Universal rule

This article has an unclear citation style. The references used may be made clearer with a different or consistent style of citation and footnoting. (June 2014) (Learn how and when to remove this message)

The Universal Rule (Universal Rule for Yachts) determined a yacht's eligibility to race in the America's Cup from 1914 to 1937 and for this the J-class was chosen. Boats built according to the rule reached their peak in the large J-class yachts. This Rating Rule is intended to calculate a rating for yachts, which can then be used to calculate its Time Correction Factor (T.C.F.) in order to have disparate yachts racing against each other. The first boat said to be built under the universal rule was Nathanael Greene Herreshoff's Doris built in 1905.

Before 1914, the Seawanhaka Rule was used for America's Cup racing, and after 1937 smaller boats were desirable, and so the International Rule gained popularity in the 12-Metre Class and smaller to the detriment of the M-class and smaller and became the standard. The 6, 8 and 12 Metre Classes and from 1948 on the 5.5 Metre, were the most popular and the 12-Metre was used for the America's Cup until 1987, the last year the America's Cup was sailed in 12-meter yachts.

Yacht designer Nathanael Herreshoff devised the rule in 1902 "Herreshoff Rule" and accepted by the New York Yacht Club as the rule-making body for 1903.^[1][2] Herreshoff had designed winning America's Cup yachts which fully exploited the Seawanhaka rule, which was based only on a yacht's upright waterline length and sail area, to create narrow boats with long overhangs. This reached its peak with Reliance, the defender of the 1903 America's Cup, which was described as a "racing freak", suitable only for certain conditions.^[3] This prompted Herreshoff to propose a rule which also took into account the displacement of the boat.^[4]