DB Class 23

DB Class 23
23 042 in Darmstadt-Kranichstein, May 2005
Type and origin
Power typeSteam
Builder
Build date1950–1959
Total produced105
Specifications
Configuration:
 • Whyte2-6-2
 • UIC1′C1′ h2
 • GermanP 35.18
Gauge1,435 mm (4 ft 8+12 in)
Leading dia.1,000 mm (3 ft 3+38 in)
Driver dia.1,750 mm (5 ft 8+78 in)
Trailing dia.1,250 mm (4 ft 1+14 in)
Tender wheels1,000 mm (3 ft 3+38 in)
Wheelbase:
 • Axle spacing
(Asymmetrical)
  • 2,950 mm (9 ft 8+18 in) +
  • 2,000 mm (6 ft 6+34 in) +
  • 2,000 mm (6 ft 6+34 in) +
  • 2,950 mm (9 ft 8+18 in) =
 • Engine9,900 mm (32 ft 5+34 in)
 • Tender
  • 1,900 mm (6 ft 2+34 in) +
  • 1,900 mm (6 ft 2+34 in) +
  • 1,900 mm (6 ft 2+34 in) =
  • 5,700 mm (18 ft 8+38 in)
 • incl. tender17,625 mm (57 ft 9+78 in)
Length:
 • Over buffers21,325 mm (69 ft 11+58 in)
Height4,550 mm (14 ft 11+18 in)
Axle load18.7 tonnes (18.4 long tons; 20.6 short tons)
Adhesive weight56.0 tonnes (55.1 long tons; 61.7 short tons)
Empty weight74.6 tonnes (73.4 long tons; 82.2 short tons)
Service weight82.8 tonnes (81.5 long tons; 91.3 short tons)
Tender type2′2′ T 31
Fuel typeCoal
Fuel capacity8 tonnes (7.9 long tons; 8.8 short tons)
Water cap.31 m3 (6,800 imp gal; 8,200 US gal)
Firebox:
 • Grate area3.11 m2 (33.5 sq ft)
Boiler:
 • Pitch3,250 mm (10 ft 8 in)
 • Tube plates4,000 mm (13 ft 1+12 in)
 • Small tubes44.5 mm (1+34 in), 130 off
 • Large tubes118 mm (4+58 in), 54 off
Boiler pressure16 bar (16.3 kg/cm2; 232 psi)
Heating surface:
 • Firebox17.10 m2 (184.1 sq ft)
 • Tubes64.53 m2 (694.6 sq ft)
 • Flues74.65 m2 (803.5 sq ft)
 • Total surface156.28 m2 (1,682.2 sq ft)
Superheater:
 • Heating area73.80 m2 (794.4 sq ft)
CylindersTwo, outside
Cylinder size550 mm × 660 mm (21+58 in × 26 in)
Valve gearHeusinger (Walschaerts)
Performance figures
Maximum speed
  • forwards: 110 km/h (68 mph)
  • backwards: 85 km/h (53 mph)
Career
OperatorsDeutsche Bundesbahn
Numbers23 001 – 23 105
Retiredby 1976

The steam locomotives of Class 23 were German passenger train locomotives developed in the 1950s for the Deutsche Bundesbahn. They had a 2-6-2 wheel arrangement and were equipped with Class 2'2' T 31 tenders. They were designed to replace the once ubiquitous Prussian P 8 engines that had been built between 1908 and 1924 and, in their day, were the most numerous post-war replacement class.[1]

  1. ^ Ransome-Wallis, P. (1959). Illustrated Encyclopedia of World Railway Locomotives (2001 republication ed.). Dover Publications, Inc. p. 357. ISBN 0-486-41247-4.