 | This article needs additional citations for verification. (October 2024) |
 The STR13, driven by Pierre Gasly, during the Austrian Grand Prix | |||||||||||
| Category | Formula One | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Constructor | Scuderia Toro Rosso | ||||||||||
| Designer(s) | James Key (Technical Director) Jody Egginton (Deputy Technical Director) Paolo Marabini (Head of Structural Design) Mark Tatham (Head of Mechanical Design) Brendan Gilhome (Head of Aerodynamics) | ||||||||||
| Predecessor | Toro Rosso STR12 | ||||||||||
| Successor | Scuderia Toro Rosso STR14 | ||||||||||
| Technical specifications[1][2] | |||||||||||
| Chassis | Carbon-fibre monocoque with honeycomb structure and Halo safety cockpit protection | ||||||||||
| Suspension (front) | Upper and lower carbon wishbones, pushrod, torsion bar springs, anti roll bars. ZF Sachs dampers and springs | ||||||||||
| Suspension (rear) | Upper and lower carbon wishbones, pullrod, torsion bar springs, anti roll bars. ZF Sachs dampers and springs | ||||||||||
| Length | 5,420 mm (213 in) including rear wing | ||||||||||
| Width | 2,000 mm (79 in) | ||||||||||
| Height | 950 mm (37 in) | ||||||||||
| Wheelbase | 3,700 mm (146 in) | ||||||||||
| Engine | Honda RA618H 1.6 L (98 cu in) direct injection V6 turbocharged engine limited to 15,000 rpm in a mid-mounted, rear-wheel drive layout | ||||||||||
| Electric motor | Honda kinetic and thermal energy recovery systems | ||||||||||
| Transmission | Red Bull Technology 8-speed + 1 reverse sequential semi-automatic, longitudinally mounted with hydraulic system for power shift and clutch operation | ||||||||||
| Battery | Honda Racing F1 lithium-ion | ||||||||||
| Weight | 734 kg (1,618 lb) including driver | ||||||||||
| Fuel | Petronas Primax | ||||||||||
| Lubricants | Petronas Syntium | ||||||||||
| Brakes | Brembo brake-by-wire system with 6-piston calipers, carbon discs and pads | ||||||||||
| Tyres | Pirelli P Zero (dry) Pirelli Cinturato (wet) APP-Tech forged magnesium wheels: 13" | ||||||||||
| Clutch | ZF Sachs hydraulically-activated carbon multiplate | ||||||||||
| Competition history | |||||||||||
| Notable entrants | Red Bull Toro Rosso Honda | ||||||||||
| Notable drivers |
| ||||||||||
| Debut | 2018 Australian Grand Prix | ||||||||||
| Last event | 2018 Abu Dhabi Grand Prix | ||||||||||
| |||||||||||
The Scuderia Toro Rosso STR13 is a Formula One racing car designed and constructed by Scuderia Toro Rosso to compete in the 2018 FIA Formula One World Championship. The car was driven by Pierre Gasly and Brendon Hartley, both of whom were retained by the team after contesting selected events in 2017.[3] The STR13 made its competitive début at the 2018 Australian Grand Prix and is the first car built by Scuderia Toro Rosso to use a Honda engine after the team agreed to end its engine partnership deal with Renault to allow the French manufacturer to partner McLaren.[4]
- ^ "STR13". Scuderia Toro Rosso. 14 February 2018. Archived from the original on 2 March 2018. Retrieved 15 February 2018.
- ^ Mitchell, Scott (12 November 2017). "Pirelli to introduce new softest-compound pink-walled F1 tyre in '18". Autosport. Motorsport Network. Archived from the original on 13 November 2017.
- ^ "2018 FIA Formula One World Championship Entry List". fia.com. Fédération Internationale de l'Automobile. 4 December 2017. Archived from the original on 5 December 2017.
- ^ "Scuderia Toro Rosso to join forces with Honda". Scuderia Toro Rosso. 15 September 2017. Archived from the original on 15 September 2017.