Uses | Towed diver search or survey |
---|---|
Related items | Diver propulsion vehicle |
A towboard is a piece of aquatic survey equipment consisting of a board attached to a rope that is towed by a surface vessel. It is used to tow one or more divers underwater at a constant depth to survey bottom features such as coral reefs. The diver may use a scuba set, or if only a snorkel, may remain at the surface, or travel underwater for around two minutes.[1]
The towing vessel travels at approximately 1 to 2 miles per hour and may tow two divers, one with a camera pointing down, and other with a camera facing forward. The boat follows a depth contour to keep the towboard over a specific depth. The divers can also maneuver the board to maintain a more precise depth and avoid obstacles. A survey may cover up to nearly 2 miles over a period of around 50 minutes.
This type of surveying method is called a towboard survey, towed-diver survey,[2] and the manta tow technique, the latter named after the Manta Board, an oval towboard marketed for recreational use.[3][1] A variant is the SAM or "Single-armed Manta-board". This consists of a small board with a strap to secure and tow the diver by the forearm. This frees the other arm, allowing the diver to take notes on a pad held by the towing arm.[4]
The use of a towboard is considered safe for NOAA reef surveys by trained divers at depths where no decompression stops are required (down to approximately 90 feet).[5]
Towboards may be equipped with sensors to record the temperature and depth every few seconds and the tow vessel may have a GPS to record position. Position of the diver is approximate and must be calculated from the boat position, heading and towline length.[5][6][7]
{{cite web}}
: CS1 maint: unfit URL (link)