PowerSwim

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "PowerSwim" – news · newspapers · books · scholar · JSTOR (January 2010) (Learn how and when to remove this message)

The PowerSwim is a diver powered propulsion comprising two pairs of high aspect ratio hydrofoils in a device somewhat like two pairs of long thin airplane wings, one pair at each end of an axis. The axis is fastened to a scuba diver's shins by straps round the legs. The longer pair of wings (about 6 feet (1.8 m) wide or a bit less) is at the hips and the shorter pair is at the ankles. The wings rotate to a limited angle on axles near their front edges, and thus on upstroke and downstroke they propel water backwards. It is claimed that the length of the front wing lets it operate outside the cone of wake that starts at the diver's shoulders. It is claimed to let a scuba diver or swim much faster (250%) than with swimfins for the same amount of bodily effort, if used correctly, and being not motorized, it makes no motor noise to be heard by hostile hydrophones, but noise would occur if the front wings are allowed to hit the diver's hips at end of upstroke.^{[clarification needed]} It works somewhat like a penguin's or turtle's front flippers. Its estimated cost is less than $500. The diver uses it by moving his legs up and down together, letting the knees bend and straighten.^{[citation needed]}

It was developed by DARPA in 2007.^{[citation needed]}