Cimarron-class oiler (1939)

USS Mississinewa
Class overview
NameCimarron class
Operators United States Navy
Preceded byKaweah class
Succeeded byChicopee class
Subclasses
  • Ashtabula class
  • Mispillon class
Built1938–1945
In commission1939–1992
Completed35, later 4 converted to escort carriers
Lost2
Retired29
General characteristics
TypeOil tanker
Displacement
  • 7,470 long tons (7,590 t) light
  • 24,830 long tons (25,228 t) full load
Length553 ft (169 m)
Beam75 ft (23 m)
Draft32 ft 4 in (9.86 m)
PropulsionGeared turbines, twin screws, 13,500 shp (10,067 kW)
Speed18 knots (21 mph; 33 km/h)
Range12,100 nmi (22,400 km; 13,900 mi)
Capacity146,000 barrels (23,200 m3)
Complement304
Armament
General characteristics
Class and typeAshtabula-class oiler (Jumboized Cimarron)
Displacement
  • 12,840 tons (light);
  • 33,987 tons (full load)
Length644 ft (196 m)
Beam75 ft (23 m)
Draft34 ft 9 in (10.59 m)
Installed power13,500 hp (10,100 kW)
Propulsiongeared turbines, four boilers, twin screws
Speed16 knots (30 km/h)
Capacity180,000 barrels (29,000 m3) of fuel oil
Complement304 (as USS)
Crew108 civilians plus U.S. Navy detachment (as USNS)
Notes"Jumboization" involved the lengthening of the hull and installation of additional cargo capacity during 1965–66

The Cimarron-class oilers were an underway replenishment class of oil tankers which were first built in 1939 as "National Defense Tankers," United States Maritime Commission Type T3-S2-A1, designed "to conform to the approved characteristics for naval auxiliaries in speed, radius and structural strength", anticipating their militarization in the event of war. "Tentative plans had been reached with the Standard Oil Company of New Jersey to build ten high-speed tankers with the government paying the cost of the larger engines needed for increased speed. By the first week in December [1937], Standard Oil had solicited and received bids from a number of yards providing for the construction of a number of 16,300-ton (deadweight) capacity tankers. Bids were requested for two versions: a single-screw design of 13 knots and a twin-screw design of 18 knots. The price difference between the two would be used to establish the government's cost subsidy for greater speed. Plans and specifications for both designs were prepared for Standard Oil by naval architect E. L. Stewart. It seems certain that the design for the 18-knot tanker (Standard Oil Co. of New Jersey Design No. 652 NDF) evolved out of the bureau's (C&R) design for a fleet oiler."[1]

Three of the original twelve ships were commissioned directly into the Navy at launch in 1939; the remainder entered merchant service with Standard Oil of New Jersey and Keystone Tankships before being acquired under the Two-Ocean Navy Act of July 1940. A further eighteen were built for the Navy between 1943 and 1946, with five additional units, sometimes called the Mispillion class, built to the slightly larger Type T3-S2-A3 design.

Four of the Cimarrons were converted to escort carriers in 1942; two others were sunk by enemy action.

  1. ^ Wildenberg, Thomas (1996). Gray Steel and Black Oil: Fast Tankers and Replenishment at Sea in the U.S. Navy, 1912–1995. Annapolis, Maryland: Naval Institute Press. Retrieved 16 October 2013.