10"/31 caliber Mark 1 Mod 1/ 10"/35 caliber Mark 1 Mod 2/ 10"/30 caliber Mark 2 Naval Gun | |
---|---|
Type | Naval gun |
Place of origin | United States |
Service history | |
In service | 1890 |
Used by | United States Navy |
Wars | |
Production history | |
Designer | Bureau of Ordnance |
Designed | 1885 |
Manufacturer | U.S. Naval Gun Factory |
Unit cost | $38,566.58[1] |
Variants | Mark 1 Mod 1, Mark 1 Mod 2 and Mark 2 |
Specifications | |
Mass |
|
Length |
|
Barrel length |
|
Shell | 510 lb (230 kg) armor-piercing |
Caliber | 10 in (254 mm) |
Elevation |
|
Traverse | −150° to +150° |
Rate of fire |
|
Muzzle velocity | 2,000 ft/s (610 m/s) |
Effective firing range | 20,000 yd (18,000 m) at 15° elevation |
The 10"/31 caliber gun Mark 1 Mod 1 (spoken "ten-inch-thirty-one--caliber") and the 10"/35 caliber gun Mark 1 Mod 2 were both used for the primary batteries of the United States Navy's Amphitrite-class monitor Miantonomoh. The 10"/30 caliber gun Mark 2 was used as main armament on the remaining Amphitrite-class monitors, the monitor Monterey, and the armored cruiser Maine.[2]
The Navy's Policy Board called for a variety of large caliber weapons in 1890, with ranges all the way up to 16-inch (406 mm). This 10-inch (254 mm) gun had been in development since 1885. The Navy desired a light weight heavy weapon with a 10-inch bore to arm their coastal monitors and the armored cruiser Maine, which would later be classified a "Second Class Battleship." The 10-inch/31 caliber gun would be the first heavy breech loader (BL) gun in the "New Navy" and be the ancestor to all large caliber BL guns built in the United States.[2]