Cassington Canal | |
---|---|
Location | Eynsham, Oxfordshire |
Coordinates | 51°47′02″N 1°20′54″W / 51.7839°N 1.3482°W |
Specifications | |
Length | 0.75 miles (1.21 km) |
Maximum boat length | 112 ft 0 in (34.14 m) |
Maximum boat beam | 14 ft 10 in (4.52 m) |
Locks | 1 |
Status | Derelict[3] |
History | |
Construction began | 1800[1][a] |
Date extended | 1802 |
Date closed | c. 1870 |
Geography | |
Start point | River Thames |
End point | Cassington Wharf |
The Cassington Canal (also known as the Cassington Cut[3] or the Evenlode Cut[4]) was an early 19th-century canal near Eynsham, Oxfordshire.[5] The canal was built by the 4th Duke of Marlborough to provide a link between the River Thames and Cassington Mill; it later provided alternative wharfage to that at Eynsham. The 0.75-mile (1.21 km) canal was in operation for less than 70 years, its use declining with the advent of rail transport.
The canal's primary use was to connect the Duke's salt works with the network of canals, rivers, and other inland waterways, as well as connecting the Oxford Canal and the Thames and Severn Canal.
Cite error: There are <ref group=lower-alpha>
tags or {{efn}}
templates on this page, but the references will not show without a {{reflist|group=lower-alpha}}
template or {{notelist}}
template (see the help page).