User:Wesleyh12/Ip-485


IP-485 LF Bus (Low Frequency)
Technology IP-485
Standard EIA-485
Physical Media Twisted Pair Wiring
Type Two Wire (Standard) or Four Wire
Network Topology Point-to-point, Multi-dropped, Multi-point
Maximum Distance 1200 meters (4000 feet)
Maximum Devices 32
Mode of Operation Differential
Maximum Baud Rate 100 kbit/s - 10 Mbit/s
Voltage Levels -5 V to +5 V (max)
Available Signals Half Duplex/Full Duplex
IP-485 BB Bus (High Frequency Broadband)
Technology IP-485
Standard IEEE 802.3
Physical Media Twisted Pair Wiring
Type Two Wire (Standard) or Four Wire
Network Topology Point-to-point, Multi-dropped, Multi-point
Variant 10Base-T
Maximum Distance Spec 350 ft up to LRE equivalence
Mode of Operation Differential (Balanced)
Bit Rates 4 Mbps Average (Bursts up to 20 Mbps)
Voltage Levels +/- 2.5 Volts (Over twisted pair)
Available Signals Half Duplex/Full Duplex
Supports Internet Protocol Suite (Application Layer, Transport Layer, Internet Layer, Link Layer)
Transport Connection Multi-port Ethernet Connection Module (Physical Connection on IP-485 Module transported over BB Bus) BB Bus Transport mechanism for IP enabled Protocols

IP-485 is an open standard communication technology that allows users of existing twisted pair networks to expand and update existing serial data buses to simultaneously transport both Ethernet and RS-485, RS-422, RS-232, Modbus serial, or other serial data on the same twisted pair wiring without running Point-to-Point CAT5/6 wiring.