israeli Diving Federation (Hebrew: ההתאחדות הישראלית לצלילה, Hitahdut Haisraelit Letslila) (TIDF) is a non-governmental SCUBA diving training organization based in Israel.

The Israeli Diving Federation is active in varied fields. To date it has scuttled 10 vessels to serve as dive sites, and has contributed to the creation of various other dive sites such as submerged underwater archaeological theme parks, the Sculpture Garden in Eilat, and more. TIDF is active in various “green” bodies dedicated to conservation of the underwater environment, the Coral Reef, and natural as well as man-made dive sites along the coasts of Israel.  

The Israeli Diving Federation certifications are respected and recognized worldwide - TIDF obtained CEN certification from the EUF certification body. (Full article...)

Cave-diving is underwater diving in water-filled caves. It may be done as an extreme sport, a way of exploring flooded caves for scientific investigation, or for the search for and recovery of divers or, as in the 2018 Thai cave rescue, other cave users. The equipment used varies depending on the circumstances, and ranges from breath hold to surface supplied, but almost all cave-diving is done using scuba equipment, often in specialised configurations with redundancies such as sidemount or backmounted twinset. Recreational cave-diving is generally considered to be a type of technical diving due to the lack of a free surface during large parts of the dive, and often involves planned decompression stops. A distinction is made by recreational diver training agencies between cave-diving and cavern-diving, where cavern diving is deemed to be diving in those parts of a cave where the exit to open water can be seen by natural light. An arbitrary distance limit to the open water surface may also be specified.

Equipment, procedures, and the requisite skills have been developed to reduce the risk of becoming lost in a flooded cave, and consequently drowning when the breathing gas supply runs out. The equipment aspect largely involves the provision of an adequate breathing gas supply to cover reasonably foreseeable contingencies, redundant dive lights and other safety critical equipment, and the use of a continuous guideline leading the divers back out of the overhead environment. The skills and procedures include effective management of the equipment, and procedures to recover from foreseeable contingencies and emergencies, both by individual divers, and by the teams that dive together.

In the United Kingdom, cave-diving developed from the locally more common activity of caving. Its origins in the United States are more closely associated with recreational scuba diving. Compared to caving and scuba diving, there are relatively few practitioners of cave-diving. This is due in part to the specialized equipment and skill sets required, and in part because of the high potential risks due to the specific environment.

Despite these risks, water-filled caves attract scuba divers, cavers, and speleologists due to their often unexplored nature, and present divers with a technical diving challenge. Underwater caves have a wide range of physical features, and can contain fauna not found elsewhere. Several organisations dedicated to cave diving safety and exploration exist, and several agencies provide specialised training in the skills and procedures considered necessary for acceptable safety. (Full article...)

The United Diving Instructors (UDI) is the diver training organization founded in 1983 by Z. Fisher and H. G. Golzing in California, United States. (Full article...)

Dive RAID International (formerly RAID) is a dive training organization which was founded in 2007 to support diver training for the Poseidon Mk VI Discovery Rebreather. It has since extended its scope to include open circuit scuba training and training for both recreational and technical diving sectors as well as snorkeling and freediving. (Full article...)

The Australian Underwater Federation (AUF) is the governing body for underwater sports in Australia. (Full article...)

Divers Alert Network (DAN) is a group of not-for-profit organizations dedicated to improving diving safety for all divers. It was founded in Durham, North Carolina, United States, in 1980 at Duke University providing 24/7 telephonic hot-line diving medical assistance. Since then the organization has expanded globally and now has independent regional organizations in North America, Europe, Japan, Asia-Pacific and Southern Africa.

The DAN group of organizations provide similar services, some only to members, and others to any person on request. Member services usually include a diving accident hot-line, and diving accident and travel insurance. Services to the general public usually include diving medical advice and training in first aid for diving accidents. DAN America and DAN Europe maintain databases on diving accidents, treatment and fatalities, and crowd-sourced databases on dive profiles uploaded by volunteers which are used for ongoing research programmes. They publish research results and collaborate with other organizations on projects of common interest. (Full article...)

Green Fins is an approach to sustainable marine tourism activities operating in Southeast Asia, Caribbean and the Indian Ocean that works with business operators, communities and governments. It helps to implement environmental standards for the diving and snorkelling industry through a code of conduct. The overall aim of the initiative is to mitigate damaging impacts to the marine environment from the marine tourism sector and improve sustainability. The code of conduct is a set of 15 points designed to tackle the most common and detrimental effects of scuba diving and snorkelling activities on the habitat in which they operate. (Full article...)

National Board of Diving and Hyperbaric Medical Technology (NBDHMT), formally known as the National Association of Diving Technicians, is a non-profit organization devoted to the education and certification of qualified personnel in the fields of diving and hyperbaric medicine. (Full article...)

