Belpaire firebox

Diagramatic cross section of the Belpaire fire box showing the increased area for evaporation and larger volume of water contained in the square section above the box. The hatched circles show the outline of the barrel to which the firebox was attached.
A Round-topped firebox cross section shown for comparison. Note the angling of the stays.
Pacific-type flat-topped inner firebox

The Belpaire firebox is a type of firebox used on steam locomotives. It was invented by Alfred Belpaire of Belgium in 1864. Today it generally refers to the shape of the outer shell of the firebox which is approximately flat at the top and square in cross-section, indicated by the longitudinal ridges on the top sides. However, it is the similar square cross-section inner firebox which provides the main advantages of this design i.e. it has a greater surface area at the top of the firebox where the heat is greatest, improving heat transfer and steam production, compared with a round-top shape.

The flat firebox top would make supporting it against pressure more difficult (e.g. by means of girders, or stays) compared to a round-top. However, the use of a similarly shaped square outer boiler shell allows simpler perpendicular stays to be used between the shells.[1] The Belpaire outer firebox is, nevertheless, more complicated and expensive to manufacture than a round-top version.

Due to the increased expense involved in manufacturing this boiler shell, just two major US railroads adopted the Belpaire firebox, the Pennsylvania and the Great Northern.[2] In Britain most locomotives employed the design after the 1920s, except notably those of the LNER.

  1. ^ Saunders, Lawrence; Blundstone, S. R. (April 1924). "The Belpaire Firebox". The Railway Engineer. 45: 237. Retrieved 2014-08-22.
  2. ^ William D. Middleton; Rick Morgan; Roberta L. Diehl. 2007. Encyclopedia of North American Railroads. Indiana University Press. p. 1009. ISBN 978-0-253-02799-3.