 | This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages)
|
&sq=&lang=&file=File:Question_book-new.svg){kind=small}
&sq=&lang=&file=File:Bar_drawing.svg)
Drawing is a manufacturing process that uses tensile forces to elongate metal, glass, or plastic. As the material is drawn (pulled), it stretches and becomes thinner, achieving a desired shape and thickness. Drawing is classified into two types: sheet metal drawing and wire, bar, and tube drawing. Sheet metal drawing is defined as a plastic deformation over a curved axis. For wire, bar, and tube drawing, the starting stock is drawn through a die to reduce its diameter and increase its length. Drawing is usually performed at room temperature, thus classified as a cold working process; however, drawing may also be performed at higher temperatures to hot work large wires, rods, or hollow tubes in order to reduce forces.[1][2]
Drawing differs from rolling in that pressure is not applied by the turning action of a mill but instead depends on force applied locally near the area of compression. This means the maximal drawing force is limited by the tensile strength of the material, a fact particularly evident when drawing thin wires.[3]
The starting point of cold drawing is hot-rolled stock of a suitable size.
- ^ Degarmo, p. 432.
- ^ Kalpakjian, pp. 415–419.
- ^ Ganoksin Project. "Rolling and Drawing". Archived from the original on 2014-08-08.