DDRC Healthcare is a not-for-profit organization and a registered UK charity (no. 279652) based in Plymouth in the United Kingdom. They offer global services relating to diving medicine.

The organisation employs approximately 60 staff (2023) as regular employees and contracted staff. The organization was established in 1980 at Fort Bovisand in Devon, England - to research the effects of underwater diving on human physiology. (Full article...)

The Artificial Reef Society of British Columbia (ARSBC) is a registered non-profit society based in Vancouver, British Columbia (BC), and has been a registered tax-deductible charity in Canada since 1992.
Its aim is to create environmentally and economically sustainable artificial reefs (ARs) in British Columbia and around the world for the protection and enhancement of sensitive marine habitats, while also providing interesting destinations for the enjoyment of scuba divers.

The Society operates without any paid employees. Instead, it is driven by a dedicated volunteer Board of Directors alongside hundreds of volunteers hailing from British Columbia, Alberta, and the northwest United States, all actively involved in its projects, and is based out of the Vancouver Maritime Museum.

Since its founding in 1991, eight ships and one Boeing 737 have been sunk off the west coast of BC. These wreckages act as a safe starting point for creating additional biodiversity, similar to ship graveyards, and other man-made structures that became ARs without the toxic leaching hazardous materials such as paints and heavy metals.

The Artificial Reef Society of BC claims to also be a member of the Association of British Columbia Marine Industries, however, they are not currently listed as one of the members on the ABCMI member directory. (Full article...)

The Diving Medical Advisory Council (DMAC) is an independent organisation of diving medical specialists, mostly from across Northern Europe which exists to provide expert advice about medical and some safety aspects of commercial diving. The advice is published in the form of guidance documents, which are made available for download.

The committee has also issued position statements on the following subjects:

• Commercial Diving and Health (October 2006)
• Health Surveillance of Commercial Divers (April 2008)
• Exercise Testing in Medical Assessment of Commercial Divers (October 2009)
• Requirement for Air Diving to 50 msw in Commercial Diver Training (March 2013)
• Deep Saturation Diving (April 2013)
• Education and Training in Diving Medicine (November 2014)

(Full article...)

The Naval Submarine Medical Research Laboratory (NSMRL) is located on the New London Submarine Base in Groton, Connecticut. It is a subordinate command of the Naval Medical Research Command. (Full article...)

The Undersea and Hyperbaric Medical Society (UHMS) is an organization based in the US which supports research on matters of hyperbaric medicine and physiology, and provides a certificate of added qualification for physicians with an unrestricted license to practice medicine and for limited licensed practitioners, at the completion of the Program for Advanced Training in Hyperbaric Medicine. They support an extensive library and are a primary source of information for diving and hyperbaric medicine physiology worldwide. (Full article...)

The United States Navy Experimental Diving Unit (NEDU or NAVXDIVINGU) is the primary source of diving and hyperbaric operational guidance for the US Navy. It is located within the Naval Support Activity Panama City in Panama City Beach, Bay County, Florida. (Full article...)

The Aerospace Medical Association (AsMA) is the largest professional organization in the fields of aviation, space, and environmental medicine. The AsMA membership includes aerospace and hyperbaric medical specialists, scientists, flight nurses, physiologists, and researchers from all over the world. (Full article...)

The Nautical Archaeology Society (NAS) is a charity registered in England and Wales and in Scotland and is a company limited by guarantee.

The charitable aims and object of the company are to further research in Nautical Archaeology and publish the results of such research and to advance education and training in the techniques pertaining to the study of Nautical Archaeology for the benefit of the public.

Nautical archaeology is an archaeological sub-discipline more generally known as maritime archaeology. It encompasses the archaeology of shipwrecks, underwater archaeology in seas and elsewhere and the archaeology of related features.

The society's logo is derived from the image of a merchant sailing ship on a Bichrome Ware Cypro-Archaic pottery jug 750-600BC, thought to be from the Karpas Peninsula in North Cyprus. The ancient vessel is part of the British Museum's collection (GR 1926.6-28.9). An analysis of how the iconography on this pot has been misinterpreted in recent history and how the image has been adapted for the society's logo, can be read in the editorial of the society's publication the International Journal of Nautical Archaeology (2000) 29.1: 1–2. (Full article...)

AIDA Hellas (AIDA, from French: Association Internationale pour le Développement de l'Apnée) is a Greek non-profit organization dedicated to the sport of freediving, officially established in 2002. It is the official national representative of AIDA International in Greece, responsible for the representation of Greek freediving community internationally. It aims to the development of freediving in Greece, organizing events like educational seminars and international level sport competitions, every year. Also, it sets standards for the national record attempts and the selection of the members of the national team for AIDA World Championships.

AIDA Hellas is currently supported by more than 100 members in Greece. (Full article...)

