Abbotsford Bridge

Abbotsford Bridge
Abbotsford Bridge from the Victorian riverbank
Coordinates	34°06′51″S 141°59′16″E / 34.1141°S 141.9879°E / -34.1141; 141.9879
Carries	Silver City Highway (as Calder Highway)
Crosses	Murray River
Locale	Curlwaa, New South Wales, Australia
Preceded by	George Chaffey Bridge
Followed by	Paringa Bridge
Characteristics
Design	Allan truss vertical-lift bridge
Material	Steel
Total length	Approx. 240 m (790 ft)
Clearance below	7.1 m (23.3 ft) (closed) 16.0 m (52.5 ft) (open)
No. of lanes	One (controlled by traffic lights)
History
Constructed by	NSW Department of Public Works
Construction cost	A£78,000
Opened	14 April 1928 (1928-04-14)
Inaugurated	28 July 1928 (1928-07-28) (by Dudley de Chair, Governor of NSW)
Replaces	Abbot's Ford punt
Location
References
[1][2][3][4]

Abbotsford Bridge is a steel Allan truss-type road bridge that carries the Silver City Highway across the Murray River, between Curlwaa in New South Wales, and Yelta in Victoria, Australia. It is the only remaining steel truss bridge with a lift span that crosses the Murray. Opened in 1928, the bridge was built by the NSW Department of Public Works and was designed by Percy Allan. It was the second last vertical-lift bridge to be built over the river, the last being the Nyah Bridge, which opened in 1941.^[5]

The bridge was constructed over a three-year period from 1925. The project was not originally planned to take as long, but there were delays due to problems with a contractor, and industrial action. The bridge was designed to carry the Mildura railway line over the Murray River and into New South Wales, to service significant cross-border traffic arising from the fruit-growing industry, but the line was never extended beyond the terminus at Yelta. The bridge currently carries a single lane of road controlled by traffic lights.

In 1931, there was a major accident at the bridge when a paddle steamer clipped the lift span, tearing apart the upper deck of the boat.