Burrell Smith

Burrell Smith
Born (1955-12-16) December 16, 1955 (age 68)
NationalityAmerican
OccupationComputer engineer
Known forMacintosh

Burrell Carver Smith (born December 16, 1955) is a retired American computer engineer who created the first wire wrap prototype of the motherboard for the original Macintosh at Apple Computer.[1] He became Apple employee #282 in February 1979 as an Apple II service technician.[2] He designed the motherboard for Apple's LaserWriter.

Smith was working in Apple's service department when he helped Bill Atkinson add more memory to an Apple II computer in an innovative fashion. Atkinson recommended him to Jef Raskin, who, along with Steve Wozniak, was looking for a hardware engineer for their newly formed Macintosh project.[2] As a member of the design team,[3] Smith prototyped five different motherboards using techniques based on Programmable Array Logic (PAL) chips to achieve maximum functionality with a minimal chip count and cost. His signature is molded into the original Macintosh case, along with the signatures of the rest of the Macintosh team.

Smith left the company before the release of Apple's Turbo Mac design platform, with an internal hard drive and a further simplified chipset.

He co-founded Radius Inc.

  1. ^ "Folklore.org: PC Board Esthetics". folklore.org. Retrieved 2024-02-19.
  2. ^ a b Hertzfeld, Andy (November 1979). "We'll See About That". Retrieved March 10, 2019.
  3. ^ Smith, Burrell C. (February 1984). "Macintosh System Architecture". BYTE. p. 32. Retrieved 22 October 2013.