 | This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages)
|
A double-deck elevator or double-deck lift is an elevator where one cab is stacked on top of another. This allows passengers on two consecutive floors to be able to use the elevator simultaneously, significantly increasing the passenger capacity of an elevator shaft. Such a scheme can improve efficiency in buildings where the volume of traffic would normally have a single-deck elevator stopping at every floor. For example, a passenger may board the lower deck (which serves only odd-numbered floors) at basement level while another passenger may board the upper deck (which serves even-numbered floors) on the ground floor—the cab serving even floors is on top of the cab serving odd floors.
Double-deck elevators occupy less building core space than traditional single-deck elevators do for the same level of traffic. In skyscrapers, this allows for much more efficient use of space as the floor area required by elevators is significant.
The other main technique for reducing the floor area occupied by elevators is shared-shaft elevators where multiple elevators use different sections of the same shaft to serve different floors with skylobbies separating the sections. The Thyssenkrupp TWIN elevator places 2 independent elevator cabs in 1 shaft and the Thyssenkrupp MULTI system places several elevator cabs in one shaft—each cab is equipped with its own, independent linear motor and can move vertically but also horizontally from one shaft to another.[1][2]