Combat-net radio

This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages) This article includes a list of references, related reading, or external links, but its sources remain unclear because it lacks inline citations. Please help improve this article by introducing more precise citations. (January 2013) (Learn how and when to remove this message) The examples and perspective in this article deal primarily with the United States and do not represent a worldwide view of the subject. You may improve this article, discuss the issue on the talk page, or create a new article, as appropriate. (December 2010) (Learn how and when to remove this message) (Learn how and when to remove this message)

In telecommunications, a combat-net radio (CNR) is a radio operating in a network that (a) provides a half-duplex circuit and (b) uses either a single radio frequency or a discrete set of radio frequencies when in a frequency hopping mode.

CNRs are primarily used for push-to-talk-operated radio nets for command and control of combat, combat support, and combat service support operations among military ground, sea, and air forces.

In the United States, two military standards govern the use of combat net radios and the host applications that communicate over the network: MIL-STD-188-220 and MIL-STD-2045-47001. In addition to IETF RFCs governing UDP, TCP, and IPv4/IPv6, all seven layers of the OSI communications architecture are addressed. MIL-STD-2045-47001 covers layer 7 (application), while MIL-STD-188-220 covers layers 1 through 3 (physical, data link, and network).