Common Berthing Mechanism

Common Berthing Mechanism
STS-92 MS Wisoff peers between CBMs.
TypeNon-androgynous berthing mechanism
Developer
Length~16 in (0.4 m)[1]
Diameter~71 in (1.8 m)[1]
First use11 October 2000
Active CBM (Type I)
Mass540 lb (240 kg) (specified)[1]
Active CBM (Type II)
Mass685 lb (311 kg) (specified)[1]
Passive CBM
Mass440 lb (200 kg) (specified)[1]

The Common Berthing Mechanism (CBM) connects habitable elements in the US Orbital Segment (USOS) of the International Space Station (ISS). The CBM has two distinct sides that, once mated, form a cylindrical vestibule between modules. The vestibule is about 16 inches (0.4 m) long and 6 feet (1.8 m) across. At least one end of the vestibule is often limited in diameter by a smaller bulkhead penetration.

The elements are maneuvered to the berthing-ready position by a Remote Manipulator System (RMS). Latches and bolts on the active CBM (ACBM) side pull fittings and floating nuts on the passive CBM (PCBM) side to align and join the two.

After the vestibule is pressurized, crew members clear a passage between modules by removing some CBM components. Utility connectors are installed between facing bulkheads, with a closeout panel to cover them. The resulting tunnel can be used as a loading bay, admitting large payloads from visiting cargo spacecraft that would not fit through a typical personnel passageway.

  1. ^ a b c d e Cite error: The named reference Note048 was invoked but never defined (see the help page).