The shear strength of a discontinuity in a soil or rock mass may have a strong impact on the mechanical behavior of a soil or rock mass.[1][2][3][4][5][6] The shear strength of a discontinuity is often considerably lower than the shear strength of the blocks of intact material in between the discontinuities, and therefore influences, for example, tunnel, foundation, or slope engineering, but also the stability of natural slopes. Many slopes, natural and man-made, fail due to a low shear strength of discontinuities in the soil or rock mass in the slope. The deformation characteristics of a soil or rock mass are also influenced by the shear strength of the discontinuities. For example, the modulus of deformation is reduced, and the deformation becomes plastic (i.e. non-reversible deformation on reduction of stress) rather than elastic (i.e. reversible deformation). This may cause, for example, larger settlement of foundations, which is also permanent even if the load is only temporary. Furthermore, the shear strength of discontinuities influences the stress distribution in a soil or rock mass.[7]
hoekbray1974
was invoked but never defined (see the help page).hoekbrown1990
was invoked but never defined (see the help page).Hack1998
was invoked but never defined (see the help page).ISRMbluebook2007
was invoked but never defined (see the help page).Price2009
was invoked but never defined (see the help page).Hencheretal2011
was invoked but never defined (see the help page).GazievErlikhman1971
was invoked but never defined (see the help page).