Aire and Calder Navigation

Aire and Calder Navigation
One of the 600 tonne barges used on the Navigation
Map
Specifications
Length34 miles (55 km)
Maximum boat length200 ft 0 in (60.96 m)
(originally 58 ft 0 in or 17.68 m)
Maximum boat beam20 ft 0 in (6.10 m)
(originally 14 ft 6 in or 4.42 m)
Locks16
StatusOpen
Navigation authorityCanal and River Trust
History
Original ownerAire and Calder Navigation Company
Principal engineerJohn Hadley
Date of act1699
Date of first use1704
Geography
Start pointLeeds (Aire) and Wakefield (Calder)
End pointGoole Docks
Map

The Aire and Calder Navigation is the canalised section of the Rivers Aire and Calder in West Yorkshire, England. The first improvements to the rivers above Knottingley were completed in 1704 when the Aire was made navigable to Leeds and the Calder to Wakefield, by the construction of 16 locks. Lock sizes were increased several times, as was the depth of water, to enable larger boats to use the system. The Aire below Haddlesey was bypassed by the opening of the Selby Canal in 1778. A canal from Knottingley to the new docks and new town at Goole provided a much shorter route to the River Ouse from 1826. The New Junction Canal was constructed in 1905, to link the system to the River Don Navigation, by then part of the Sheffield and South Yorkshire Navigation.

Steam tugs were introduced in 1831. In the 1860s, compartment boats were introduced, later called Tom Puddings, from which coal was unloaded into ships by large hydraulic hoists. This system enabled the canal to carry at its peak more than 1.5 million tons of coal per year, and was not abandoned until 1986. To handle trains of compartments, many of the locks were lengthened to 450 feet (140 m).

Although much of the upper reaches are now designated as leisure routes, there is still significant commercial traffic on the navigation. 300,000 tons were carried in 2007, although most of the traffic is now petroleum and gravel, rather than the coal which kept the navigation profitable for 150 years.