Crosscut saw

This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages) The examples and perspective in this article may not represent a worldwide view of the subject. You may improve this article, discuss the issue on the talk page, or create a new article, as appropriate. (March 2010) (Learn how and when to remove this message) This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Crosscut saw" – news · newspapers · books · scholar · JSTOR (April 2011) (Learn how and when to remove this message) (Learn how and when to remove this message)

A crosscut saw (thwart saw) is any saw designed for cutting wood perpendicular to (across) the wood grain. Crosscut saws may be small or large, with small teeth close together for fine work like woodworking or large for coarse work like log bucking, and can be a hand tool or power tool.

The cutting edge of each tooth is angled in an alternating pattern. This design allows each tooth to act like a knife edge and slice through the wood in contrast to a rip saw, which tears along the grain, acting like a miniature chisel. Some crosscut saws use special teeth, called rakers, designed to clean out the cut strips of wood from the kerf. Crosscut saws generally have smaller teeth than rip saws.

Some saws, such as Japanese saws and those used by the ancient Egyptians, are designed to cut only on the pull stroke. Western saws, on the other hand, are designed to cut on the push stroke.^{[citation needed]} Cross cut saws designed for log bucking and tree felling are designed to cut on the pull stroke.