 | |||
| Type | Bus | ||
|---|---|---|---|
| Production history | |||
| Designer | Team led by Larry Boucher at Shugart Associates | ||
| Designed | September 1981[1] | ||
| Standardized | ANSI X3.131-1986, June 1986 | ||
| Produced | Since 1983 | ||
Small Computer System Interface (SCSI, /ˈskʌzi/ SKUZ-ee)[2] is a set of standards for physically connecting and transferring data between computers and peripheral devices, best known for its use with storage devices such as hard disk drives. SCSI was introduced in the 1980s and has seen widespread use on servers and high-end workstations, with new SCSI standards being published as recently as SAS-4 in 2017.
The SCSI standards define commands, protocols, electrical, optical and logical interfaces. The SCSI standard defines command sets for specific peripheral device types; the presence of "unknown" as one of these types means that in theory it can be used as an interface to almost any device, but the standard is highly pragmatic and addressed toward commercial requirements. The initial Parallel SCSI was most commonly used for hard disk drives and tape drives, but it can connect a wide range of other devices, including scanners and CD drives, although not all controllers can handle all devices.
The ancestral SCSI standard, X3.131-1986, generally referred to as SCSI-1, was published by the X3T9 technical committee of the American National Standards Institute (ANSI) in 1986. SCSI-2 was published in August 1990 as X3.T9.2/86-109, with further revisions in 1994 and subsequent adoption of a multitude of interfaces. Further refinements have resulted in improvements in performance and support for ever-increasing data storage capacity.[3]
- ^ Cite error: The named reference
draftwas invoked but never defined (see the help page). - ^ Field. The Book of SCSI. p. 1.
- ^ "ANSI INCITS 131 94th Edition, 2004". global.ihs.com. Retrieved April 25, 2017.