Diving equipment, or underwater diving equipment, is equipment used by underwater divers to make diving activities possible, easier, safer and/or more comfortable. This may be equipment primarily intended for this purpose, or equipment intended for other purposes which is found to be suitable for diving use.

The fundamental item of diving equipment used by divers other than freedivers, is underwater breathing apparatus, such as scuba equipment, and surface-supplied diving equipment, but there are other important items of equipment that make diving safer, more convenient or more efficient. Diving equipment used by recreational scuba divers, also known as scuba gear, is mostly personal equipment carried by the diver, but professional divers, particularly when operating in the surface supplied or saturation mode, use a large amount of support equipment not carried by the diver.

Equipment which is used for underwater work or other activities which is not directly related to the activity of diving, or which has not been designed or modified specifically for underwater use by divers is not considered to be diving equipment. (Full article...)

Shadow Divers: The True Adventure of Two Americans Who Risked Everything to Solve One of the Last Mysteries of World War II is a 2004 non-fiction book by Robert Kurson recounting of the discovery of a World War II German U-boat 60 miles (97 km) off the coast of New Jersey, United States in 1991, exploration dives, and its eventual identification as U-869 lost on 11 February 1945. (Full article...)

The Darkness Beckons (ISBN 0-939748-32-0) is a book about the history of UK cave diving by Martyn Farr. It is considered the definitive work on the subject. Farr was a major figure in UK diving at a time when many of the original participants were still alive and available for interview. The first edition of the book was published in 1980. A second edition was published in 1991, followed by a substantially rewritten third edition on 3 July 2017. (Full article...)

The Silent World (subtitle: A story of undersea discovery and adventure, by the first men to swim at record depths with the freedom of fish) is a 1953 book co-authored by Captain Jacques-Yves Cousteau and Frédéric Dumas, and edited by James Dugan. (Full article...)

The Last Dive: A Father and Son's Fatal Descent into the Ocean's Depths (2000) is a non-fiction book written by diver Bernie Chowdhury and published by HarperCollins. It documents the fatal dive of Chris Rouse, Sr. and Chris "Chrissy" Rouse, Jr., a father-son team who perished off the New Jersey coast in 1992. The author is a dive expert and was a friend of the Rouses.

The divers were exploring a German U-boat in 230 feet (70 m) of water off the coast of New Jersey. Although experienced in using technical diving gas mixtures such as "trimix" (adding helium gas to the nitrogen and oxygen found in air), they were diving on just compressed air. The pair had set out to retrieve the captain's log book from the so-called U-Who to "fulfill their dream of diving into fame." The U boat was subsequently identified as U-869.

Chowdhury is a technical diver who, according to writer Neal Matthews' review of Robert Kurson's book Shadow Divers (2004), "was among the first to adapt cave-diving principles to deep-water wrecks". Also according to Matthews, "His book documents how the clashes of equipment philosophy between cave divers and wreck divers mirrored the clash of diving subcultures." (Full article...)

The NOAA Diving Manual: Diving for Science and Technology is a book originally published by the US Department of Commerce for use as training and operational guidance for National Oceanographic and Atmospheric Administration divers. NOAA also publish a Diving Standards and Safety Manual (NDSSM), which describes the minimum safety standards for their diving operations. Several editions of the diving manual have been published, and several editors and authors have contributed over the years. The book is widely used as a reference work by professional and recreational divers. (Full article...)

Goldfinder is a 2001 autobiography of British diver and treasure hunter Keith Jessop. It tells the story of Jessop's life and salvaging such underwater treasures as HMS Edinburgh, one of the greatest deep sea salvage operations and most financially rewarding in history.

One day in April 1981 Jessop's survey ship Dammtor began searching for the wreck of HMS Edinburgh in the Barents Sea in the Arctic Ocean of the coast of Russia. The ship had been sunk in battle in 1942 during World War II while carrying payment for military equipment from Murmansk in Russia to Scotland. His company, called Jessop Marine, won the contract for the salvage rights to the wreck of Edinburgh because his methods, involving complex cutting machinery and divers, were deemed more appropriate for a war grave, compared to the explosives-oriented methods of other companies.

In late April 1981, the survey ship discovered the ship's final resting place at an approximate position of 72.00°N, 35.00°E, at a depth of 245 metres (804 ft) within ten days of the start of the operation. Using specialist camera equipment, Dammtor took detailed film of the wreck, which allowed Jessop and his divers to carefully plan the salvage operation.

Later that year, on 30 August, the dive-support vessel Stephaniturm journeyed to the site, and salvage operations began in earnest. Leading the operation undersea, by mid-September of that year Jessop was able to salvage over $100,000,000 in Russian gold bullion (431 bars) from the wreck out of 465 over several days making him the greatest underwater treasurer in history.

Jessop died on 22 May 2010. (Full article...)