Avaya Ethernet Routing Switch 5500 Series | |
ERS 5510-48T/5510-24T | |
---|---|
Rack mountable: | 19-inch standard rack |
ERS 5520-48T-PWR/5520-24T-PWR | |
Rack mountable: | 19-inch standard rack |
ERS 5530-24TFD | |
Rack mountable: | 19-inch standard rack |
Certifications | |
JITC'[1] |
The Ethernet Routing Switch 5500 Series or (ERS 5500) is a series of stackable, Layer 3 switches used in computer networking. The ERS 5000 was originally designed by Nortel and is now manufactured by Avaya. Up to 8 ERS 5000 Series Switches may be stacked in a 640 Gbit/s fast stacking configuration.[2][3] This Switch was used as the access layer device for the 2010 Winter Olympics games.[4][5][6] The 817 Access Switches supported 8782 Voice-over-IP telephones.[7]
The Switches have an integrated time-domain reflectometer (TDR) built into every copper port, providing diagnostic monitoring and troubleshooting capabilities of the connected cables allowing for the troubleshooting of cable defects (crimped, cut, shorted or damaged cables) from the telnet, SNMP, web and console management interfaces. This test provides a very reliable test to identify if the cable is good or faulty.[8]
The Switches also include an integrated packet sniffer built into every port that can export the information on to a web page report (see the jpg to the right, an example of top 25 talkers on a switch) or export the information to an IPFIX server. The web base reports will report top 10, 25, or 50 talkers. Reports can also be created and sorted on source address, destination address, TOS, protocol, port number, source or destination ports, packet count, byte count, or first or last packet times. Multiple ports can be monitored simultaneously or individually.[9] A license is not required to enable this function. The Management of the system is accomplished through a serial console (which presents both a menu structure and a command line interface), a web interface or with the device manager tools, which uses SNMP to communicate with the device.