British Rail Class 01

British Rail Class 01
A Class 01 at Holyhead Breakwater
Type and origin
Power typeDiesel-mechanical
BuilderAndrew Barclay Sons & Co
Serial number395–398, 424
Build date1956 (4), 1958 (1)
Total produced5
Specifications
Configuration:
 • Whyte0-4-0DM
 • UICB-dm
Gauge4 ft 8+12 in (1,435 mm)
Wheel diameter3 ft 2 in (0.965 m)
Minimum curve
Wheelbase6 ft 0 in (1.829 m)
Length23 ft 8 in (7.214 m)
Width8 ft 5+12 in (2.578 m)
Height11 ft 10+12 in (3.620 m)
Loco weight25.05 long tons (25.5 t; 28.1 short tons)
Fuel capacity325 imp gal (1,480 L; 390 US gal)
Prime moverGardner 6L3
RPM:
 • Maximum RPM1,200
Engine type6-cylinder in-line Four-stroke diesel engine
TransmissionMechanical: Wilson SE4, 4-speed epicyclic gear box, Vulcan-Sinclair type 23 rigid hydraulic coupling, to a Wiseman 15LGB reverse and final drive unit.
Loco brakeStraight Air
Train brakes
Performance figures
Maximum speed14.25 mph (22.9 km/h)
Power output
  • Engine: 153 hp (114 kW)
  • At rail: 102 hp (76 kW)
Tractive effort:
 • Continuous12,750 lbf (56.7 kN) at 2.63 mph (4.23 km/h)
Brakeforce15 long tons-force (150 kN)
Career
OperatorsBritish Railways
Numbers
  • 11503–11506, 81 (departmental)
  • later D2953–D2956
  • later 01001–01002
Axle load classRA 1
Withdrawn1966–1968 (except D2954–5), 1981
PreservedD2953, D2956 (1st)
Scrapped1969, 1982
Disposition2 preserved, 3 scrapped

The British Rail Class 01 diesel locomotive is a short wheelbase 0-4-0 diesel-mechanical design intended for use in areas with tight curves and limited clearance.