Antimony trifluoride

Antimony trifluoride
Structural formula
Structural formula
space-filling model
space-filling model
Unit cell
Unit cell
Unit cell of antimony trifluoride. The distorted-octahedral coordination of the fluorine relative to the antimony is visualized.
Unit cell of antimony trifluoride. The distorted-octahedral coordination of the fluorine relative to the antimony is visualized.
Names
Preferred IUPAC name
Antimony(III) fluoride
Systematic IUPAC name
Trifluorostibane
Other names
Trifluoroantimony
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.029.099 Edit this at Wikidata
EC Number
  • 232-009-2
RTECS number
  • CC5150000
UNII
UN number UN 2923
  • InChI=1S/3FH.Sb/h3*1H;/q;;;+3/p-3 checkY
    Key: GUNJVIDCYZYFGV-UHFFFAOYSA-K checkY
  • InChI=1S/3FH.Sb/h3*1H;/q;;;+3/p-3
    Key: GUNJVIDCYZYFGV-UHFFFAOYSA-K
  • InChI=1/3FH.Sb/h3*1H;/q;;;+3/p-3
    Key: GUNJVIDCYZYFGV-DFZHHIFOAW
  • F[Sb](F)F
Properties
SbF3
Molar mass 178.76 g/mol
Appearance light gray to white crystals
Odor pungent
Density 4.379 g/cm3
Melting point 292 °C (558 °F; 565 K)
Boiling point 376 °C (709 °F; 649 K)
385 g/100 mL (0 °C)
443 g/100 mL (20 °C)
562 g/100 mL (30 °C)
Solubility soluble in methanol, acetone
insoluble in ammonia
-46.0·10−6 cm3/mol
Structure
Orthorhombic, oS16
Ama2, No. 40
Hazards
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasFlammability 0: Will not burn. E.g. waterInstability 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code
3
0
0
Lethal dose or concentration (LD, LC):
100 mg/kg
NIOSH (US health exposure limits):
PEL (Permissible)
TWA 0.5 mg/m3 (as Sb)[1]
REL (Recommended)
TWA 0.5 mg/m3 (as Sb)[1]
Related compounds
Related compounds
antimony pentafluoride, antimony trichloride
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

Antimony trifluoride is the inorganic compound with the formula SbF3. Sometimes called Swarts' reagent, it is one of two principal fluorides of antimony, the other being SbF5. It appears as a white solid. As well as some industrial applications,[2] it is used as a reagent in inorganic and organofluorine chemistry.

  1. ^ a b NIOSH Pocket Guide to Chemical Hazards. "#0036". National Institute for Occupational Safety and Health (NIOSH).
  2. ^ Sabina C. Grund, Kunibert Hanusch, Hans J. Breunig, Hans Uwe Wolf "Antimony and Antimony Compounds" in Ullmann's Encyclopedia of Industrial Chemistry, 2006, Wiley-VCH, Weinheim. doi:10.1002/14356007.a03_055.pub2