This article needs additional citations for verification. (July 2011) |
A disk read-and-write head is the small part of a disk drive that moves above the disk platter and transforms the platter's magnetic field into electric current (reads the disk) or, vice versa, transforms electric current into magnetic field (writes the disk).[1] The heads have gone through a number of changes over the years.
In a hard drive, the heads fly above the disk surface with clearance of as little as 3 nanometres. The flying height has been decreasing with each new generation of technology to enable higher areal density. The flying height of the head is controlled by the design of an air bearing etched onto the disk-facing surface of the slider. The role of the air bearing is to maintain the flying height constant as the head moves over the surface of the disk. The air bearings are carefully designed to maintain the same height across the entire platter, despite differing speeds depending on the head distance from the center of the platter.[2] If the head hits the disk's surface, a catastrophic head crash can result. The heads often have a diamond-like carbon coating.[3]
{{cite web}}
: CS1 maint: numeric names: authors list (link)