CT pulmonary angiogram

CT pulmonary angiogram
Example of a CTPA, demonstrating a saddle embolus. The white area above the center is the pulmonary artery, opacified by radiocontrast. Inside it, the grey matter is blood clot. The black areas on either side are the lungs, with around it the chest wall.
OPS-301 code3-222

A CT pulmonary angiogram (CTPA) is a medical diagnostic test that employs computed tomography (CT) angiography to obtain an image of the pulmonary arteries. Its main use is to diagnose pulmonary embolism (PE).[1] It is a preferred choice of imaging in the diagnosis of PE due to its minimally invasive nature for the patient, whose only requirement for the scan is an intravenous line.

Modern MDCT (multi-detector CT) scanners are able to deliver images of sufficient resolution within a short time period, such that CTPA has now supplanted previous methods of testing, such as direct pulmonary angiography, as the gold standard for diagnosis of pulmonary embolism.[2]

The patient receives an intravenous injection of an iodine-containing contrast agent at a high rate using an injector pump. Images are acquired with the maximum intensity of radio-opaque contrast in the pulmonary arteries. This can be done using bolus tracking.

A normal CTPA scan will show the contrast filling the pulmonary vessels, appearing as bright white. Any mass filling defects, such as an embolus, will appear dark in place of the contrast, filling/blocking the space where blood should be flowing into the lungs.

  1. ^ Cite error: The named reference Fedullo was invoked but never defined (see the help page).
  2. ^ Apfaltrer P, Hanna EL, Henzler T, Fink C, Schoepf UJ (6 October 2011). "CT Imaging of Pulmonary Embolism: Current Status". Current Cardiovascular Imaging Reports. 4 (6): 476–484. doi:10.1007/s12410-011-9112-6.