Contender (dinghy)

Contender
International maritime signal flag 'Charly'
A Contender on reach at the 1998 worlds
Development
DesignerBen Lexcen
LocationAustralia
Year1967
DesignOne-Design
RoleFleet racing
Boat
Crew1
Draft1,447 mm (57.0 in)
TrapezeSingle trapeze
Hull
TypeMonohull
ConstructionGRP
Wood
Composite (Wood/GRP)
Hull weight83 kg (183 lb)
LOA4,875 mm (191.9 in)
Beam1,500 mm (59 in)
Hull appendages
Keel/board typeCentreboard
Rudder(s)skeg hung
Rig
GeneralBermuda rig
I foretriangle height4,345 mm (171.1 in)
J foretriangle base1,250 mm (49 in)
P mainsail luff3,050 mm (120 in)
E mainsail foot2,700 mm (110 in)
Mast length6,427 mm (253.0 in)
Sails
Mainsail area10.8 m2 (116 sq ft)
Racing
D-PN90.1[1]
RYA PN970[2]
Class is a member of World Sailing

The International Contender is a single-handed high performance sailing dinghy, designed by Bob Miller, latterly known as Ben Lexcen, (Australia) in 1967 as a possible successor to the Finn dinghy for Olympic competition.[3][4]

The Contender is recognised as an International Class by World Sailing, the governing body of sail boat racing, which administers the class rules.

  1. ^ "Centerboard Classes". US Sailing. Archived from the original on 16 August 2012. Retrieved 31 July 2012.
  2. ^ "Portsmouth Number List 2017". Royal Yachting Association. Archived (PDF) from the original on 30 June 2017. Retrieved 22 July 2017.
  3. ^ Henshall, David (2010). 'Hooked On! The International Contender Story. Matador. ISBN 978-1-84876-318-0.
  4. ^ "The history of the contender class". International Contender Association. Archived from the original on August 13, 2017. Retrieved August 11, 2017.