EMD F40PH

EMD F40PH / F40PHR
Amtrak No. 315 F40PHR on the eastbound California Zephyr at Tunnel No. 17 near Newcastle, California in 1995
Type and origin
Power typeDiesel-electric
BuilderGM Electro-Motive Division (EMD)
General Motors Diesel (GMD)
Morrison-Knudsen (MK)
MotivePower (MPI)
Build date
  • 1975–1992 (EMD)
  • 1988–1998 (MK / MPI)
Total produced
  • 475 (EMD)
  • 31 (MK / MPI)
Specifications
Configuration:
 • AARB-B
 • UICBo'Bo'
Gauge4 ft 8+12 in (1,435 mm) standard gauge
TrucksBlomberg M
Length56 ftin (17.12 m)
Width10 ftin (3.23 m)
Height15 ft 7.5 in (4.763 m)
Loco weight260,000–282,000 lb (118,000–128,000 kg)
Prime moverEMD 16-645E3
Engine typeV16 Diesel
AlternatorAR10/D14
Traction motorsD77
Cylinders16
Performance figures
Maximum speed103–110 mph (166–177 km/h)
Power output3,000–3,200 hp (2.2–2.4 MW)
[1]

The EMD F40PH is a four-axle 3,000–3,200 hp (2.2–2.4 MW) B-B diesel-electric locomotive built by General Motors Electro-Motive Division in several variants from 1975 to 1992. Intended for use on Amtrak's short-haul passenger routes, it became the backbone of Amtrak's diesel fleet after the failure of the EMD SDP40F. The F40PH also found widespread use on commuter railroads in the United States and with VIA Rail in Canada. Additional F40PH variants were manufactured by Morrison-Knudsen and MotivePower between 1988 and 1998, mostly rebuilt from older locomotives.

Amtrak retired its fleet of F40PHs in the early-2000s in favor of the GE Genesis, but the locomotive remains the mainstay of VIA Rail's long-distance trains; a depiction of the locomotive hauling The Canadian is featured on the reverse of the Frontier series Canadian $10 bill. The F40PHs are still a common sight on many other commuter railroads throughout the United States. In addition, Amtrak has kept 22 of its F40PHs in use as non-powered control units.[2]

  1. ^ Cite error: The named reference McDonnell-2015-202 was invoked but never defined (see the help page).
  2. ^ Simon & Warner 2011, p. 42