8mm Remington Magnum

8mm Remington Magnum
8mm Remington Magnum (center) with .308 Winchester (left) and .375 H&H Magnum (right).
TypeRifle
Place of originUnited States
Service history
In serviceNever issued
Production history
DesignerRemington Arms Company
Designed1978
ManufacturerRemington
Produced1978–present
Specifications
Parent case.375 H&H Magnum
Case typeBelted, bottleneck
Bullet diameter.323 in (8.2 mm)
Neck diameter.355 in (9.0 mm)
Shoulder diameter.487 in (12.4 mm)
Base diameter.513 in (13.0 mm)
Rim diameter.532 in (13.5 mm)
Rim thickness.050 in (1.3 mm)
Case length2.850 in (72.4 mm)
Overall length3.600 in (91.4 mm)
Case capacity99.0 gr H2O (6.42 cm3)
Rifling twist1 in 10 (1 in 254 mm)
Primer typeLarge Rifle
Maximum pressure (C.I.P.)63,817 psi (440.00 MPa)
Maximum pressure (SAAMI)65,000.0 psi (448.159 MPa)
Ballistic performance
Bullet mass/type Velocity Energy
200 gr (13 g) Partition type 2,900 ft/s (880 m/s) 3,734 ft⋅lbf (5,063 J)
200 gr (13 g) Bonded 3,050 ft/s (930 m/s) 4,132 ft⋅lbf (5,602 J)
180 gr (12 g) Protected point 3,210 ft/s (980 m/s) 4,119 ft⋅lbf (5,585 J)
180 gr (12 g) Polymer tipped 3,315 ft/s (1,010 m/s) 4,394 ft⋅lbf (5,957 J)
220 gr (14 g) Soft Point 2,965 ft/s (904 m/s) 4,296 ft⋅lbf (5,825 J)
Test barrel length: 22 in (56 cm) 24 in (61 cm) and 26 in (66 cm)
Source(s): Remington [1] / Nosler [2]/Sierra

The 8mm Remington Magnum belted rifle cartridge was introduced by Remington Arms Company in 1978 as a new chambering for the model 700 BDL rifle. The 8mm Remington Magnum's parent case is the .375 H&H Magnum. It is a very long and powerful cartridge that cannot be used in standard length actions, such as those that accommodate the .30-06 Springfield.[3]

  1. ^ "Remington". Archived from the original on 2007-03-29. Retrieved 2007-03-29.
  2. ^ "Nosler". Archived from the original on 2009-04-22. Retrieved 2018-09-27.
  3. ^ "8mm Rem data from Accurate Powder" (PDF). Archived from the original (PDF) on 2008-10-06. Retrieved 2007-08-20.