Alexander Dennis Enviro300

Alexander Dennis Enviro300
Buses of Somerset second generation Alexander Dennis Enviro300 in Minehead in May 2018
Overview
ManufacturerTransBus International/ Alexander Dennis
Production2001–2008 (1st generation)
2007–2015 (2nd generation)
AssemblyFalkirk, Scotland
Body and chassis
Doors1
Floor typeLow floor
Low entry
ChassisAlexander Dennis Enviro300
MAN 18.240 and 18.250
Volvo B7RLE
Scania K230UB
RelatedEnviro200, Enviro350H, Enviro400, Enviro500
Powertrain
EngineCummins ISBe (Enviro 300/MAN 18.240 retrofits)
MAN D0836 (MAN 18.240)
Volvo D7E (Volvo B7RLE)
Scania DC9/OC9 (Scania K230UB)
Capacity43 to 80 seated
Power output185–250 hp (136–184 kW)
TransmissionZF Ecomat/EcoLife
Voith DIWA
Allison
Dimensions
Length11.8–12.8 m (38 ft 9 in – 42 ft 0 in)
Width2.54 m (8 ft 4 in)
Curb weight14.4–18 t (14.2–17.7 long tons; 15.9–19.8 short tons)
Chronology
PredecessorBody: Alexander ALX300
Chassis: Dennis Lance
SuccessorAlexander Dennis Enviro200 MMC

The Alexander Dennis Enviro300 (previously known as the TransBus Enviro300) is a light-weight full-size single-decker bus that was built by Alexander Dennis and its predecessor TransBus International between 2001 and 2015. The design was the first of the new Enviro range of buses from TransBus and also the first bus to be built as an integral bus by TransBus.

The Enviro300 was introduced in order to fill a gap in the manufacturer's product range. At the beginning the Cummins ISBe220 5.9-litre Euro III engine was provided as standard, but for Euro IV and V, the engine was the 6.7-litre ISBe with 225 hp for Euro IV and 225 or 250 hp for Euro V. There was a choice of 3 gearboxes: ZF Ecomat (originally 5HP502C, then 6HP504C), Allison T280R and Voith DIWA 854.5 (originally DIWA854.3E). The second generation Enviro300, with front end redesigned to match the Enviro200 and Enviro400, was launched in 2007.

Production of the Enviro300 ceased in 2015 with the introduction of a long-wheelbase Enviro200 MMC.